- Joined
- Apr 23, 2006
- Messages
- 3,558 (0.54/day)
- Location
- Enschede, The Netherlands
System Name | Lian Li Carbon fiber ed. |
---|---|
Processor | Intel i5 2500k 4.6Ghz 24/7 Max OC 5Ghz |
Motherboard | Asrock Z68 Extreme3 Gen3 |
Cooling | Swiftech blocks, 360 Xflow rad, Swiftech 120 rad, Liang with XSPC res/pump top. |
Memory | 8Gb Mushkin 1600Mhz 8-9-8-24 |
Video Card(s) | Sapphire HD6950 2Gb |
Storage | OCZ Vertex 4 128 / Western Digital 160 |
Display(s) | ASUS 25,5" wide VW266h |
Power Supply | Corsair HX620 modular |
Software | Windows 7 64 |
I needed one so i build my own.
-2 x 40mmfan
-1 Antec 900 front bay cover.
-1 x thermal sensor with LED reading and 2 diodes.
I had a few extra front covers laying around + a couple 40mm fans and a thermal sensor salvaged from my Antec hd cooler.
It contains 2 diodes and 2 fan connectors so it's really a neat thing
I taped the inside of the cover with some foam tape so the fans would stay in place.
Mounted the fans and the thermal sensor. Once i connected them i tried to keep the wires as far in as possible, So they would not touch the ram.
Going to fix this when i get the new fans. Then i will shorten and solder them. I bend the sides of the cover so i can click them over the edge of the ram. So it it will stay in place.
Pretty simple really. Took me about a hour to make this.
-2 x 40mmfan
-1 Antec 900 front bay cover.
-1 x thermal sensor with LED reading and 2 diodes.
I had a few extra front covers laying around + a couple 40mm fans and a thermal sensor salvaged from my Antec hd cooler.
It contains 2 diodes and 2 fan connectors so it's really a neat thing
I taped the inside of the cover with some foam tape so the fans would stay in place.
Mounted the fans and the thermal sensor. Once i connected them i tried to keep the wires as far in as possible, So they would not touch the ram.
Going to fix this when i get the new fans. Then i will shorten and solder them. I bend the sides of the cover so i can click them over the edge of the ram. So it it will stay in place.
Pretty simple really. Took me about a hour to make this.
Last edited: