• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] MODDED ANTEC 900

dominator2

New Member
Joined
Jan 17, 2006
Messages
17 (0.00/day)
Location
Mountains below Yosemite,Ca
System Name Intel Scorpion
Processor Intel Q6600@3.4Ghz
Motherboard Gigabyte EP45-UD3R
Cooling Chilltec uLTRA (tec)
Memory 2X2 GIGS OCZ 1066
Video Card(s) evga 275 GTX(896 ddr3)
Storage 2-WD640 Raid 0 + 1 Terrabyte WD RC3
Display(s) 22"Samsung 2 ms
Case Antec 900
Audio Device(s) Realtec on Board
Power Supply TT ToughPower 700W
Software XP pro
To view this case mod, go here.



Specs:
Intel Q6600 @3.6GHZ
EP45-UD3R Motherboard
ChilTec Peltier cooler 25-33 degress
NVidia 27 GTX
4 Gigs OCZ 1066 ram
On Board Sound
2 WD640 HD in RAID 0 1 WD 3RC Terrabyte storage
20X Lite-on DVD-RW
TT ToughPower CM 700W Power supply

Mods:
Dissembled case and resprayed entire case black
Modded the Power switch panel 180 degrees. On/Off button is now on opposite side of case. Marbled the case top and sprayed black. Add fan rheostat in back of package tray to control BigBoy 200mm fan on top. Cut 80mm hole in motherboard tray and added side fan to blow air under motherboard. This dropped internal MB temps by 5 degrees. Added OCZ ram Cooler for chilly ram overclocking

Added Scythe 4 fan controller with Yate Loon HS 120mm fans. The CPU fan runs at 1900-2000 and the case fans run at 1600. This baby is "Quiet"
 
Last edited by a moderator:

HammerON

The Watchful Moderator
Staff member
Joined
Mar 2, 2009
Messages
8,397 (1.52/day)
Location
Up North
System Name Threadripper
Processor 3960X
Motherboard ASUS ROG Strix TRX40-XE
Cooling XSPC Raystorm Neo (sTR4) Water Block
Memory G. Skill Trident Z Neo 64 GB 3600
Video Card(s) PNY RTX 4090
Storage Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s) Dell 32" Curved Gaming Monitor (S3220DGF)
Case Corsair 5000D Airflow
Audio Device(s) On-board
Power Supply EVGA SuperNOVA 1000 G5
Mouse Roccat Kone Pure
Keyboard Corsair K70
Software Win 10 Pro
Benchmark Scores Always changing~
Looks pretty good ~ but could still use a little more cable management:)
 
Joined
May 12, 2009
Messages
5,196 (0.95/day)
System Name Dust Collector
Processor AMD Ryzen 5 3600X
Motherboard Asus B550I Aorus Pro WiFi AX
Cooling Alpenfohn Black Ridge V2 w/ Noctua NF-A9x14
Memory Corsair Vengeance LPX 16GB DDR4 3200MHz/CL16
Video Card(s) Power Color Red Dragon RX 5700 XT
Storage Samsung EVO+ 500GB NVMe
Display(s) Dell S2721DGF
Case Dan Case A4
Power Supply Corsair SF600 Platinum
Mouse Logitech G603
Keyboard Logitech G613
^What he said! And I think you need a smoother finish on that paint job, but nonetheless good lookin' case!
 

dominator2

New Member
Joined
Jan 17, 2006
Messages
17 (0.00/day)
Location
Mountains below Yosemite,Ca
System Name Intel Scorpion
Processor Intel Q6600@3.4Ghz
Motherboard Gigabyte EP45-UD3R
Cooling Chilltec uLTRA (tec)
Memory 2X2 GIGS OCZ 1066
Video Card(s) evga 275 GTX(896 ddr3)
Storage 2-WD640 Raid 0 + 1 Terrabyte WD RC3
Display(s) 22"Samsung 2 ms
Case Antec 900
Audio Device(s) Realtec on Board
Power Supply TT ToughPower 700W
Software XP pro
Antec 900

I intentionally marbled the top that is why it is not smooth. Since these picts were taken I have reverse installed the bottom hard drives eliminating the cabling requirements and I removed the top hard drive just below the DVD and installed it in a external esata enclosure. Will update picts in a couple of weeks
 
Joined
May 12, 2009
Messages
5,196 (0.95/day)
System Name Dust Collector
Processor AMD Ryzen 5 3600X
Motherboard Asus B550I Aorus Pro WiFi AX
Cooling Alpenfohn Black Ridge V2 w/ Noctua NF-A9x14
Memory Corsair Vengeance LPX 16GB DDR4 3200MHz/CL16
Video Card(s) Power Color Red Dragon RX 5700 XT
Storage Samsung EVO+ 500GB NVMe
Display(s) Dell S2721DGF
Case Dan Case A4
Power Supply Corsair SF600 Platinum
Mouse Logitech G603
Keyboard Logitech G613
^_^ I'm not a fan of the top paint job... but whatever rocks your boat buddy!
 
D

digitalblasphamy

Guest
good

i like it cause antec makes good cases but in my opinion if your going to go through the pain in the ass of striping a case for paint, then you should of gone with a more agresive color, maybe a uv blue or something but thats just me
 
Top