Bytor
New Member
- Joined
- Jun 27, 2007
- Messages
- 1,051 (0.17/day)
System Name | "The Dark Spider" |
---|---|
Processor | AMD Phenom 9850 @ 3.0 |
Motherboard | Asus M3A79-T |
Cooling | Water: CPU and GPU's, 2 pumps, 2 BIX Rads, D-Tek Fuzion v1, 2 Swiftech MCW60 |
Memory | 4 gigs Crucial Balistix Tracers (1066 @ 1256) |
Video Card(s) | Sapphire 4870x2 |
Storage | WD SATA 640 Gig HDD |
Display(s) | Acer 24" beast... |
Case | Modded Rocketfish |
Audio Device(s) | Onboard (only use head phones) |
Power Supply | 700 watt |
Software | a bunch |
Benchmark Scores | 3D Mark 06: 9859 on 2-X1950 pro's Xfire 3D Mark 06: 12794 on 1-3870 3D Mark 06: 16484 Xfire |
Well the first top that cracked on me that I found on friday may have been from over tightening, but today I looked under my system and found a puddle of coolent coming from the second pump. After removing the pump and top I found a small crack away from any screw hole in a solid part of the top. These new OCLabs tops are not mach. but molded and are very thin walled. The XSPC tops and the like are mach. from thick stock.
You can say what ya like about plexi, but I will never use it in any of my blocks or pumps again.
You can say what ya like about plexi, but I will never use it in any of my blocks or pumps again.