- Joined
- Feb 15, 2007
- Messages
- 1,925 (0.31/day)
Processor | Intel C2D E8500 @ 4.25GHz (1.36V) |
---|---|
Motherboard | Gigabyte GA-X38-DQ6 |
Cooling | (Temporary) Tuniq Tower 120 |
Memory | 2GB Transcend aXeram 1200+ |
Video Card(s) | HIS HD3870 CF Volt modded |
Storage | 3 Seagate 320Gb Barracuda in an Intel Matrix Raid array |
Display(s) | Sony GDM-FW900 24" Widescreen CRT (a.k.a "The Shiznotch") |
Case | Ultra Aluminus Full Tower |
Audio Device(s) | onboard Intel HD audio |
Power Supply | PC Power & Cooling Silencer 750 |
Software | XP MCE + Vista (HP) dual-boot |
Currently I am using two instances of Prime95 large, in-place ffts to test the CPU. Should I be using small ffts to check? Sould I just go with Orthos?
What are the standards that most go by in regards to small/large ffts and Priority level?
I'm currently @ 4.275GHz w/1.408V under load. VID is reported by CPU-z as 1.225.
Thanks guys!
What are the standards that most go by in regards to small/large ffts and Priority level?
I'm currently @ 4.275GHz w/1.408V under load. VID is reported by CPU-z as 1.225.
Thanks guys!