Recent content by shawnizzzle

fsb voltage. You may need a little bit more on the mcp for your ram. Im assuming you got 4 sticks of 2gig. That would require more volts then.

Mcp=southbridge spp=northbridge Alot of people do leave their stuff on auto because it works for them and heres why. Your board including mine will overvolt all the settings on auto once you get away from the stock specs. This is why it works although you really can drop alot of the voltages...

lower them down a hair and then move one up at a time running furmark and see where each one tops out at then that will let you know what you can run when unlinked. It will also let you know which one is holding you back do this also with your ram in some cases i think it becomes a bottleneck...

Yeah i realized at the last minute that you had 9 series gpu's and i was referring to my gtx 260. The shaders if you look up is i beleave the stream processors or sp's. You have 64sp's so if you overclock your core to 720 thats your 1 core. If you get your shaders overclocked higher that is...

First of I go to crazypc.com for alot of my liquid cooling stuff yeah you might be able to get a few dollars of here and there but their located in michigan and so am I so i get their cheapest shipping and it always comes overnight. 2. Dtek fuzion V2 is a really nice water block for the cpu...

I am deffinatly going to get one when they come out. I dont care if this is fake or not they have 2 threads per core. Thats going to give nothing but more performance. And whose of you that are dogging the one who put this thread on her. You can tell he prolly looked hard for information just...

First off use furmark to do all your stability testing http://www.ozone3d.net/benchmarks/fur/ Second. In sli you can only overclock as far as your slowest card. One of your cards might overclock very well and the other not and in sli you can only go as high as your slowest cuase both of your...

Thats what my gf's vid is and hers takes alot of voltage in my system to get to 3.6 i think it was like 1.55v or 1.6v

Its weird they like loosen up or something but mine sure does. The thead that kurash started has alot of good information on these cards but its like 30 paged long it took me a weekend to read it all

Yeah i didnt think so eigther but i forgot who corrected me but yes they were right i wouldnt recommend running it at that temp all the time but it can run at it though

Thanks ntdouglas than Im sure that this will be the one ill get for her. She has the 680i and is iching to overclock it and i wouldnt recommend it on the stock cooler. And your validation is identical to my chip mine is 1.3125 alos

As for the gtx 260 when i got it last week it would only clock to 686 on the core. After running it for a day i got a lil bit more. Then day after day it got more and more i can run it higher than that but it will crash on some games and runs fine on others.

This is a screenshot of my computer at 4ghz so you guys can take a look at voltages and temps

does yours run over 71 degrees without shutting down? I just looked it up and you are right it is 90C sorry guys

Oh im sorry i thought i read it was 71C. As soon as my system hits 71 it will shut down IT might be 95 thanks for letting me know