• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by MUff!N

  1. MUff!N

    First Overclock

    This pretty much say is all, but in short you're well within the safe range...that's actually running quite cool. Really with water cooling you can go MUCH HIGHER & still have pretty low temps! I'd push it to at least 3.60GHz! But you should be able to clock the processor a bit higher still...
  2. MUff!N

    First Overclock

    For over all system's temps, fans speeds & voltage monitoring (also controls the fans) Speedfan 4.35 (The 3rd Core temp reading in Speedfan is the 8800GTS GPU temp) For Core Temp monitoring Core Temp 0.99.3
  3. MUff!N

    Q6600 jumping back and forth from 1.6 ghz and 2.4 ghz??

    Most of the time I just sit back and read the results...but it seems he hasn't posted back since...Seems you might have given him too much info. I found through trial and error (and research) that there is no set rules when it comes to overclocking at all!!! Even if it's the exact same setup as...
  4. MUff!N

    ATITool 0.26 Release Discussion

    Mouse gets real Sluggish using version .026 I've been using the ATiTooL .024 for a while now with no problems at all, but when I upgraded to the ATiTooL .026 my mouse (Logitec MX310) started having problems in the game, Namely HL2...Real sluggish and slow to respond...Doesn't matter what the...
  5. MUff!N

    Bad response time with Logitech MX310 mouse

    I've been using the ATiTooL .024 for a while now with no problems at all, but when I upgraded to the ATiTooL .026 my mouse started having problems in the game, Namely HL2...Real sluggish and slow to respond...Doesn't matter what the video settings are or the clock setting either.:wtf: So I went...
  6. MUff!N

    Radeon 9550 to 9600 Bios Mod

    That's kind of a no brainer there...because if you read any of the info here on flashing the bios, it won't work...and will let you know that even if you try and force it to.:banghead:
  7. MUff!N

    Radeon 9550 to 9600 Bios Mod

    This is something I did that's very simple to do for additional cooling of the card without having to put a custom fan mod on the card itself! I took an additional 80mm fan and used LoopLock(Kinda like Velcro but better) self adhesive backing to the bottom of my case (For easy Mounting), and the...
  8. MUff!N

    Windows won't load

    I know this is kind of an obvious question, but have you tested the Harddrive that you're load windows on to see if it's got bad sectors? If the harddrive is bad in anyway then you'll be missing crucial files for windows to opperate.:( I've had Harddrives that were good one day, and bad the...
  9. MUff!N

    Bios Flashing Problem need help!!!

    Looks like you double posted this under different titles...read. http://forums.techpowerup.com/showthread.php?t=16429
  10. MUff!N

    9550

    Yep...that's about it with this card! I tried every 9600 Pro BIOS I could find that was close to the Configuration of my card with the same results as you...I know because that's the exact card I'm using...This is what I did and I'm getting very good results with the overall performance of the...
  11. MUff!N

    Requesting OC assistance/Knowledge

    Yea, the only way of knowing absolutely for sure whether or not you can use CPUFSB is to locate the PLL on your motherboard and see if it's listed as one that works with the program. The PLL chip is what regulates the FSB frequencies. I did do this and the words on the PLL chip are very tiny...
  12. MUff!N

    Requesting OC assistance/Knowledge

    Here's a Bunch of detailed information on over clocking your CPU. ;) If you take the time to read this, you'll find out the "your" peticular Processor has a LOCKED multiplier & overclocking is best done increasing the front side bus...which is exactly what I had to do with mine setup to...
  13. MUff!N

    Requesting OC assistance/Knowledge

    Well, from what I can see of your Case and Cooling (yea I looked around your Photobucket site) I'd say that you can over clocked the CPU because you're using Heatpipe cooling, and you've got very good Case cooling... ;) Scav's Computer Case My question would be is "why" do you want to...
  14. MUff!N

    Radeon 9550 to 9600 Bios Mod

    LOL...Better yet is that I got it as a gift for FREE!!! :rockout:
  15. MUff!N

    Ati 9550 Agp

    Really the only reason I overclock anything is to get the best performance out of what I have and not because it can be...For example: My Pentium 4B-2.4Ghz. As it stands stock it's really slow and old technology.:( That and my mobo only has a 533 FSB (Max!) But when I use CPUFSB to increase...
Top