dipsta
New Member
- Joined
- Aug 3, 2008
- Messages
- 269 (0.05/day)
- Location
- Yorkshire UK
System Name | Dark Sideslayer |
---|---|
Processor | Core i5 2500k @5.0GHz @13.84v |
Motherboard | ASRock Z68 Extreme4 Gen3 |
Cooling | MCps655 Pump, XSPC Res, RC360 Rad, EK-Supreme HF Acetal+E |
Memory | CORSAIR VENGEANCE 8GB (2X4GB) DDR3 PC3-15000C9 1866MHZ DUAL CHANNEL KIT |
Video Card(s) | ASUS Direct CU II 1.2v 930/1360 |
Storage | 60gb OCZ Agility 3, 40gb Kingston V Series & 2*500 sata |
Display(s) | Samsung SyncMaster 245B plus |
Case | COOLERMASTER RC1100 COSMOS SPORT customised |
Audio Device(s) | Realtek THX Onboard |
Power Supply | Coolermaster Real power 700W |
Software | Windows 7 Ultimate 64 |
Benchmark Scores | 3d Mark Vantage 22491, 3d Mark06 32242, PC Mark 07 5398, 3d Mark 2011 5983, PC Mark Vanatge 24541 :0 |
Hello Guys i'm new to the forum and this is my first post.
Heres my current spec.
Right i know i made a mistake with regard to the cpu but have currently managed a stable overclock of 3417, 455*7.5@ 1.4V with memory running at 900mhz 2.3v 5 5 5 16.
I'm happy with my overclock but want more. Any tips.
P.s. im idling at 52c and full load at 82c when running prime.
My GPUs are @ stock speeds at the moment, they get very hot. Idling at 76c and load at 88c which is very hot which is why i wont clock them. I can squeeze maybe 670/1070 without problems but after they get far too hot. So i have left them stock until i can get hold of the new scythe twin turbo's.
I have adjusted the side fan to exhaust head from the graphics which make about 4c difference on board temp. so i have left them at that.
Im getting these bench's, 21151 3dmark 05, 16839 3dmark 06, pcmark 05 10852, do these seem reasonable for my spec or is there more to come.
How do i disable speedstep and is it worth doing.
I have ordered some ocz freeze which i will be trying to reduce temps a tad.
There are a load of settings in the bios and this is how i have set mine are these ok?
transaction booster disabled
CPU Pll auto
fsb termination auto
NB voiltage 1.4
SB auto
clock over charging voltage auto
load line calibration auto
cpu ctl auto
mb ctl auto
cpu spread spectrun disabled
pci spread spectrum disabled
FSB strap to north bridge auto
cpu cie enabled
maxcpuid value limit disabled
vanderpool technology enabled
cpu tm enabled
execute enabled.
Im looking for tips on how to get more, can i get more?
Also is it worth disbaling speedstep?
Are my benchs any good? or should i expect more from my system?
Kind regards
And thanks for viewing.
Heres my current spec.
- Q9300 (Sadly)
- NZXT LEXA case, 120mm fan in front 1 120mm fan out side and 1 back, 1 80mm top out and 1 80mm bottom in
- 2*2gb pc6400 4 4 4 15 OCZ REAPER
- ASUS p5Q-E
- 500gb SATA
- 2* Gigabyte 4850 in Crossfire
- Coolermaster 700w PSU
- Asetek LCLC cpu cooler
Right i know i made a mistake with regard to the cpu but have currently managed a stable overclock of 3417, 455*7.5@ 1.4V with memory running at 900mhz 2.3v 5 5 5 16.
I'm happy with my overclock but want more. Any tips.
P.s. im idling at 52c and full load at 82c when running prime.
My GPUs are @ stock speeds at the moment, they get very hot. Idling at 76c and load at 88c which is very hot which is why i wont clock them. I can squeeze maybe 670/1070 without problems but after they get far too hot. So i have left them stock until i can get hold of the new scythe twin turbo's.
I have adjusted the side fan to exhaust head from the graphics which make about 4c difference on board temp. so i have left them at that.
Im getting these bench's, 21151 3dmark 05, 16839 3dmark 06, pcmark 05 10852, do these seem reasonable for my spec or is there more to come.
How do i disable speedstep and is it worth doing.
I have ordered some ocz freeze which i will be trying to reduce temps a tad.
There are a load of settings in the bios and this is how i have set mine are these ok?
transaction booster disabled
CPU Pll auto
fsb termination auto
NB voiltage 1.4
SB auto
clock over charging voltage auto
load line calibration auto
cpu ctl auto
mb ctl auto
cpu spread spectrun disabled
pci spread spectrum disabled
FSB strap to north bridge auto
cpu cie enabled
maxcpuid value limit disabled
vanderpool technology enabled
cpu tm enabled
execute enabled.
Im looking for tips on how to get more, can i get more?
Also is it worth disbaling speedstep?
Are my benchs any good? or should i expect more from my system?
Kind regards
And thanks for viewing.
Last edited: