jmbrettler
New Member
- Joined
- Jun 2, 2009
- Messages
- 29 (0.01/day)
System Name | First Build |
---|---|
Processor | 7750 BE @ 3.1GHZ w/Arctic Pro Freezer 64 |
Motherboard | XFX Nforce 750a SLI |
Cooling | 6 case fans, |
Memory | 4G OCZ Fatality DDR2 |
Video Card(s) | BFG 9800 GT OC SLI (X2) |
Storage | 1TB 7200 rpm |
Display(s) | Dual Monitors... 24" BenQ 2412HD/ SCEPTRE 20" HD |
Case | NZXT AIRFLOW KING |
Power Supply | ULTRA 650watt |
Benchmark Scores | 3dmark06 - 11550 |
Hey all!! Im very excited to be here =)
Here's what I have bought and put together so far:
NZXT Tempest Air Flow King Case
XFX Nforce 750a SLI Motherboard
AMD x2 7550 2.7GHZ w/ Unlocked Multiplyer w/stock heatsink fan
4 GB OCZ Reaper Dual Channel 1066 MHZ
1 TB Seagate 7200 Rpm
SONY DVD+RW/CD+RW drive
65 IN 1 USB Internal Card Reader/Writer
ULTRA LSP 650 WATTPSU
Total Cost thus far: $750cnd and one pissed off girlfriend...
Pissed off not so much at the expense but more-so her inevitable replacement...
Well I managed to screw everything into place and figure out where all the wires connect to! (Believe me, its a big deal for me )
I want this case to be a project for all of us to learn from.
My homework is to learn how to overclock via the internet, over the next couple days. I was hoping to OC' this chip from 2.7 to 3.0Ghz to start and with a new CPU fan in the near future, 3.4 Ghz and beyond...
ANYWAYS I fired up the Mobo and it went right into bios when I hit DLT.
CPU temp is around 50 C
SYS temp is around 22 C
All comments and suggestions are welcome! I can't wait to get an OS and get this show on the road!!
- JB
I also am waiting to figure out which OS I will be using 32bit or 64bit ect...
Any and all suggestions welcome at this point.
P.s I am already thinking about a solution for all these fans I have!! Some sort of fan speed controller for rpm.
How does one go about measuring the case temperature?
Here's what I have bought and put together so far:
NZXT Tempest Air Flow King Case
XFX Nforce 750a SLI Motherboard
AMD x2 7550 2.7GHZ w/ Unlocked Multiplyer w/stock heatsink fan
4 GB OCZ Reaper Dual Channel 1066 MHZ
1 TB Seagate 7200 Rpm
SONY DVD+RW/CD+RW drive
65 IN 1 USB Internal Card Reader/Writer
ULTRA LSP 650 WATTPSU
Total Cost thus far: $750cnd and one pissed off girlfriend...
Pissed off not so much at the expense but more-so her inevitable replacement...
Well I managed to screw everything into place and figure out where all the wires connect to! (Believe me, its a big deal for me )
I want this case to be a project for all of us to learn from.
My homework is to learn how to overclock via the internet, over the next couple days. I was hoping to OC' this chip from 2.7 to 3.0Ghz to start and with a new CPU fan in the near future, 3.4 Ghz and beyond...
ANYWAYS I fired up the Mobo and it went right into bios when I hit DLT.
CPU temp is around 50 C
SYS temp is around 22 C
All comments and suggestions are welcome! I can't wait to get an OS and get this show on the road!!
- JB
I also am waiting to figure out which OS I will be using 32bit or 64bit ect...
Any and all suggestions welcome at this point.
P.s I am already thinking about a solution for all these fans I have!! Some sort of fan speed controller for rpm.
How does one go about measuring the case temperature?
Last edited: