• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

NVIDIA Designs New GTX 260 PCB, Further Reduces Manufacturing Costs

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
The introduction of the new G200b series graphics processors sought to revive NVIDIA's stronghold over the high-end graphics market, by reducing manufacturing costs, and facilitating high-end graphics cards at unusually low price-points, to compete with rival ATI. The first SKU using the G200b GPU was the new GeForce GTX 260. The PCB of design of the new model (P654) saw several drastic changes, that also ended up contributing to the cost-cutting: all memory chips were placed in the business end of the PCB, and the VRM area rearranged. News emerging from Expreview suggests that NVIDIA has worked out an even newer PCB reference design (model: P897) that aims mainly to cut production costs further. The reference design graphics board based on the PCB will be given the internal name "D10U-20". A short list of changes is as follows:
  • The number of PCB layers has been reduced from 10 to 8, perhaps to compress or remove blank, redundant or rudimentary connections
  • A 4+2 phase NVVDD power design using the ADP4100 voltage regulator IC, the FBVDDQ circuit has been reduced from 2 phases to 1, and the MOSFET package has been changed from LFPAK to DPAK grouping, to reduce costs. The ADP4100 lacks the I2C interface, which means voltage control will be much more difficult than on current PCBs of the GeForce 260,280, 285 and 295
  • The optional G200b support-brace has been removed
  • While the length of the PCB remains the same, the height has been reduced to cut costs
  • BIOS EEPROM capacity reduced from 1 Mbit (128 KB) to 512 Kb (64 KB)
  • Cheaper DVI connectors

The new PCB is expected to reduce costs by as much as US $15 which will impact on the overall product cost, and help step up the competitiveness. Expreview notes that the new PCB will be available to the partners by the third week of this month. Below are the drawing and picture of the PCB. For reference, the second picture is that of the older P654 design.



View at TechPowerUp Main Site
 
Last edited:

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
So current gen GT200 PCB's are better then?

- Voltage Control
- Better DVI ports
- Bigger EEPROM

And do you mean width of the PCB is 1.5cm less? Got me confused for a sec cus I was thinking, "But the PCB is only about 5mm thick! :confused: ", lol.
 
Joined
Jun 3, 2008
Messages
231 (0.04/day)
System Name Uh, my build?
Processor Intel Core i7 3770k 3.5GHz (3.9GHz turbo)
Motherboard Gigabyte Z77X-UD5H (F8 BIOS)
Cooling Coolermaster Hyper 212 Evo
Memory G.Skill 8GB DDR3 1600MHz CL9
Video Card(s) Gigabyte Radeon HD7970 3GB 1GHz Core/5.5GHz Memory
Storage SanDisk Extreme Pro 960GB & 2TB WD Black & 1TB WD Green
Display(s) 1x Samsung 23" Syncmaster P2350 1x LG 23"
Case Coolermaster HAF X
Audio Device(s) Onboard now since store didn't RMA properly
Power Supply Corsair HX 850W
Software Win 10 Pro 64bit
Benchmark Scores 3DMark 11 - P8456 - http://3dmark.com/3dm11/3372758
It appears they are skimping out on PCB manufacturing which is not good.
 

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
So current gen GT200 PCB's are better then?

- Voltage Control
- Better DVI ports
- Bigger EEPROM

And do you mean width of the PCB is 1.5cm less? Got me confused for a sec cus I was thinking, "But the PCB is only about 5mm thick! :confused: ", lol.
Yes, software voltage control could get difficult as the VRM IC doesn't support the standard interface in which voltage is controlled by software. DVI ports really wouldn't make a noticeable change the older ones had EMI shielding. We doubt if the G200b made use of the extra 64 KB of EEPROM space on the older PCB. Your BIOS .rom file for the GTX260 always weighed 64KB. The "height" as in:



Look at the red line. That dimension for a PCB is called its height. For example, "half-height" cards are HTPC or Slim form-factor friendly.
 
