• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by newbuildnoob

  1. N

    Pc seems to boot fine, but no signal to screen {help}

    Hi guys! Thanks for all your help. It turns out that I was shipped a defective mobo from msi. I replaced it with an asus a55bm-a/usb3 and an amd a4 6300 apu. The other cpu i had was fine, but i decided to go with an apu. Again, thanks for all your help. I really appreciate the support. I will...
  2. N

    Pc seems to boot fine, but no signal to screen {help}

    Yes. I've tried all the ports.
  3. N

    Pc seems to boot fine, but no signal to screen {help}

    Also, For this mobo, what budget apu would you suggest? Would a AMD A6-5400K or AMD A4-5300 suffice?
  4. N

    Pc seems to boot fine, but no signal to screen {help}

    So, do you think it would be a good idea to send back the cpu and order an apu? I don't know if there is any problem with any of the parts, but i tried everything. At this point i'm just frustrated with the build lol. I took out parts from my other pc build which went just fine and putting parts...
  5. N

    Pc seems to boot fine, but no signal to screen {help}

    I'm using an acer ips led HD touchscreen monitor, but i also tried my 3 other tvs..a vizio, sony, and Insignia. I tried all the cables that i had stored away. DVI, HDMI,VGA, DVI/HDMI, VGA/DVI.
  6. N

    Pc seems to boot fine, but no signal to screen {help}

    The 24pin goes in fine and stays locked in. I was just messing around with it before i took the picture. Didn't notice it wasn't locked it in. I checked that also. I made sure to mark all the spots where the standoffs need to go for the mobo to go perfect so it wouldn't short out on the case.
  7. N

    Pc seems to boot fine, but no signal to screen {help}

    I tried it out the case with one stick of ram, cpu and the graphics card. I tried swtiching out the 610 for a 660 and i was still getting no output.
  8. N

    Pc seems to boot fine, but no signal to screen {help}

    I have tried that and there are no bent pins. Its a little blurry, but here is the image.
  9. N

    Pc seems to boot fine, but no signal to screen {help}

    Hi Guys, I have tried all of the above prior to posting a reply again. I called msi support and the walked me through everything. I tried changing psu, clear cmos, swap ram, minimal specs, taking out mobo and testing everything outside chassis along with trying multiple inputs. Everything seems...
  10. N

    Pc seems to boot fine, but no signal to screen {help}

    Yes. I tried both the motherboard and graphics card slots. I tried vga, dvi, hdmi, dvi/hdmi, vga/dvi and nothing worked. I tried my tv, acer monitor, and my two other tvs and still no display. All the components seems to be working fine, even the graphics card fan, but no display.
  11. N

    Pc seems to boot fine, but no signal to screen {help}

    I recieved the graphics card which is a EVGA geforce 610 1gb DDR3 and i installed it fine, but its still not displaying anything out to the screen.
  12. N

    Pc seems to boot fine, but no signal to screen {help}

    I will definitely post pics wen everything is complete.
  13. N

    Pc seems to boot fine, but no signal to screen {help}

    Thanks a lot. I appreciate all the help. I've learned so much. i'll keep you guy updated to see how it goes
  14. N

    Pc seems to boot fine, but no signal to screen {help}

    what is a cheap graphics cards you would suggest that is compatible with the motherboard for under 50 bucks? I just need for regular everyday computer use, no actual gaming. I already have a dedicated pc for gaming.
  15. N

    Pc seems to boot fine, but no signal to screen {help}

    Ah, thanks a lot. I really though i broke something. I am new to this as it is my first build I was not aware that an independent graphics card or an apu would be needed.
Top