Recent content by Henkenator68NL

Here are commands that are available in atiflash.exe: Type atiflash.exe /? A long list is shown (page by page) https://www.dropbox.com/s/alwb1axvfhrkgef/20150525_120101.jpg?dl=0 Pic2: https://www.dropbox.com/s/ph5k4xi527jszna/20150525_120128.jpg?dl=0 Pic3...

Well my compliments on the entire write up!! That is a solid piece of work. I would like to add some remarks : First off the version off atiflash used does matter. So check you have the correct one. In general atiflash.exe might pop up as atiflash=1.47.exe (or similar). Be sure to rename it...

If I am correct you still are on command Rate 2T ???? switch that to 1T and lower the tRAS to 26, that should work without problem! than see the test result once more :-)

You will be suprised to hear... the biggest wins are actually in the 3th timings !! (partially covered by setting the latency boundary) but manually you should key in the auto values. after testing all is oke you can try to lower the Write to Write delay tWWDD and tWWDR, the Read to Write...

Well your friends is a fortune teller I take it... How good a dram sick really is can only by figured out by testing. But the main thing - for dram- is that is not about the sticks. .. it's about those black things on them: called IC's . There are only a few IC manufacturers Like Samsung...

Above is xmp OC ..... First start testing efficiency of XMP settings. . how? Search for the " share your aida64 Memory setting here" thread on tpu 1 download trial of aida64 and run cache memory test. Gives great insight in actual read, write , copy and latency of your dram. 2e use tool like...

Filtering is pretty easy, just use any garden hose filter like this: Connect hose; 1 end to bucket or directly to water tab, other end through pump and all your stuff and out in the sink, some pretty nasty stuff will emerge. Most of the time its either PVC particles or indeed paint (from water...

Best program IMHO, is HWINFO64 it comes in different versions, I always use the latetst beta version = portable version = no need to install, can put it on a usb stick if you want. can be downloaded here: http://www.hwinfo.com/beta/hw64_449_2365.zip run the sensors list and you will see tons...

Is the frontpage / result list still being updated ???

A hot GPU, well that actually doesn't say anything about the exact cause. A GPU has several "hot zones", did you check the specific hardware sensor read outs? You should look for sensor info from for example gpu core, gpu memory, gpu shader, gpu vrm's. I agree with other replies: only...

omg, After reading this I realized that I am consuming tremendous amounts of power. For the last 5 years my annual consumption is very stable... Bit high though, burning 6500 KWh... I actually had people from power company calling to ask about it, since it's twice the amount of an average 4...

After re-reading the remarks from the OP, I cannot help but wondering: Are you sure that you get full control of dedicating the extra dram to any VMware? The influence of all (running in back ground processes which are really prioritised by MS, influencing this behaviour tends to take in...

Maybe a strange question, but why would you add more ram? You already have 16GB installed and that 16GB will hardly ever be all in use. For example here is overview of Memory Usage from 1 of my systems. It has 2 x 4Gb Dominator Platinum 2133 CL9 installed. I use one off the Microsoft Tools from...

well after a little digging I was surprised to find quite a few 5000+ OC's :-) AMD FX-6300: 5310MHz http://valid.canardpc.com/25j5wc Intel Core i7 2700K: 5099MHz http://valid.canardpc.com/k9jkua Intel Core i7 3770K: 5300MHz http://valid.canardpc.com/2899677 Core i7 4770K: 5099MHZ...

Overclocking an 4790K on Z87 or Z97 packs a real nice extra besides the CPU and Cache speed: it Rocks at overclocking DRAM far beyond XMP specs, better than al other systems I have tortured. Running 2400MHz cl9 kit at 2800MHz cl9 is not uncommon (depends on the brand and the IC's). When...