• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

The AMD Phenom II OC'ers Club

Joined
Jul 19, 2006
Messages
43,587 (6.71/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
2400MHz ? You said 2000-2200MHz is the highest, above that no benefit. Ok then - 2 more days left til i place an order & get TRUE : by the end of this week i'll conduct something, deal. See you all in 3.9-4.0GHz wonderland people, lol. :toast:

This is how it works.

You want the NB to be three times that of the RAM frequency. So for 1600Mhz RAM (800 x 800) You will want the NB to be at 2400Mhz (800 x 800 x 800)

1333Mhz RAM will need a 2000Mhz NB.

1800Mhz RAM will need a 2700Mhz NB.

etc...
 
Joined
Jun 16, 2009
Messages
5,123 (0.94/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
This is how it works.

You want the NB to be three times that of the RAM frequency. So for 1600Mhz RAM (800 x 800) You will want the NB to be at 2400Mhz (800 x 800 x 800)

1333Mhz RAM will need a 2000Mhz NB.

1800Mhz RAM will need a 2700Mhz NB.

etc...

that also counts for lower timings;)
 
Joined
May 12, 2009
Messages
973 (0.18/day)
System Name YautjaLord
Processor Ryzen 9 5900x @ 3700MHz
Motherboard Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s) 1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) |Samsung T7 Shield 1TB USB Type-C
Display(s) LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s) Integrated
Power Supply Corsair HX1200
Mouse Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard Corsair K60 Pro Low Profile
Software Windows 10 Pro 64-bit 21H2
2erocker & Wafer :

Unless the RAM is 1066MHz DDR2 (533x533x533)+heat issues not solved (case cooling not exstensive enough). Thanx to both of you nevertheless. BTW : The RAM is courtsey of OCZ, PC28500 Reaper HPC to be correct.

Just wait 2 more days. :D
 
Joined
Feb 24, 2009
Messages
3,516 (0.63/day)
System Name Money Hole
Processor Core i7 970
Motherboard Asus P6T6 WS Revolution
Cooling Noctua UH-D14
Memory 2133Mhz 12GB (3x4GB) Mushkin 998991
Video Card(s) Sapphire Tri-X OC R9 290X
Storage Samsung 1TB 850 Evo
Display(s) 3x Acer KG240A 144hz
Case CM HAF 932
Audio Device(s) ADI (onboard)
Power Supply Enermax Revolution 85+ 1050w
Mouse Logitech G602
Keyboard Logitech G710+
Software Windows 10 Professional x64
Already tried.

How many bumps?

I havn't tested small OCCT but it should only stress the cores and maybe some cache right? Might try a little cpu-nb too.

I'm finding that I'm liking this MA790XT-UD4P a lot better than the MSI 770-C45. Sure its a higher end board, but it does a lot better job being stable with voltages.

AMD OD shows right voltages but:
cpu: +.175
cpu-nb: +.125
 
Last edited:
Joined
Jan 20, 2010
Messages
868 (0.17/day)
Location
Toronto, ON. Canada
System Name Gamers PC
Processor AMD Phenom II X4 965 BE @ 3.80 GHz
Motherboard MSI 790FX-GD70 AM3
Cooling Corsair H50 Cooler
Memory Corsair XMS3 4GB (2x2GB) DDR3-1333
Video Card(s) XFX Radeon HD 5770 1GB GDDR5
Storage 2 x WD Caviar Green 1TB SATA300 w/64MB Buffer (RAID 0)
Display(s) Samsung 2494SW 1080p 24" WS LCD HD
Case CM HAF 932 Full Tower Case
Audio Device(s) Creative SB X-FI TITANIUM -PCIE x 1
Power Supply Corsair TX Series CMPSU-650TX (650W)
Software Windows 7 Ultimate 64-bit
Well with all the crap Intel was doing, AMD just couldn't afford the extra R&D to release a CPU to whoop Intels arse. That's why Intel is getting sued now. AMD was forced to sell at less in order to compete. Let me tell you though, they still make some kick ass CPU's :rockout:
Yes its sad when Intel bribed DELL and many more companies to not carry AMD. Intel was caught giving deep discounts on Intel CPU's if you don't carry AMD.
 