Joined
Feb 9, 2007
Messages
696 (0.11/day)
Location
Portugal
System Name Quiet Gaming PC v5
Processor AMD Ryzen 5 5600
Motherboard Gigabyte B550 Aorus Elite V2 (rev. 1.2)
Cooling Thermalright TRUE Rev. C
Memory 2x16GB TeamGroup Vulcan Z Red DDR4-3600 CL18
Video Card(s) XFX Speedster SWFT 309 RX 6700 XT
Storage WD Blue SN550 1TB NVMe // TeamGroup MP34 4TB NVMe // Crucial MX100 512GB
Display(s) MSI G27CQ4 E2
Case Fractal Design Define R4
Audio Device(s) Realtek ALC1200
Power Supply Corsair RM850x
Mouse Logitech G502 Hero
Keyboard MKPlus Slayer M3 RGB Mechanical Keyboard
Software Windows 11 Pro
And do you mean width of the PCB is 1.5cm less? Got me confused for a sec cus I was thinking, "But the PCB is only about 5mm thick! :confused: ", lol.

Height.
 
Joined
Oct 1, 2006
Messages
4,883 (0.76/day)
Location
Hong Kong
Processor Core i7-12700k
Motherboard Z690 Aero G D4
Cooling Custom loop water, 3x 420 Rad
Video Card(s) RX 7900 XTX Phantom Gaming
Storage Plextor M10P 2TB
Display(s) InnoCN 27M2V
Case Thermaltake Level 20 XT
Audio Device(s) Soundblaster AE-5 Plus
Power Supply FSP Aurum PT 1200W
Software Windows 11 Pro 64-bit
So current gen GT200 PCB's are better then?

- Voltage Control
- Better DVI ports
- Bigger EEPROM

And do you mean width of the PCB is 1.5cm less? Got me confused for a sec cus I was thinking, "But the PCB is only about 5mm thick! :confused: ", lol.
Its call the Height as the card is always perpendicular to the motherboard.
 
Joined
Feb 9, 2007
Messages
696 (0.11/day)
Location
Portugal
System Name Quiet Gaming PC v5
Processor AMD Ryzen 5 5600
Motherboard Gigabyte B550 Aorus Elite V2 (rev. 1.2)
Cooling Thermalright TRUE Rev. C
Memory 2x16GB TeamGroup Vulcan Z Red DDR4-3600 CL18
Video Card(s) XFX Speedster SWFT 309 RX 6700 XT
Storage WD Blue SN550 1TB NVMe // TeamGroup MP34 4TB NVMe // Crucial MX100 512GB
Display(s) MSI G27CQ4 E2
Case Fractal Design Define R4
Audio Device(s) Realtek ALC1200
Power Supply Corsair RM850x
Mouse Logitech G502 Hero
Keyboard MKPlus Slayer M3 RGB Mechanical Keyboard
Software Windows 11 Pro

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
Joined
Feb 21, 2008
Messages
4,985 (0.85/day)
Location
Greensboro, NC, USA
System Name Cosmos F1000
Processor i9-9900k
Motherboard Gigabyte Z370XP SLI, BIOS 15a
Cooling Corsair H100i, Panaflo's on case
Memory XPG GAMMIX D30 2x16GB DDR4 3200 CL16
Video Card(s) EVGA RTX 2080 ti
Storage 1TB 960 Pro, 2TB Samsung 850 Pro, 4TB WD Hard Drive
Display(s) ASUS ROG SWIFT PG278Q 27"
Case CM Cosmos 1000
Audio Device(s) logitech 5.1 system (midrange quality)
Power Supply CORSAIR HXi HX1000i 1000watt
Mouse G400s Logitech
Keyboard K65 RGB Corsair Tenkeyless Cherry Red MX
Software Win10 Pro, Win7 x64 Professional
Good news post and thanks for explaining it too.
 

EarlZ

New Member
Joined
Jan 10, 2006
Messages
339 (0.05/day)
Processor Intel Core i7 2600K @ 4.8Ghz
Motherboard Gigabyte P67A-UD4-B3 Rev1.1
Cooling Noctua D14
Memory 4GB G.Skill 9-10-9-27-1T 2133Mhz
Video Card(s) GTX580 1.5Gb
Storage 2x Samsung Spinpoint F3 1TB
Display(s) Samsung T220
Case Lian Li PC-P80
Audio Device(s) X-Fi Extreme Music
Power Supply Silverstone Strider Gold 850
Software Windows 7 Ultimate x64
Which means we will get a lesser durable and lesser overclocking card, kudos to nvidia then.
 

