Recent content by Thaiman

This is the "right" command gvf11 -p -f r80x256v.f1

Sorry,, try this link http://www.techpowerup.com/softmod/faq.php You can not turn a 9600 into anything, it will always be a 9600

Because: 1: Sometimes u can get a performance-boost 2: Sometimes u can hardmod and change the bios too, and turn it into a better model 3: Sometimes ...... bla bla bla Tjeck theese link, this is a reason why...

Dont try to flash it, if you get this message "This BIOS is not compatible with this card" <------ And you do !! - So my advice, dont do it - you just get in problems with your card !!

As I can see, you can get your bios here http://www.techpowerup.com/bios/ You need a bootdisk (Feks. Dos.622), Then you set your bios(mainboardbios) to boot on floppy first ! Then you start your computer with the bootdisk - you must wait a little bit, but after a little while, you should...

Sorry, You have tried that (I was a little to fast) 1: U need a bootdiskette, that you trust 100 percent, you have to be sure (if you can NOT see anything on your monitor/tv) - that the disk works, and end up with prompth [ A:\> ] 2: Use the bios you already have "from this site" - I...

You can find your bios here ? ? If the link dos'nt work, then look for "Hercules 9800 SE AIW 128 MB" http://www.techpowerup.com/bios/biosdetails.php?b=Hercules.9800SEAIW.128.Samsung33.bin http://www.techpowerup.com/bios/ Good luck, its not so bad - your card isnt broken, u just need...

Backspave, - Here's some commands you can try to bring your card back to life again 1: I guess that you are following the way I did it - Your mashine is dead as long as you have your x800 in it - But if you do as I did you should have a chance 2: I guess that you sometimes have a "lucky"...

Thx NRP, - That was really a "nightmare" - Now I understand that "other people around the world" have the same problems using the flashrom (GVF12) and bios (RX80T8V.F2) from gigabyte - I have several mails now in my mailbox - all the same, people "CAN NOT" boot from floppy (HD,CDrom a.s.o) after...

Ohhh ,, NRP already been there with this link, sorry for that. But good luck anyway Labbetuss

Maybe this Link can help you http://www.vr-zone.com/?i=817&s=1

I have a x800pro, - but now i would choose a "GF6800GT" - thats is "moust" for the money, but its difficult to choose - and its hard to say what is the bedst buy now

Thx to all, who interested for this problem, and tried to help me out - Now I did it myself - but I feel happy about this forum - and a specially thx to "15th Warlock" for beeing very seriosly

Sorry for all my replies, ? ? ? But I have to learn about this site/forum-options

Something important The "very Happy man" I must do something clear for all - When I start my computer, I have a PCI-graphiccard in a pci slot - and my monitor connected to that ! (I use the first pci-slot for this option) - AND, as I told before the "motherboard bios" is set to boot...