The E7200 Overclockers Club

[trt740]

I wish ya all the best, I just hope to hell they didnt release another E2200. You know the later crap version!

if that happens back it goes.

 

[nINJAkECIL]

stable clock for hours (so far), don't ask for the orthos thing. not very friendly with my rig.
gaming for hours, all 3DMark, passed, but not pass even 10s of orthos

@1,45v on air, Thermalright Ultra 120 Extreme, dual fan:

this one stable for Superpi all the way to 4M (1,515v)

and this is suicide clock so far:

 

[sneekypeet]

1.616V to run 4.0GHz!!!!!!!!

 

[nINJAkECIL]

1,45v set on bios mate.vdrop on my mobo is bad. I have to mod my mobo (Abit IX38 QuadGT)

notice the other SS? it's written 1,424v on CPU-Z. CPU-Z detects it wrong
how come it runs 1,616v @4ghz, and 1,424@4,1ghz? lol

and, I do wonder, why the other E7200 doesn't has L3 Cache on the CPU-Z while mine does has?
looking at the page 1 (http://img.techpowerup.org/080711/OC RESULT.jpg), using CPU-Z 1.46.
same revision, same stepping.....wth

 

[sneekypeet]

1,45v set on bios mate.vdrop on my mobo is bad. I have to mod my mobo (Abit IX38 QuadGT)

notice the other SS? it's writted 1,424v on CPU-Z. CPU-Z detects it wrong
how come it runs 1,616v @4ghz, and 1,424@4,1ghz? lol

I saw both shots, Just couldnt believe what I was seeing, thats why I replied. Was hoping you might clerify what was going on!

 

[nINJAkECIL]

might kill the chips with that voltage
even if the temp is under control

 

[sneekypeet]

might kill the chips with that voltage
even if the temp is under control

Ive already run 1.55V thro mine for benching and we havent even gotten to what I might push this winter in Ohio with the windows open...lol!

 

[Tatty_Two]

Can I ask, are these chips CPU limited or FSB limited, I have been looking at the E7300 myself but wondering if it will give me as much as my baby E8200 will, with this one to get it to 4.5gig on it's 8x multi I obviously need to go 470mhz + which isnt a problem for this board, am wondering with the higher multi on the 7300 (which are about the same in price over here as the E8200) if the 7300 might have potential to hit 4.5gig.....I like a challenge!

Tom.....keep me posted........if you can hit 4.4gig I know I'll do 4.5.........

 

[sneekypeet]

Can I ask, are these chips CPU limited or FSB limited, I have been looking at the E7300 myself but wondering if it will give me as much as my baby E8200 will, with this one to get it to 4.5gig on it's 8x multi I obviously need to go 470mhz + which isnt a problem for this board, am wondering with the higher multi on the 7300 (which are about the same in price over here as the E8200) if the 7300 might have potential to hit 4.5gig.....I like a challenge!

Tom.....keep me posted........if you can hit 4.4gig I know I'll do 4.5.........

I have yet to breah the 475 barrier on mine, I was assuming it was a heat issue, but I havent even played with a 6X multi yet. Using setFSB in windows and 1.55V set in bios, I get a lockup at 475X9.5 with everything else in check!

 

[Tatty_Two]

I have yet to breah the 475 barrier on mine, I was assuming it was a heat issue, but I havent even played with a 6X multi yet. Using setFSB in windows and 1.55V set in bios, I get a lockup at 475X9.5 with everything else in check!

Would you try dropping the multi to see if it's a FSB limit......sometime..(as opposed to the chip just not doing that speed).....unfortunatly I cant use SetFSB with an NVidia chipset

 

[sneekypeet]

Would you try dropping the multi to see if it's a FSB limit......sometime..(as opposed to the chip just not doing that speed).....unfortunatly I cant use SetFSB with an NVidia chipset

np Tatty Ill try a huge bump on the NB and see if I can get 500X6...seems that should post easy enough!

 

[sneekypeet]

UPDATE: wont post @ 500X6 with what I know is enough voltage!

 

[Tatty_Two]

UPDATE: wont post @ 500X6 with what I know is enough voltage!

