frankenchrist
New Member
- Joined
- Apr 14, 2007
- Messages
- 249 (0.04/day)
- Location
- Washington
System Name | FrankenSLI |
---|---|
Processor | QX6850 3800-4000 mhz X4 Lapped to Perfection (see benchies) |
Motherboard | XFX 780I TRI SLI Board |
Cooling | 2x Black Ice Ex. Rads, Heatkiller 2.0 Laing Pump, NB Cooler |
Memory | 4 GB Mushkin 1066 5-5-5-15 |
Video Card(s) | 2 x MSI GTX 460 OC. |
Storage | WD SATA 500GB |
Display(s) | Samsung Syncmaster 22.5 |
Case | Thermaltake Armor |
Audio Device(s) | Creative |
Power Supply | Antec truepower 1000W |
Software | Windows 7 |
Benchmark Scores | http://valid.canardpc.com/show_oc.php?id=481203 Sadly this beast would go sooo much further with |
So I got this old drinking fountain with a refrigeration unit on top. I tore it down to the compressor and coils and am getting insane temps with it. *testing on a old pent 4@2.5 gig.
I have one of the largest pelts available lying around and have always heard that the colder you can get the hot side the colder the cold side gets... (I get frost from the air on normal liquid cooling with this) Before I blow this sucka up experimenting... The question is will it get even colder running chilled water across the top? I am having problems with the water freezing in the coils on the chiller so will have to go to antifreeze since I disabled the temp sensor on the vapor unit... The pelt already froze the moisture in the air on mere liquid cooling... Also some insulation advice from some experienced sub zero OCers would help.
With this unit I can deliver freezing temps 24/7 so I will need mass insulation. I am a newb at sub zero. Also will my pump handle the cold?...
I have one of the largest pelts available lying around and have always heard that the colder you can get the hot side the colder the cold side gets... (I get frost from the air on normal liquid cooling with this) Before I blow this sucka up experimenting... The question is will it get even colder running chilled water across the top? I am having problems with the water freezing in the coils on the chiller so will have to go to antifreeze since I disabled the temp sensor on the vapor unit... The pelt already froze the moisture in the air on mere liquid cooling... Also some insulation advice from some experienced sub zero OCers would help.
With this unit I can deliver freezing temps 24/7 so I will need mass insulation. I am a newb at sub zero. Also will my pump handle the cold?...