Recent content by Martin von R

littel updat whit G.skill 4000 cl 17-17-17-37 1.35v at 4300MHZ cl 16-16-16-35 1.5v iv 1.27v sa 1.35v no xmp ,tweak sub timing 24/7 use

10600K@4900 MSI MAG Z490 TOMAHAWK mem 3600MHz cl 17 1.35v 4x8GB @4100cl 20 v 1.38v // IO 1.26v SA 1,27v cheap HyperX Fury RGB 3600MHZ cl17 when I lower cl, my test gets worse, but letting them run auto, all my tests go to the good side do not think about my vcore, it is the cpu...

have tried to set for 50% power limit, but can not see anything on the msi afterburner / ccc but tests tendons on my 7970 1400/1800 can run a tad more now . got blue screen after 10 minutes when I stare a game up,with VBIOS. vgpu was also dropped from 1.3v to 1.273v load I were out on a...

here is the best bios i got Powercoler 940/1100 mod to 3D 1.3v

no pci-e voltage on this modterbord :shadedshu 0 errors in 3Dmark at max oc, it freezes just,inside the test 0 artifacts. only error whit mem, if I go over 1250=artifacts. no artifacts the gpu if I goes over the 1110 all stop/freez :wtf: Old vtt set,can help maybe,they did it whit HD4890...

yes it is yummy some will spend time on us :toast: and so we require just into:rolleyes:

It can be VTT but not in rbetool for HD6870, it was otherwise well with my overclock on my HD4890

I have a XSPC chipset blok on gpu :nutkick: ? whit air is load temp 82/82c max oc 1100/1245 an whit water it is 42/45c but it gives no room for more oc with water on only one doing temp, have tried up to 1.5v, which is something that stops me at 1110 on gpuen but do not know what it is

yes it is a bios set more you ned,look in the link/foto

If you flash to a HD6870 from a 6850 bios look here http://translate.google.com/translate?js=n&prev=_t&hl=da&ie=UTF-8&layout=2&eotf=1&sl=da&tl=en&u=http%3A%2F%2Fwww.octeamdenmark.com%2Fforums%2Fnyheder%2F7040-saa-er-rbetool-1-27-ude-til-hd6xxx-med-voltset.html&act=url

rbe 1.27 NO VTT SET,to HD6870 ? why

Hi all I have test 1.27 on my HD6870 voltset works well, but when I change MHZ 3D load, I can not read Regt win7 in, it stops watching some other bios and found out that they overclcok bios had a bios seen more sorry my english. See my test here...

test bios HD6870 1.45v get it here http://www.octeamdenmark.com/forums/extreme-mods/6743-test-bios-ati-hd6870-1-45v.html report back here plz

I would like to try it;) have test my card with softmod, up to 1.6V, but the bios mod always best :)