Recent content by boxa

Ifits any use to you, then the default's are; username: admin password: admin MUST be in lower case btw Same goes for anyone puzzled with ATI WebPAM

Where did you get RAIDxpert from? I have the Asus M3A32 and on the driver disk I have ATI Webpam which is about the same thing, god knows what the username and password is on the login page... Anyways hope this helps; "AMD RAIDXpert Easily configure your RAID setup from remote locations to...

^^ Your siggy pic just says it all :D

is that on air? What settings are you using?

regarding the partitioning, I think I could have reduced my temp/pagefile partition to maybe 10GB and have this added to the programs/games install partition/drive, I tried to install everything I could possibally think of, all my games were installed, I have some more steam games too but they...

1.45 for 3225 is a little high for me, what type of HSF are you using? brings me onto this, I made a thread regarding HSF but no replies so if anyone here can help, thanks http://forums.techpowerup.com/showthread.php?t=59509 "Im using an Akasa AK-925 CPU cooler but wanted to know what...

Np mate,

since updating bios and isntall vista I cannot get that OC or higher then 3.2 (may try 3.3) without a BSOD, this normally means voltage is too low? tried taking upto 1.45v :(

What Clock skew in bios do you guys have? Iv got it set at advance 150bs, lowering is better, or higher is better? anyhow, I tried 248x13 3.4375(shows as 3.44)v and it crashes in 3dmark and I get windows explorer errors, so no need to test any more. Iv tried the above settings with...

Hi, Im using an Akasa AK-925 CPU cooler but wanted to know what other's are using on the same board, I bought TRUE 120 but with the CPU fitting's being Verticle and the RAM slots so close this will not fit, it covers 3 of the four 4 ram slots and is horizontal so the fans would blow up towards...

Filled in my specs in sigg now, check it out and tell me what you think

when I get some time I'l post my comp spec in siggy and links in a post, Iv recently justt done raid 0 so Im kinda testing that (first time Iv ever looked at raid setups). Still I couldnt help try some OC's :D with a 200FSB I think my highest was 3.4 or 3.6 stable cant remember volts but...

update since setting up raid the Sata optical (CD/DVD/re-writer etc.....) dont show in bios or on boot list so basically untill windows loads they are not accesible which meant I had to take out the ancient IDE connector and link up DVD drive from my ex rig. Ive google "setting up raid M3A32"...

This is related to the HDMI built in audio on tha HD3800 series... Im guessing your using Vista as Ive used Xp prior to vista with my HD3870 which recognised it correctly as "ATI HDMI audio", it would also default the sound output to this but can easily be changed via control panel. Since...

forgot to mention my ram is set at 2.14v anyhow Iv tried taking cpu voltage upto 1.45 but as its stated thats the highest acceptable voltage for this cpu (something along them lines) I dont want to be taking it up any higher then that... Iv noticed not many people going above the 250 FSB, so...