TmdRockz™
New Member
- Joined
- Aug 25, 2008
- Messages
- 236 (0.04/day)
- Location
- SRI LANKA
| System Name | MSI ! |
|---|---|
| Processor | Intel Core 2 Duo E8400 C0 @ 3.6 Ghz (1.28v) |
| Motherboard | MSI P45T-C51 |
| Cooling | Xigmatek HDT S1283 + Arctic Cooling MX-2 |1x120mm Exhaust |
| Memory | Kingston Value RAM 4GB DDR2 800Mhz Dual Channel | 5-5-5-15 [1.89v) |
| Video Card(s) | Sapphire Radeon HD4850 Dual Slot (625/993) | Fan:100% |
| Storage | Samsung SpinPoint T HD501LJ 500GB |
| Display(s) | Samsung 943NWX 19" LCD 5ms |
| Case | Codegen 9011 |
| Audio Device(s) | Realtek = Creative SBS 2.1 370 |
| Power Supply | FSP 700W |
| Software | Windows 7 Ultimate ! |
Default Voltages - NB - 1.10v
CPU - 1.22v
Rams - 1.8v
Default FSB - 333 (x9)
So i increased the CPU vcore to 1.26v and Increased the NB to 1.18v and went 3.5 Ghz. that means 390 FSB (1:1 Ratio) so Ram voltage is still the same.. but when i select 400FSB (RAM - 800 Mhz) and These voltages (1.27v for CPU and 1.21v for NB) the pc doesnt boot.. it tries to boot about 3 times and comes to default settings..
I had a Foxconn MARS earlier. I OCed it to 3.6 using these voltages
1.28v for CPU
1.25v for NB
FSB - 400
that mobo is p35 and this is p45 .. so what do i need to do now to go for 3.6 Ghz ? wht do i need to increase ? after 1.27v CPU vcore is red colour .. and after 1.25v NB v is also red.
increasing volatages , will it damage the board ? or just we hav to care about the temperates ?
CPU - 1.22v
Rams - 1.8v
Default FSB - 333 (x9)
So i increased the CPU vcore to 1.26v and Increased the NB to 1.18v and went 3.5 Ghz. that means 390 FSB (1:1 Ratio) so Ram voltage is still the same.. but when i select 400FSB (RAM - 800 Mhz) and These voltages (1.27v for CPU and 1.21v for NB) the pc doesnt boot.. it tries to boot about 3 times and comes to default settings..
I had a Foxconn MARS earlier. I OCed it to 3.6 using these voltages
1.28v for CPU
1.25v for NB
FSB - 400
that mobo is p35 and this is p45 .. so what do i need to do now to go for 3.6 Ghz ? wht do i need to increase ? after 1.27v CPU vcore is red colour .. and after 1.25v NB v is also red.
increasing volatages , will it damage the board ? or just we hav to care about the temperates ?
)