Tatty_Two

Gone Fishing
Joined
Jan 18, 2006
Messages
25,793 (3.88/day)
Location
Worcestershire, UK
Processor Rocket Lake Core i5 11600K @ 5 Ghz with PL tweaks
Motherboard MSI MAG Z490 TOMAHAWK
Cooling Thermalright Peerless Assassin 120SE + 4 Phanteks 140mm case fans
Memory 32GB (4 x 8GB SR) Patriot Viper Steel 4133Mhz DDR4 @ 3600Mhz CL14@1.45v Gear 1
Video Card(s) Asus Dual RTX 4070 OC
Storage WD Blue SN550 1TB M.2 NVME//Crucial MX500 500GB SSD (OS)
Display(s) AOC Q2781PQ 27 inch Ultra Slim 2560 x 1440 IPS
Case Phanteks Enthoo Pro M Windowed - Gunmetal
Audio Device(s) Onboard Realtek ALC1200/SPDIF to Sony AVR @ 5.1
Power Supply Seasonic CORE GM650w Gold Semi modular
Mouse Coolermaster Storm Octane wired
Keyboard Element Gaming Carbon Mk2 Tournament Mech
Software Win 10 Home x64
Joined
Feb 21, 2008
Messages
4,985 (0.85/day)
Location
Greensboro, NC, USA
System Name Cosmos F1000
Processor i9-9900k
Motherboard Gigabyte Z370XP SLI, BIOS 15a
Cooling Corsair H100i, Panaflo's on case
Memory XPG GAMMIX D30 2x16GB DDR4 3200 CL16
Video Card(s) EVGA RTX 2080 ti
Storage 1TB 960 Pro, 2TB Samsung 850 Pro, 4TB WD Hard Drive
Display(s) ASUS ROG SWIFT PG278Q 27"
Case CM Cosmos 1000
Audio Device(s) logitech 5.1 system (midrange quality)
Power Supply CORSAIR HXi HX1000i 1000watt
Mouse G400s Logitech
Keyboard K65 RGB Corsair Tenkeyless Cherry Red MX
Software Win10 Pro, Win7 x64 Professional
Which means we will get a lesser durable and lesser overclocking card, kudos to nvidia then.

The only people it will hold back will be the ones trying to use software voltmod techniques. The people serious about volt modding already use the hardware method instead.

I guess some people see all news as bad news. It shouldn't make any difference except lower costs to the manufacturer and customer. Sounds like an upside.
 

Jarman

New Member
Joined
Jan 28, 2007
Messages
387 (0.06/day)
Location
Wrexham UK
Processor Opty 165 @ 3011 MHz
Motherboard DFI NF4 SLI-D
Cooling Koolance Exos, DD TDX/Maze4 GPU
Memory 2GB G.Skill HZ DDR 500 Kit
Video Card(s) XFX Geforce 7900GT
Storage > 1.5 TB
Display(s) XEROX 19" TFT
Case Coolermaster ATCS 101
Audio Device(s) Creative X-FI
Power Supply OCZ 850W
Software XP serv pack 2
sod up full cover waterblocks too id imagine?
 

EarlZ

New Member
Joined
Jan 10, 2006
Messages
339 (0.05/day)
Processor Intel Core i7 2600K @ 4.8Ghz
Motherboard Gigabyte P67A-UD4-B3 Rev1.1
Cooling Noctua D14
Memory 4GB G.Skill 9-10-9-27-1T 2133Mhz
Video Card(s) GTX580 1.5Gb
Storage 2x Samsung Spinpoint F3 1TB
Display(s) Samsung T220
Case Lian Li PC-P80
Audio Device(s) X-Fi Extreme Music
Power Supply Silverstone Strider Gold 850
Software Windows 7 Ultimate x64
The only people it will hold back will be the ones trying to use software voltmod techniques. The people serious about volt modding already use the hardware method instead.

I guess some people see all news as bad news. It shouldn't make any difference except lower costs to the manufacturer and customer. Sounds like an upside.

