Memory !!
OK reread the posts and still say it is memory. Try to reload windows and if it has to re-try to copy serveral different files the you are having read/write issues with the memory. Setting the timings might help but at this point memory sounds bad. Onw other thing to try is to remove...
Parts is Parts
AMD main fab plant is in Germany and I am sure no one is have compatility probs with cpus so I do not see where any other piece of hardware would really matter. I think Sapphire is produced in Europe as well. Long story short if it requires anything special normally the site and...
Starry Nite
I got and idea. Etch the pattern in the plexi and then fill the etched pattern with uv reactive paint. I think that would look really good as well as being just a bit different.
:D Keep on OC'ing
9600XT OC redeaux
OK, I just reloaded and went from Pro to home because suppose to use less resources and all that stuff but my knew oc now is 557:370 and stable so far.
:D Keep on OC'ing
CHeap Mod Parts
I myself like http://bestbargainpc.com/. Not for real mod parts but for the project I am working on I bought 3 of the same cases for 9.99 ea. I like to custom cut so if i mess up on one i have another to keep goin and they have good prices for pc parts as well. I buy from both...
To view this case mod, go here.
Specs:
AMD Athlon XP 3200+
OCZ 1 GIG (2x512) 2.5-3-3-6
MSI K7N2GM2
Nforce NIC
RealTek Audio (built-in)
Aspire 500w Blue Mod
Lite-on SOHW DVD-RW/DL
Sony 1.44 Floppy
Mods:
Custom ThermalTake HS/Fan Combo Volcano 11+ HS StarForce Blue Fan
UV Green...
X800pro Artic Cooler 4
You might wanna double check to make sure cooler not touching anything else but gpu and memory and once again use some good goo that always helps. I used Artic Silver 5 on mine. I have a non vivo pro but with 2.0ns ram and I get 570/574 stable. I have pretty good luck on...
Artic cooler and goo
Artic Silver makes a goo remover so I would pick that up and try to do a clean up with that stuff and then apply the Artic Silver on the goo needing parts and then see what happens. Mine was rpetty easy to install though. My pro is doing above xt pe 570/574 and I am happy...
Use good goo
I have same cooler and I use artic silver 5 goo. It can never hurt but do not blob it on just a thin coat on BOTH sides will do. Then give the ol' 1280x1024 ( insert game here ) test and check temp. Everyone seems to forget about the goo.
:D Keep on OC'ing
XL core slower than PRO
AMDcam was wondering why a PRo seems to be a bit better than an XL PRo 475/450 an XL 400/490 http://www.ati.com/products/radeonx800/radeonx800series/index.html. This is not a good trade of considering the small difference in memory speed and considering the PRO's are...
I know wrong tool Experimenting
Yeah so far so good with HL2 @ 1024x768 and same for DOOM3 ver1.3. frame rates vary but hang aroud 30ish with 4x AA which is kind suprising as this is not a really great AA card ya know.
:D Keep on OC'ing
PS I switch between ATT - ATI Tray
I am using a stock cooler and OCZ memory copper heatsinks on all memory and getting 562:356 which I think is pretty good. I am using ATI Tray Tool with ngohq drivers. Anybody had same or better results and if so how. I am really surprised at the results so far.
System Specs
Aspire 500w blue...
To view this case mod, go here.
Specs:
PC Hardware
Case: Noblesse 308 Small Server
Power Supply: Antec True Control 550
CPU: Athlon XP 2500+ OC'D 3200+ 2200MHz
CPU Heatsink/fan: Thermalrite 7Cu+ / Aerocool TMD 80mm fan
M/B: MSI K7N2D
Mem: Kingston CAS 2.5 3 3 8 Timings...