That would suggest it is FSB limited then, could you try sometime when you have a few minutes doing 6x480.

Ta

 

[sneekypeet]

That would suggest it is FSB limited then, could you try sometime when you have a few minutes doing 6x480.

Ta

in the midst of a move now, but will give it a whirl before you get up in the morning! I realize its getting late there!

 

[trt740]

That would suggest it is FSB limited then, could you try sometime when you have a few minutes doing 6x480.

Ta

seen them as high a 620 fsb, heres a e7300 benching at 590FSB http://valid.x86-secret.com/show_oc.php?id=331464 8190 is a error thats how cpuz reads the e7300, these are just like the e8500 etc wolfies they have high FSB as far as I know.

hereis a bunch of post some hitting 8x500 stable 24/7 with e7200 http://valid.x86-secret.com/show_oc.php?id=331464 One e7200 is hitting 558FSB on this thread(it is using crazy voltage).

 

[fakehate]

e7200

Just wanted to ask all the e7200 owners out there what they think of this, is the voltage being reported wrong or what?

Thanks for your help there!

 

[trt740]

Just wanted to ask all the e7200 owners out there what they think of this, is the voltage being reported wrong or what?

Thanks for your help there!

na that could be right several chips I have owned would do 1.v at stock.

 

[sneekypeet]

seen them as high a 620 fsb, heres a e7300 benching at 590FSB http://valid.x86-secret.com/show_oc.php?id=331464 8190 is a error thats how cpuz reads the e7300, these are just like the e8500 etc wolfies they have high FSB as far as I know.

hereis a bunch of post some hitting 8x500 stable 24/7 with e7200 http://valid.x86-secret.com/show_oc.php?id=331464 One e7200 is hitting 558FSB on this thread.

It may be I have a shit CPU? but 2 different mobo's limit the same FSB, so I had assumed it was the CPU.

I do agree that alot of ppl can go higher, but from what I see it usually has Phase or better cooling involved!

 

[trt740]

It may be I have a shit CPU? but 2 different mobo's limit the same FSB, so I had assumed it was the CPU.

I do agree that alot of ppl can go higher, but from what I see it usually has Phase or better cooling involved!

I don't think so several people report these are just regular wolfies with reduced on chip cache in these threads. I see 3 8x500 on air, with low voltage on that thread. I'm also seeing lots of 484 FSB etc on other threads. It could be but with 9.5x and 10x multiplers high fsb is not needed.

 

[sneekypeet]

I don't think so several people report these are just regular wolfies with reduced on chip cache in these threads. I see 3 8x500 on air, with low voltage on that thread.

Im not trying to start a war or anything, but 3 people arent really an average of CPU's. On a whole from what I have seen and heard from close friends is that none of us have posted over 500!

I do think the boys who can do over 500 have primo samples!

 

[trt740]

Im not trying to start a war or anything, but 3 people arent really an average of CPU's. On a whole from what I have seen and heard from close friends is that none of us have posted over 500!

could be and we will see read my edit aswell above. Several review sites agree with you Pete.

 

[sneekypeet]

could be and we will see read my edit aswell above.

caught edit after posting and amended mine as well!

 

[xu^]

got me a new freezer pro and an Antec 300 case on its way ,should arrive later today,so ill be able to have play at last

shame the stock cooler on the E7200 is so weedy

 

[kuroikenshi]

Welp iv had my E7200 for a few weeks and im sitting at 3.54 with a 1.36 vcore. Im trying to push my cpu as far as it can go and I would like the nice round number of 3.6.

Link below has all my info. I had posted it in the OC section of the forums but nothing.

My thread

Any suggestions on how I can get a little bit more juice out of this baby?

 

[sneekypeet]

Welp iv had my E7200 for a few weeks and im sitting at 3.54 with a 1.36 vcore. Im trying to push my cpu as far as it can go and I would like the nice round number of 3.6.

Link below has all my info. I had posted it in the OC section of the forums but nothing.

My thread

Any suggestions on how I can get a little bit more juice out of this baby?

Posted to try to lend a little help in your linked thread!