A Memorial to Kreij - Gone 9 years but never forgotten- check out the latest build(s)

OneMoar · Apr 6, 2016

Sasqui said:
Nononooo the shiny side pokes out from your rear veiw mirror. The big threaded holes are for secure mounting to your windshield.

nope we use special window shield epoxy for that
its U/V curing

jboydgolfer · Apr 6, 2016

Coming along nicely, 24 pi cable barely made it to the mobo....

JATownes · Apr 6, 2016

Damn...That's a really nice chassis!

JAT

OneMoar · Apr 6, 2016

jboydgolfer said:
Coming along nicely, 24 pi cable barely made it to the mobo....

trouble getting it in the hole?: use some lube next time

ThE_MaD_ShOt · Apr 6, 2016

Sasqui said:
Nononooo the shiny side pokes out from your rear veiw mirror. The big threaded holes are for secure mounting to your windshield.

Actually I though the big holes where mounting holes and you are supposed to drill holes through the cpu and socket for the bolts.

jboydgolfer · Apr 6, 2016

Kids are about to start getting home from school, so i need to halt the build for now, but heres my progress so far. Rad mounted, cpu block mounted, hdd mounted, fan hub good to go, just need tubing, resevoir, gpu, and distilled agua.sorry lighting isnt so great....

Also, one thing to complain about....Fu@#ing zip ties....the bane of my existence.

jboydgolfer · Apr 6, 2016

Sorry for double post,im having trouble inserting into the older post on my tablet,but heres one more pic with better lighting...
its too bad this case has SO few expansion slots

Norton · Apr 7, 2016

Countdown...... 2 days to go!!!

We will close the entries on Friday and draw the winners over the weekend.

Opt in now to get your name on the list folks... time is running low!

Link to the prizes and how to opt in:
http://www.techpowerup.com/forums/threads/a-memorial-to-kreij-spring-2016-giveaway-open-opt-in-for-some-great-stuff.202061/page-68#post-3436050

jboydgolfer · Apr 7, 2016

got some bad news today.

I was setting up the Pump/Res for testing outside of the PC for obvious reasons, and instead of water pumping, i got Pump smoking/ O_O. likely going to need to order a pump now. this pump is from the GPU setup I have had for a while, and is not newly ordered from this build, but I dont know why it quit today tho.

OneMoar · Apr 7, 2016

jboydgolfer said:
got some bad news today.

I was setting up the Pump/Res for testing outside of the PC for obvious reasons, and instead of water pumping, i got Pump smoking/ O_O. likely going to need to order a pump now. this pump is from the GPU setup I have had for a while, and is not newly ordered from this build, but I dont know why it quit today tho.

once you let the testing smoke out , there is no putting it back on next time pics of fire in progress please
@ModMyMods what you got in stock for pumps

jboydgolfer · Apr 7, 2016

yeah.
it was my fault too. I just realized the O-ring is fatigued in a small section, and thats why it ran for a couple seconds, it took a bit for the water to make it past the damaged O-ring, and into the pump's circuit board. FFS, i cant believe i didnt notice it was damaged. It LOOKS okay, but If i had taken it off, and looked closer, i would have likely noticed it. Dammit, im pissed @ myself for that.ill buy a new one.

peche · Apr 7, 2016

nice!
@jboydgolfer excellent work on that rig my friend!
@Norton i cant wait for the giveaway, despite my bad luck, i hope everyone gets unlimited fun with this giveaway!

Regards

OneMoar · Apr 7, 2016

don't sweat it could have been worse it could have happened in the machine,caused a leak or fried something

jboydgolfer · Apr 7, 2016

i wonder if i dry it, REALLY good...and tap my Heels together three times, if it will work again

im thinking not, after looking @ the Circuit board now..

its bumpy now

OneMoar · Apr 7, 2016

jboydgolfer said:
i wonder if i dry it, REALLY good...and tap my Heels together three times, if it will work again

im thinking not, after looking @ the Circuit board now.. its bumpy now

bath it in denatured alcohol for a few hours (change the alcohol once) and try it
its hard to tell with the angle you have it at but I don't see any burnt traces

jboydgolfer · Apr 7, 2016

i have it in my Wet Vac intake.
the suction has it stuck to the inlet, and its Turbo drying it. if that doesnt do it, Nothing will.

OneMoar · Apr 7, 2016

jboydgolfer said:
i have it in my Wet Vac intake.
the suction has it stuck to the inlet, and its Turbo drying it. if that doesnt do it, Nothing will.

use the alcohol you can use rubbing if you don't have denatured
the reason is that alcohol will halt any micro corriosion and because water bonds with alcohol and alcohol evaporators rates quickly it dies it
any kind of wet electronics ... stick it in alcohol

dorsetknob · Apr 7, 2016

jboydgolfer said:
i wonder if i dry it, REALLY good...and tap my Heels together three times, if it will work again

Your find yourself in Kansas with the TPU munchkins and the Build will be Delayed

You don't want to get Stuck on the Yellow Bricked Road

jboydgolfer · Apr 7, 2016

you mean soak the Whole thing? like put it in a large container of alcohol and let it sit, then remove, and allow the Alcohol to evaporate? for sterilization

OneMoar · Apr 7, 2016

jboydgolfer said:
you mean soak the Whole thing? like put it in a large container of alcohol and let it sit, then remove, and allow the Alcohol to evaporate? for sterilization

submerge it
just a hour or so soak
then remove and let it air dry
rubbing will work but denatured is better because its water-free tho it will still pull any moisture out of the pcb either way

jboydgolfer · Apr 7, 2016

okay.

OneMoar · Apr 7, 2016

whats concerning is you had smoke which means something shorted if you can pull the pbc from the housing you will know strait away if its fked

jboydgolfer · Apr 7, 2016

OneMoar said:
whats concerning is you had smoke which means something shorted if you can pull the pbc from the housing you will know strait away if its fked

it cant be pulled, i see no way to do so..unless its meant to be just pulled apart. i dont have any real hope of saving it tbh. frankly, the second this happened In my mind, it was no use for this build, because im Certainly not going to put a questionable pump in the winners PC, for Me that isnt acceptable. It was my fault, im responsible, ill need to replace it. thats all there is to it.i appreciate your help tho, thank you.
as you can see in the image below, Lloyd braun is FAR ahead of me

Sasqui · Apr 7, 2016

jboydgolfer said:
i wonder if i dry it, REALLY good...and tap my Heels together three times, if it will work again

im thinking not, after looking @ the Circuit board now.. its bumpy now

Frick frack f*ck

I may have a 655 I'll look tonight

jboydgolfer · Apr 7, 2016

the only thing worse than frying that water pump....????
Blowing up ALL of these damn Balloons for my daughters 8th B-Day....

System Name	RPC MK2.5
Processor	Ryzen 5800x
Motherboard	Gigabyte Aorus Pro V2
Cooling	Enermax ETX-T50RGB
Memory	CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s)	GIGABYTE RTX 3070 Ti GAMING OC
Storage	ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s)	LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case	Phanteks P300 /w 300A front panel conversion
Audio Device(s)	onboard
Power Supply	SeaSonic Focus+ Platinum 750W
Mouse	Kone burst Pro
Keyboard	EVGA Z15
Software	Windows 11 +startisallback

System Name	Americas cure is the death of Social Justice & Political Correctness
Processor	i7-11700K
Motherboard	Asrock Z590 Extreme wifi 6E
Cooling	Noctua NH-U12A
Memory	32GB Corsair RGB fancy boi 5000
Video Card(s)	RTX 3090 Reference
Storage	Samsung 970 Evo 1Tb + Samsung 970 Evo 500Gb
Display(s)	Dell - 27" LED QHD G-SYNC x2
Case	Fractal Design Meshify-C
Audio Device(s)	on board
Power Supply	Seasonic Focus+ Gold 1000 Watt
Mouse	Logitech G502 spectrum
Keyboard	AZIO MGK-1 RGB (Kaith Blue)
Software	Win 10 Professional 64 bit
Benchmark Scores	the MLGeesiest

System Name	Mr. Reliable
Processor	Ryzen R9 5950x
Motherboard	MSI Meg X570s Ace Max
Cooling	D5 Pump, Singularity Top/Res, 2x360mm EK P rads, EK Magnitude/Alphacool Blocks
Memory	32Gb (4x8Gb) Corsair Dominator Platinum 3600Mhz @ 16/19/20/36 1.35v
Video Card(s)	MSI 3080ti with Alphacool Block
Storage	2 x Corsair Force MP400 1TB Nvme; 2 x T-Force Cardea Z340; 2 x Mushkin Reactor 1TB
Display(s)	Acer 32" Z321QU 2560x1440; LG 34GP83A-B 34" 3440x1440
Case	Lian Li PC-011 Dynamic XL; Synology DS218j w/ 2 x 2TB WD Red
Audio Device(s)	SteelSeries Arctis Pro+
Power Supply	EVGA SuperNova 850G3
Mouse	Razer Basilisk V2
Keyboard	Das Keyboard 6; Razer Orbweaver Chroma
Software	Windows 10 Pro

System Name	RPC MK2.5
Processor	Ryzen 5800x
Motherboard	Gigabyte Aorus Pro V2
Cooling	Enermax ETX-T50RGB
Memory	CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s)	GIGABYTE RTX 3070 Ti GAMING OC
Storage	ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s)	LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case	Phanteks P300 /w 300A front panel conversion
Audio Device(s)	onboard
Power Supply	SeaSonic Focus+ Platinum 750W
Mouse	Kone burst Pro
Keyboard	EVGA Z15
Software	Windows 11 +startisallback

System Name	Selene / Yoda
Processor	Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard	Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling	H100i / Xig Dark Knight
Memory	4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s)	Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage	256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207
Case	Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G500s
Keyboard	Corsair Strafe
Software	Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores	What are benchmarks anyway?

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!

System Name	Athenna
Processor	intel i7 3770 Dellided
Motherboard	GIGABYTE GA-Z68X-UD3H-B3 Rev. 1.1
Cooling	Thermaltake Water 3.0 Pro + Tt Riing12 x2 / Tt ThunderBlade / Gelid Slim 120UV fans
Memory	16GB DRR3 Kingoston with Custom Tt spreaders + HyperX Fan
Video Card(s)	GeForce GTX 980 4GB Nvidia Sample
Storage	Crucial M4 SSD 64GB's / Seagate Barracuda 2TB / Seagate Barracuda 320GB's
Display(s)	22" LG FLATRON 1920 x 1280p
Case	Thermaltake Commander G42 Window
Audio Device(s)	On-board Dolby 5.1+ Kingston HyperX Cloud 1
Power Supply	Themaltake TR2 700W 80plus bronce & APC Pro backup 1000Va
Mouse	Tt eSports Level 10M Rev 1.0 Diamond Black & Tt Conkor "L" mouse pad
Keyboard	Tt eSports KNUCKER
Software	windows 10x64Pro
Benchmark Scores	well I've fried a 775' P4 12 years ago, that counts?

System Name	Senile
Processor	I7-4790K@4.8 GHz 24/7
Motherboard	MSI Z97-G45 Gaming
Cooling	Be Quiet Pure Rock Air
Memory	16GB 4x4 G.Skill CAS9 2133 Sniper
Video Card(s)	GIGABYTE Vega 64
Storage	Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue
Display(s)	34" LG 34CB88-P 21:9 Curved UltraWide QHD (34401440) FREE_SYNC*
Case	Rosewill
Audio Device(s)	Onboard + HD HDMI
Power Supply	Corsair HX750
Mouse	Logitech G5
Keyboard	Corsair Strafe RGB & G610 Orion Red
Software	Win 10

A Memorial to Kreij - Gone 9 years but never forgotten- check out the latest build(s)

Will you be donating and/or opting in to win the Kreij Cancer Curing PC?

Yes I plan to donate and will opt in to crunch/fold on the PC to help cure cancer if I win it.

Yes I plan to donate but will allow others a chance to help cure cancer with the PC.

I will opt in to crunch/fold on the PC to help cure cancer if I win it.

I support this project but will allow others a chance to help cure cancer with the PC.

NEW poll option- This is a great project and I hope TPU members keep it going!!!

I will opt in on current/future giveaways and/or support them knowing crunching/folding is optional

There is Always Moar

The Lurker

There is Always Moar

Moderator - Returning from the Darkness

There is Always Moar

Thermaltake fanboy

There is Always Moar

There is Always Moar

There is Always Moar

"YOUR RMA REQUEST IS CON-REFUSED"

There is Always Moar

There is Always Moar