ex-dohctor
New Member
- Joined
- Jan 28, 2009
- Messages
- 112 (0.02/day)
- Location
- South Africa
| System Name | Caspar. |
|---|---|
| Processor | AMD Athlon 64Bit 4000+ (939). |
| Motherboard | Saphire Pure Innovation PI-A9RX480. |
| Cooling | Coolermaster Hyper 212 Cooler + 6 x 120mm CM Case fans. |
| Memory | 2GB Kingmax - DDR 400. |
| Video Card(s) | XFX ATI Radeon HD4650 512MB. |
| Storage | 2X Seagate Baracuda 500GB SATA - II (32MB Cache). |
| Display(s) | Samsung 19" LCD + Samsung 17" LCD. |
| Case | Coolermaster Centurion 590 (Stock for now). |
| Audio Device(s) | Onboard Audio. |
| Power Supply | Gigabyte Superb 500W. |
| Software | Windows XP Pro. SP3. |
Howdy all,
I am looking for the setup/config/user manual for an IBM SanBlade QLE2462 Qlogic Card.
I have an IBM Blade server here that is no longer able to see it's discs on the SAN.
I've been shown the most basic setup and trouble shooting steps to follow and I can see that both of the fibre adapters are both working, the adapters how ever cannot see the SAN/ the servers dedicated hard discs for some reason.
The last time this happened I had an IBM Technicial specialist in the server room with me and we were able to get this thing working (in about an hour).
The problem was that the host adapters first port went dead, so we moved the fibre cable to the second port of the first card and configured port two in the exact same way as the first port was configured.
I went through the same steps with this server tonight and so far nothing. I do not have access to the SVC consoles to see if I can check the Qlogic path from the host adapter to the hard discs in the SAN.
I am sure that the problem lies on the servers fibre host adapters config table though.
I need to find a more in depth explanation on how to trouble shoot/configure these devices from scratch again.
Any help will be appreciated.
Thanks in advance.
I am looking for the setup/config/user manual for an IBM SanBlade QLE2462 Qlogic Card.
I have an IBM Blade server here that is no longer able to see it's discs on the SAN.
I've been shown the most basic setup and trouble shooting steps to follow and I can see that both of the fibre adapters are both working, the adapters how ever cannot see the SAN/ the servers dedicated hard discs for some reason.
The last time this happened I had an IBM Technicial specialist in the server room with me and we were able to get this thing working (in about an hour).
The problem was that the host adapters first port went dead, so we moved the fibre cable to the second port of the first card and configured port two in the exact same way as the first port was configured.
I went through the same steps with this server tonight and so far nothing. I do not have access to the SVC consoles to see if I can check the Qlogic path from the host adapter to the hard discs in the SAN.
I am sure that the problem lies on the servers fibre host adapters config table though.
I need to find a more in depth explanation on how to trouble shoot/configure these devices from scratch again.
Any help will be appreciated.
Thanks in advance.