Maybe, but i cant see how reducing the PCB layers and VR's would not somewhat reduce the overclocking capabilities and durability.. also "cheaper" DVI connectors.. image quality degradation perhaps?
 

btarunr

Editor & Senior Moderator
Staff member
Joined
Oct 9, 2007
Messages
46,277 (7.69/day)
Location
Hyderabad, India
System Name RBMK-1000
Processor AMD Ryzen 7 5700G
Motherboard ASUS ROG Strix B450-E Gaming
Cooling DeepCool Gammax L240 V2
Memory 2x 8GB G.Skill Sniper X
Video Card(s) Palit GeForce RTX 2080 SUPER GameRock
Storage Western Digital Black NVMe 512GB
Display(s) BenQ 1440p 60 Hz 27-inch
Case Corsair Carbide 100R
Audio Device(s) ASUS SupremeFX S1220A
Power Supply Cooler Master MWE Gold 650W
Mouse ASUS ROG Strix Impact
Keyboard Gamdias Hermes E2
Software Windows 11 Pro
also "cheaper" DVI connectors.. image quality degradation perhaps?

No. All a DVI connector does is connect the card to the monitor. It's just a piece of plastic with a few sockets and metal conveying the signal. All that's different between the new one and the old, is that the old one used an EMI shield. Evidently NVIDIA found that unnecessary. Image quality is care of the NVIO2 processor. That's what handles display, and the fact that it's isolated from the GPU (and its power-hungry components) shows they've already lopped EMI, or any form of interference, although the intention of separating display logic was because the GPU die had become too big.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.61/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
only thing i see people really complaining about is the eeprom size being shrunk, perhaps can have larger wired in.
 
Joined
Jul 19, 2008
Messages
1,180 (0.21/day)
Location
Australia
Processor Intel i7 4790K
Motherboard Asus Z97 Deluxe
Cooling Thermalright Ultra Extreme 120
Memory Corsair Dominator 1866Mhz 4X4GB
Video Card(s) Asus R290X
Storage Samsung 850 Pro SSD 256GB/Samsung 840 Evo SSD 1TB
Display(s) Samsung S23A950D
Case Corsair 850D
Audio Device(s) Onboard Realtek
Power Supply Corsair AX850
Mouse Logitech G502
Keyboard Logitech G710+
Software Windows 10 x64
I dont like it. Sounds like poorer quality all round. $15 saving on a $300-$400 card doesnt sound like its worth it.
 

DrPepper

The Doctor is in the house
Joined
Jan 16, 2008
Messages
7,482 (1.26/day)
Location
Scotland (It rains alot)
System Name Rusky
Processor Intel Core i7 D0 3.8Ghz
Motherboard Asus P6T
Cooling Thermaltake Dark Knight
Memory 12GB Patriot Viper's 1866mhz 9-9-9-24
Video Card(s) GTX470 1280MB
Storage OCZ Summit 60GB + Samsung 1TB + Samsung 2TB
Display(s) Sharp Aquos L32X20E 1920 x 1080
Case Silverstone Raven RV01
Power Supply Corsair 650 Watt
Software Windows 7 x64
Benchmark Scores 3DMark06 - 18064 http://img.techpowerup.org/090720/Capture002.jpg
I dont like it. Sounds like poorer quality all round. $15 saving on a $300-$400 card doesnt sound like its worth it.

I don't think they will pass the savings on to the consumer, this is probably so they can make more money.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.61/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
more yields= more money to them.
 
