Recent content by rcecola

ok i have an ati radeon 9800pro 128mb with a r360 core and 128mb of memory which bios do you recommend. also will winflash work to flash or should i use another program?

if i flash my card with a new bios then flash it back to the original, will ati know the difference and void my warranty?

here is a pretty good article about it. http://www.flexbeta.net/main/articles.php?action=show&id=84

i replaced my stock cooler with a thermaltake silent boost to run at 3200

ratios fr33ze is right try to keep the ratio at 1:1 by overclocking your ram and relax memory timings.

on my board i just set the fsb to 200. i did not need to adjust the voltage to run at 3200. the processor works like a charm. how old is the 2500? the newer ones are locked.

i currently have the agp at 1.6v, i can change the agp voltage to 1.7v but i only have a 350w psu. can the card and psu handle 1.7v without any problems?

the atitool is fine. the 3d view will occupy the alot of the cpu. make sure you close the 3d view before running any application and you should not have any problems.

how much more can i get from the card? what are typical numbers i can expect from overclocking with stock cooling?

My max overclock(stable) on my ati 9800 pro with stock cpu cooling and iceberq ramsinks is 403.31core and 364.5mem at 22c ambient, 38 system, 52 cpu. does anyone have any advice on how to overclock my 9800 to higher levels with stock cooling or is this all that is possible?

does your case have enough airflow? also check the gpu fan to see if its on?