Super Pi 1m scores

[cdawall]

If you have time.....speak to G.

i should have the time and i have a 1st page post to put it on

 

[cdawall]

i am now updating the list for G.

new list will be on the 1st page post #6

 

[giorgos th.]

Thanx M8 for the help..
what you can do is update the list,send it to me via pm and i`ll put it in the #1 post with your name on top.

 

[cdawall]

ok i did the best i could updating but i dont know were it got left out so if you got missed repost pls


@ G or it could just get put on post 6 whichever u think is easier

 

[giorgos th.]

i believe putting the list on post #1 is more appropriate...

 

[cdawall]

ok ill send u the one i updated off the last couple pages

 

[Tatty_Two]

Re-posted as you missed mine.............. It's an E6850 by the way, just does not show as I had one core disabled.

 

[giorgos th.]

List is up again thanx to cdawall.

 

[cdawall]

its no prob G

 

[ace80]

I was gonna try this disabling 1 core lark, but can't.
Here's a ss of msconfig but were's the boot.ini tab or option.
Anyother ways of doing it if you can't in bios?

 

[Wile E]

I was gonna try this disabling 1 core lark, but can't.
Here's a ss of msconfig but were's the boot.ini tab or option.
Anyother ways of doing it if you can't in bios?

http://img.techpowerup.org/071209/sm043.jpg

Add the switch /numproc=1 to the end of your boot.ini file.

 

[Tatty_Two]

I was gonna try this disabling 1 core lark, but can't.
Here's a ss of msconfig but were's the boot.ini tab or option.
Anyother ways of doing it if you can't in bios?

Or on a per application basis within windows, so for example you can set to one core for specifically SuperPi but of course that still means you have to boot to windows on 2 cores with your chosen speed but once there stability will be better, but thats the same for Wile E's method, take a look at this guide.....lol I am starting a frenzy here!

http://wiki.onmac.net/index.php/Users/Guides/Disabling_Dual-Core_on_a_per_application_basis

 

[giorgos th.]

you came second M8..
remember my 11.657 @ 4367mhz @ 1 core enabled post?

http://forums.techpowerup.com/showpost.php?p=493851&postcount=1192

 

[Tatty_Two]

you came second M8..
remember my 11.657 @ 4367mhz @ 1 core enabled post?

http://forums.techpowerup.com/showpost.php?p=493851&postcount=1192

yes I know, people have only just grasped it though, I think the 4.4Gig got their attention, you will see in my post on the previous page with the 4.4Gig screenie that I mentioned your help

 

[Basard]

Here's mine. Finally got my overclock smoothed out pretty nicely. X2 4000+ @ 2.62Ghz.

 

[trt740]

great job tatty this was has high as I could go.

great job

 

[Tatty_Two]

Nice! you can see the difference in the voltage requirements on just one core, that took you 1.72V I think I did 4.4Gig on 1.68V, I have not tried higher yet.....anyone for a 4.5Gig club

 

[Deleted member 24505]

My 6750 will post at 4.1ghz(520fsb) with 1.6vcore but not get too windows.i darent try the vcore higher tho'.Once i get my water loop set up tho' i think i will be a bit braver.

 

[trt740]

i think this was pretty good for a quad on air all 4 cores enabled

Nice! you can see the difference in the voltage requirements on just one core, that took you 1.72V I think I did 4.4Gig on 1.68V, I have not tried higher yet.....anyone for a 4.5Gig club

 

[Tatty_Two]

Trt, for a Quad thats awesome, I bet that is one of the fastest Quads on air anywhere around....no doubts!

Here is another run for me, slightly faster, upto about 4.428Gig now....same voltage, I have slowed the memory down a bit, tightened the timings slightly with a slightly better divider, bit quicker SuperPi time but not much, although I spose in this game, anything quicker is good, this chips going on Fleabay at the weekend so I might as well get the most out of it!

 

[giorgos th.]

i`m sure those ballistix of yours can do 5-4-4-4 at 590mhz..................

 

[trt740]

i`m sure those ballistix of yours can do 5-4-4-4 at 590mhz..................

not with this quad for some reason once it get over 4 ghz I cannot run my ram very high, and truely at normal overclocking once I get over 3.4ghz my ram runs only at around drr 1066 to 1100. With my old e6850 my ram would run at almost ddr1300.

 

[giorgos th.]

i was talking about Tatty`s ballistix..

 

[trt740]

i was talking about Tatty`s ballistix..

okay mine will do those speeds aswell sorry or faster

 

[Tatty_Two]

Been playing tonite with memory timings seeing as I have not really tested them yet, interesting results......all on 2.4V with active cooling on them......1365Mhz 5-5-5-15, stable running SuperPi, 2 errors in 2 minutes on memtest. 1350mhz no probs, memtest 20 minutes no errors, now get this.......1000mhz........4-4-3-4!!!

best balance between speed and timings with decent divider......1150mhz.....4-4-4-8. Still a lot to play with, I am running them at the moment at 1120 on 2.3V @ 4-3-4-8

The nice thing is, I paid peanuts for these, bought them as 2 seperate 1GB sticks not as a kit, I still have some brand new Patriot Extreme 6400 2GB kit which are capable of 1200mhz @ 5-5-5-15, that combined with my old Ballistixs 5300's which did 1160 @ 5-5-5-15, plus my old Asus Motherboard and my E6850 all on flea bay will pay form my top of the range Yorkfield in a few weeks (hopefully). Thats if I am patient enuff otherwise I'll have to get a Q6600 as a stopgap