• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Recent content by skandal

  1. S

    X1950GT too lame?

    Yes i have a Pci-e GT from Palit, already posted my original bios in your X1950pro bios thread.
  2. S

    X1950GT too lame?

    I have the GT, but i can't OC it properly.... with AtiTool and ATT....... only with winclock.
  3. S

    X1950GT too lame?

    Is W1zzard planing on suporting the Rv570 better? i can't even overclock my card decently with 0.27b1.
  4. S

    Get your X1950Pro modded BIOS here

    Ket, i will probably use your mod bios for testing i just wanted this one to check the fan speed :P
  5. S

    Get your X1950Pro modded BIOS here

    GT's r not XT and XTX rejected, they have the same core as the pro, exact same, and neither the pro is rejected XT or XTX, they r a new core with 12 pipes and 36 pixel pipes based on the XT core but manufactured at 80nm instead of the 90nm of the XT version. Some say that the GT version is...
  6. S

    Get your X1950Pro modded BIOS here

    If the manufacter is XpertVision/Palit the pro and GT r the same card.
  7. S

    Get your X1950Pro modded BIOS here

    Ket bios will do no good for me.... he has samsung memory, i have hynix.......
  8. S

    Get your X1950Pro modded BIOS here

    I'm having a odd problem: i can get stable with the clocks :573/708, then i raise the core a bit up and i get artifacts...... ok normal here pushing the core too much...... but when i set the clocks to 588/695 i pass artifact testing without problems for more then 10 min....... so whats wrong...
  9. S

    Get your X1950Pro modded BIOS here

    He only needs a mobo with both conroe and AGP suport....
  10. S

    Get your X1950Pro modded BIOS here

    Ket, as promissed here is my bios..... i'm doing a bit of research my self, mu memory is hynix, 1.2, 1.4 or 1.6, i don't know wich one cuz the last 2 digits were remarked... but i think my memory is being undervolted, since the spec says 2.0V and probably i'm getting 1.8.... when o get my...
  11. S

    Get your X1950Pro modded BIOS here

    i ment how......... i have the same card and none of the tools work....
  12. S

    Get your X1950Pro modded BIOS here

    how did you get the GT bios?
  13. S

    Get your X1950Pro modded BIOS here

    I couldn't upload my bios.... none of the tools detected my graphic card. The pro bios shouldo work perfectly in the GT.
  14. S

    Get your X1950Pro modded BIOS here

    Use atiflash, altough it didn't worked with my X1950GT it should work with the pro.
  15. S

    Get your X1950Pro modded BIOS here

    No luck, 3.25 kept saying no adapter found :/
Top