need some help on ocing error's

[Morgoth]

ok i'm having some problems with ocing my cpu when i add another 22mhz and run 3dbenchmark06 my comp shutsdown why is this? i had this before i hited 2752mhz now i dont have those problems on 2752 buth on 2780+
i use clockgen to overclock for specs look at my system sig

 

[DOM]

Cpu might need more volts

 

[Morgoth]

its on 3,440 volts

 

[AphexDreamer]

What are the Temps for your cpu?

 

[DOM]

thats not the real reading it would of burned with that much volts, have you tryed CPU-Z 1.41 ? Cuz in my dell I was getting that to but after 1.41 it shows nothing cuz it cant get the reading

 

[AphexDreamer]

thats not the real reading it would if burned with that much volts, have you tryed CPU-Z 1.41 ? Cuz in my dell I was getting that to but after 1.41 it shows nothing cuz it cant get the reading

Yeah this dudes is right you could also try PC Wizzard 2007, but CPU-Z its the best with out a dought.

 

[Morgoth]

yes is have tryd 1,41 and doest how the volts there

my cpu temps are 32idle and 36at loading (comp is running allday)

 

[AphexDreamer]

yes is have tryd 1,41 and doest how the volts there

my cpu temps are 32idle and 36at loading (comp is running allday)

Try PC WiZZARD 2007 its at the same place you got ClockGen

 

[Morgoth]

i have that

 

[DOM]

does it just shut down or restarts

 

[AphexDreamer]

i have that

Then use it to find the Volt.

 

[Morgoth]

says supported voltage 3,3volts

 

[DOM]

Then use it to find the Volt.

hes not its a prebuilt and most dont come with those sensors

 

[AphexDreamer]

says supported voltage 3,3volts

Yeah don't look for the supported look for the current voltage, to do that you have to go the pic that looks like a processor and it should say the current voltage somewhere der.

 

[DOM]

Prebuilt I have a Dell with a P4 and I was getting the same reading with CPU-Z 1.40.5 and below the only thing that shows up in speedfan is the HD temp no volts

Not even the WR holders use that much volts cuz they cant I think like 1.9v is the highest

So its the cpu isnt is not getting the volts it needs and cant stand the load and turns off or it reboots

 

[Morgoth]

this"??


well in my mobo manual it says supported voltage = 3.3volt

 

[AphexDreamer]

this"??


well in my mobo manual it says supported voltage = 3.3volt

Well yours seems a tad bit diffrent then mine this is what I am talking about

 

[Morgoth]

i dont have that

 

[DOM]

well in my mobo manual it says supported voltage = 3.3volt

Thats for the MEM

 

[AphexDreamer]

i dont have that

ok then Nvm

 

[Morgoth]

is there a way to change the voltage?

 

[Morgoth]

ok i got some more info
this is not 100% correct
Core voltage 1,475-1,55
i/o voltage 1,475-1,55
Idle Performance 38,6-82watt (depends on corespeed)
Maxium performance 49-103watt (depends on corespeed)