What are you think about this settings?
CPU Speed:4638Mhz(50% Overclock)
Ram Speed:2005Mhz (rated ram speed+timings)
CPU Multipler:21.5
CPU Manual Voltage:1.425000
Bus/Peg Frequency-215(8% Overclock)
NB Voltage-1.40
At now i use them, and get stabilty at the moment.What think about...
I want to ask about FSB overclock i want to take 250 fsb speed with my Crosshair v formula MB.But don`t know what voltage required for that fsb speed and witch voltage to use.I want make processor on 4600mhz and memory on 2000mhz with that fsb speed and slow down the multipler?I w8 for...
Is a problem to use memory at 1866mhz with SPD timings 9-9-9-24 or to use it with tested timings 10-10-10-27.Can cause a problem the SPD timings 9-9-9-24 at 1866mhz ?
About the memory.It`s rated for 2000mhz 10-10-10-27 timings it`s Corsair Vengeance.
In bios menu shows from to 1866 to 2133mhz but 2000 it`s doesen`t shown.I can start memory at 2133 with this timings but don`t now if is some problem to start it at this speed.The ram is rated for 2000mhz.Or to...
So, my question is?
I overclock my processor to 4530Mhz and ram to 2005mhz.
My settings:
CPU multipler:21
Bus Speed:215
CPU voltage:1.425000
The ram is Corsair Vengeance 2000mhz timings 10-10-10-27.
I start the ram at this settings to 2000mhz without changing timings only overclocking the...
I write at one hardware forum,one guy use OCCT to look for voltage required with 6970 stock and my configuration.It`s take 450 460W power consumption my PSU is 500W.He told`s my that,when i take voltage at stock hd 6970 at 1.175 i have overdrive 12V and PSU restart.For that reason he told`s my...
about voltage it`s happening something strange.At 880/1375 1.175 voltage at some benchmarks i have issues and pc restart.But the strange is when i`m run at 880/1375 1.100 voltage stock HD 6950 i don`t have crashes restarted pc or some issues i run too much benchmarks furmark 3d mark.Why is that...
I want to ask something i unlocked only shaders my bios is original stock.I set core880/1375 memory at 1.175 but when run Furmark at Burn it the PC reset alone.After that i change the voltage at 1.100 stock hd 6950 and run the test again 10 times no crashes or reset.Someone to tell my what...
I use Trixx 3.0.7v i set voltage at 1.175 but automaticly the program slowed by "1" and stays at 1.174 it`s that a kind a problem or it`s nothing?
p.s
I change the memory at stock 1250 for now at idle i stay at 40C and 24% Fan.
And what is your suggestions about PowerColor Extreme 1000W i...
I fixed the memory on 1300.What to do to take memory on stock 1250 or 1300 what is the most safest i don`t want to crap the card.And another question about the PSU 500W is little for that card what wattage PSU to choose in time?
Here the link with corrected memory at 1300...