Joined
Aug 9, 2006
Messages
1,065 (0.17/day)
System Name [Primary Workstation]
Processor Intel Core i7-920 Bloomfield @ 3.8GHz/4.55GHz [24-7/Bench]
Motherboard EVGA X58 E758-A1 [Tweaked right!]
Cooling Cooler Master V8 [stock fan + two 133CFM ULTRA KAZE fans]
Memory 12GB [Kingston HyperX]
Video Card(s) constantly upgrading/downgrading [prefer nVidia]
Storage constantly upgrading/downgrading [prefer Hitachi/Samsung]
Display(s) Triple LCD [40 inch primary + 32 & 28 inch auxiliary displays]
Case Cooler Master Cosmos 1000 [Mesh Mod, CFM Overload]
Audio Device(s) ASUS Xonar D1 + onboard Realtek ALC889A [Logitech Z-5300 Spk., Niko 650-HP 5.1 Hp., X-Bass Hp.]
Power Supply Corsair TX950W [aka Reactor]
Software This and that... [All software 100% legit and paid for, 0% pirated]
Benchmark Scores Ridiculously good scores!!!
With the global economy in such a bad shape this was to be expected. In fact they have already reduced costs with their 55nm lineup. The coolers on their 55nm lineup have been cut down. When compared to the coolers on the original 65nm GTX 260/280 lineup, the new coolers are lighter, have no back cover, heatpipes are shorter and smaller and many benchmarks reveal that in many situations 55nm parts actually run hotter than 65nm parts. Cutting down on the actual circuitry was the next logical step. They are taking the route AMD took a year ago. Hence the massive jump in Radeon 3xxx RMA's when compared to the previous generation, something that also carried on with the Radeon 4xxx lineup. In the following months you can expect a heathy increase in threads with titles such as "OMG! My brand new GTX 260 is DEAD after 2 days" or "My brand new nvidia GPU is artifacting at stock clocks!". Just watch.

Nehalem from Intel and 65nm GTX GPU's from nVidia are truly the last quality products we will see from both manufacturers since due to the worsening global economic conditions they will be cutting down on quality assurance along with everybody else in the industry. Here is an easy prediction: next massive GPU release from nVidia (384SP monster) gets pushed back by at least 6 months.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
If it makes the card cheaper to produce, and allows the manufacturers to reduce the prices on the cards to be more competitive, this can only be seen as a good thing in the consumer's eyes.

Most consumers don't overclock the cards, and even fewer volt-mod them. So the reductions won't affect the majority of people buying the cards. And the ones that would be affected by the changes will just buy one of the more expensive versions that use the old PCB, as I'm sure both will exist side by side on the market.
 
Joined
Nov 22, 2008
Messages
3,779 (0.67/day)
Location
Latin America, Uruguay
System Name The Lizard v2.4
Processor Intel Celeron G1840 (for the time being
Motherboard Gigabyte GA-H81-S2PH
Cooling Intel Stock Fan
Memory 16GB Kingston HyperX 1600
Video Card(s) MSI Gaming GTX 750Ti (For the time being)
Storage 500GB Samsung F1, 160GB Maxtor "Older than god"
Display(s) AOC 28' LCD
Case Coolermaster N200
Audio Device(s) Onboard
Power Supply Antec VP500P
Software Windows 7 Ultimate x64
Benchmark Scores No crashes in the last 24 minutes.
imo this has it pros and con

pros: cheaper good nvidia cards.
cons: bad overclock, the pre-overclocked cards will have a higher DOA rate, not as durable as the first gen.

Conclusion: as long as u dont overclock, this is good, if u overclock, this is bad
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
imo this has it pros and con

pros: cheaper good nvidia cards.
cons: bad overclock, the pre-overclocked cards will have a higher DOA rate, not as durable as the first gen.

Conclusion: as long as u dont overclock, this is good, if u overclock, this is bad

Overclocking shouldn't affect durability with these changes, in fact these changes shouldn't affect durability at all unless more voltage is being run through the card(ie Volt-mods).
 
Joined
Nov 13, 2007
Messages
10,209 (1.71/day)
Location
Austin Texas
Processor 13700KF Undervolted @ 5.6/ 5.5, 4.8Ghz Ring 200W PL1
Motherboard MSI 690-I PRO
Cooling Thermalright Peerless Assassin 120 w/ Arctic P12 Fans
Memory 48 GB DDR5 7600 MHZ CL36
Video Card(s) RTX 4090 FE
Storage 2x 2TB WDC SN850, 1TB Samsung 960 prr
Display(s) Alienware 32" 4k 240hz OLED
Case SLIGER S620
Audio Device(s) Yes
Power Supply Corsair SF750
Mouse Xlite V2
Keyboard RoyalAxe
Software Windows 11
Benchmark Scores They're pretty good, nothing crazy.
Overclocking shouldn't affect durability with these changes, in fact these changes shouldn't affect durability at all unless more voltage is being run through the card(ie Volt-mods).

+1

This is nothing but good news. The cost saving will have minimal, if any impact on the performance of the card; they are just becomeing more skilled with the manufacture of these cards and eliminating unnecessary waste.
 
Top