Uptime73
New Member
- Joined
- Feb 5, 2005
- Messages
- 109 (0.02/day)
- Location
- Columbus, Ohio USA
| System Name | custom built clone |
|---|---|
| Processor | AMD Phenom 9950 Quad Core (Agena) |
| Motherboard | ASUS M3A78-EM |
| Cooling | Zalman CNPS9700 LED |
| Memory | OCZ Fatal1ty PC2 8500 4 GB (2 x 2GB) |
| Video Card(s) | Visiotek ATI Radeon 3650 |
| Storage | Western Digital 320 GB SATA II hard drive |
| Display(s) | Proview CRT |
| Audio Device(s) | onboard |
| Power Supply | 475 watt not sure of brand |
| Software | Vista Ultimate Edition x64, Service Pack 2 |
Hello all. I'm getting a BSOD during install of Vista and XP. With Vista, I'm getting
STOP: 0X0000007F (0X0000000F, 0X00000000, 0X00000000, 0X00000000)
For the most part, I'm getting it at the same spot during install, and that's right after I punch in the product key. I do use a Promise Ultra 133 TX2 controller card that the 2 hard drives are connected to. Not sure if that is relevant or not, because I connected the hard drives dorectly to the onboard ide controller and still have the same problem. I have swapped out memory, video cards, removed pci cards, even done a test on memory with mem test and it came out clean but to all of no avail.
The error I'm getting during the XP Pro install is
MACHINE_CHECK_EXCEPTION
STOP: 0X0000009C (0X00000000, 0X8054DA70, 0X000000FF, 0X20040189)
That error pops up during randon points during the install. Also, the hardware has been wapped out and tested as I mentioned above. Any help will be greatly aprreciated. Thank you very much.
- Josh
STOP: 0X0000007F (0X0000000F, 0X00000000, 0X00000000, 0X00000000)
For the most part, I'm getting it at the same spot during install, and that's right after I punch in the product key. I do use a Promise Ultra 133 TX2 controller card that the 2 hard drives are connected to. Not sure if that is relevant or not, because I connected the hard drives dorectly to the onboard ide controller and still have the same problem. I have swapped out memory, video cards, removed pci cards, even done a test on memory with mem test and it came out clean but to all of no avail.
The error I'm getting during the XP Pro install is
MACHINE_CHECK_EXCEPTION
STOP: 0X0000009C (0X00000000, 0X8054DA70, 0X000000FF, 0X20040189)
That error pops up during randon points during the install. Also, the hardware has been wapped out and tested as I mentioned above. Any help will be greatly aprreciated. Thank you very much.
- Josh
