Source
New Member
- Joined
- Jan 11, 2008
- Messages
- 22 (0.00/day)
System Name | The Punisher |
---|---|
Processor | Intel Q6600 @ 3.6 1.382v |
Motherboard | Asus Maximus Formula (Rampage Mod) |
Cooling | Kandalf VD4000 LCS |
Memory | 4x1024 Ballistix Tracer DDR2 4-5-4-12 1066MHz 2.12v |
Video Card(s) | Diamond HD3870X2 1GB |
Storage | 74G Raptor 740GD 8MB | 500G WD5000AAKS 16MB |
Display(s) | 24" Westinghouse L2410NM & 19" Dell 1907FP |
Case | Kandalf VD4000 LCS |
Audio Device(s) | Supreme FXII 8.1 | Audio FX Pro 5.1 Headset |
Power Supply | Ultra X2 750W Modular PS |
Software | Windows XP Pro x64 SP2 |
Source,
You need:
solder iron, 100kΩ variable resistor, 2 pieces of thin wire, multimeter
Here's what you need to do:
1. Solder one piece of wire on the middle leg, and the other piece on either of the outer legs.
2. Tune the resistance between the free ends of the wires to 100kΩ.
3. Solder the free end of either wire to a "mod solder point". (refer to the guide pics)
4. Solder the free end of the other wire to a ground. (doesn't matter what ground you use)
5. Done!
Thx bud, off to the store