Recent content by Gus

Found a couple the same physically under the name LogiLink and KONIG There are three chips on the PCB inside. 13F-39NL GL850G with markings HHIGDO8G22 and 041SR77941 EST E1868M4-B with markings 30FFLiG and P7NT6-010 1105 The underside of the PCB is marked EUS-168H4 V1.1 Apart from the box...

There are no other markings on the box or the device itself. It is made in China, like everything these days. I pulled the PCB out of the housing. There are three chips 13F-39NL, GL805G with markings HH1GD08G22 and 41SR77941 and the last one EST E1868M4-B with other markings 30FFL-1G...

I only run Linux machines. Most run Fedora, currently Fedora 20 64 bit. I have been given a 4 post USB hub with a Ethernet LAN interface. Has any one any idea how to get it working on a Linux box?. I have seen it working on a windows machine. It has an IP address, that can be changed...

Solved. Brought a new mother board. Use the same Memory as was using in all of the above tests and checks. Worked out of the box. Plugged both of the Memory sticks in the bios saw both sticks 1600 DRR3 2GB each and has not missed a beat since. Thanks for all of teh suggestions

The 1333 1 GB ram was Kingston KVR1333D3N9/1G not brought as a pair. but works fine with both installed in three other computers. I have also tried two 4Gb sticks not brought as a pair but tried in about 4 other computers. KVR16N11S8/4. Again I can get either stick to work in DIMM-A1 slot...

Just tried a couple of 1GB 1333 memory sticks. Same result as before. Either stick works fine in Slot DIMM_A1 but put a stick in both DMM- slots and same as before no go.

The handbook for the ASUS H81M-PLUS mother board shows ram 2 x DIM max 16GB DDRs 1600 / 1333/1066/ MHz. So the MB should run the the 1600 RAM. I will try some 1333 1 GB ram I have. As for the other mother board the ASUS M4A78LT-M LE the Kingston part number for the ram I am using is listed...

The processor in the H81M-Plus mother board is a Inter 1150 pin G3420. What processor is in the M4A7BLT-M LE mother board I can not remember as I have had the board for quite a while now. The BIOS in the H81M-Plus mother board has the XMP disabled. IMC? could not find any reference to...

Done basically all of the above. sorry to say same result in all cases. Power on and nothing with both DIMM slots occupied. Power on with the first slot with memory in and all it fine, except that I only have half the memory I want. What I did notice and I have not been able to duplicate it...

Mother board, memory or ? I was using a Asus Motherboard M4A7BLT-M LE (AMD). It according to the manual can use two memory sticks of 4 GB each. It has two DDR3 slots. I was running a single 2 GB stick in slot DIMM-A1 and everything was working. Any way I decided to upgrade the memory to 4 GB...