Joined
Oct 15, 2008
Messages
31 (0.01/day)
System Name mime_fx
Processor Phenom II 940 BE @3780 (CACVC AC 0849DPAW)
Motherboard Asus M4A79 Deluxe
Cooling H50
Memory 2x 2048 G.Skill F2-8500CL5D 1066@1120MHz 5.5.5.15.22 T2 2.16v
Video Card(s) 2x connect3d HD4850@ 700/2200(Zalman Z-Machine GV1000)
Storage WESTERN DIGITAL WD3000HLFS VELOCIRAPTOR
Display(s) LG 32LE5500
Case Lian Li Pitstop T60 DIY Test Bench
Audio Device(s) -
Power Supply SilverStone OP1000
Software Windows 7 32bit
Benchmark Scores 3DMark06: 21210
This is how it works.

You want the NB to be three times that of the RAM frequency. So for 1600Mhz RAM (800 x 800) You will want the NB to be at 2400Mhz (800 x 800 x 800)

1333Mhz RAM will need a 2000Mhz NB.

1800Mhz RAM will need a 2700Mhz NB.

etc...


what about DDR2?

 
Joined
Feb 24, 2009
Messages
3,516 (0.63/day)
System Name Money Hole
Processor Core i7 970
Motherboard Asus P6T6 WS Revolution
Cooling Noctua UH-D14
Memory 2133Mhz 12GB (3x4GB) Mushkin 998991
Video Card(s) Sapphire Tri-X OC R9 290X
Storage Samsung 1TB 850 Evo
Display(s) 3x Acer KG240A 144hz
Case CM HAF 932
Audio Device(s) ADI (onboard)
Power Supply Enermax Revolution 85+ 1050w
Mouse Logitech G602
Keyboard Logitech G710+
Software Windows 10 Professional x64
Hey CP or Jr, what's the best bios for the 790FXT-UD5P?

I looked in the bios and this one has F4 which I don't see listed at Gigabyte's site. I've got a P2 550 that is suppose to fully unlock to a 3.5Ghz on stock voltage. The F4 doesn't have the special ACC that my 790XT-UD4P had and I'm not sure which one to update to from Gigabyte's site.
 
Joined
Jan 20, 2010
Messages
868 (0.17/day)
Location
Toronto, ON. Canada
System Name Gamers PC
Processor AMD Phenom II X4 965 BE @ 3.80 GHz
Motherboard MSI 790FX-GD70 AM3
Cooling Corsair H50 Cooler
Memory Corsair XMS3 4GB (2x2GB) DDR3-1333
Video Card(s) XFX Radeon HD 5770 1GB GDDR5
Storage 2 x WD Caviar Green 1TB SATA300 w/64MB Buffer (RAID 0)
Display(s) Samsung 2494SW 1080p 24" WS LCD HD
Case CM HAF 932 Full Tower Case
Audio Device(s) Creative SB X-FI TITANIUM -PCIE x 1
Power Supply Corsair TX Series CMPSU-650TX (650W)
Software Windows 7 Ultimate 64-bit

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.58/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Bleh, I gotta revert to XP on this machine, Nvidia really fucked NF2 and NF3 users over by not providing an Optimized GART for windows 7
 
Joined
Nov 27, 2007
Messages
28,823 (4.81/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh WQHD Computer Monitor
Case Phanteks NV7
Power Supply Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software Windows 11 Pro
Hey CP or Jr, what's the best bios for the 790FXT-UD5P?

I looked in the bios and this one has F4 which I don't see listed at Gigabyte's site. I've got a P2 550 that is suppose to fully unlock to a 3.5Ghz on stock voltage. The F4 doesn't have the special ACC that my 790XT-UD4P had and I'm not sure which one to update to from Gigabyte's site.

I've only used one BIOS and it's the one released on 9/16/09. JR was using a beat one I believe that was working out pretty good for him.
 
Joined
Feb 24, 2009
Messages
3,516 (0.63/day)
System Name Money Hole
Processor Core i7 970
Motherboard Asus P6T6 WS Revolution
Cooling Noctua UH-D14
Memory 2133Mhz 12GB (3x4GB) Mushkin 998991
Video Card(s) Sapphire Tri-X OC R9 290X
Storage Samsung 1TB 850 Evo
Display(s) 3x Acer KG240A 144hz
Case CM HAF 932
Audio Device(s) ADI (onboard)
Power Supply Enermax Revolution 85+ 1050w
Mouse Logitech G602
Keyboard Logitech G710+
Software Windows 10 Professional x64
Looks like F7 from their site. That's what I was going to go with but wanted to make sure just in case.
 
Joined
Oct 15, 2008
Messages
31 (0.01/day)
System Name mime_fx
Processor Phenom II 940 BE @3780 (CACVC AC 0849DPAW)
Motherboard Asus M4A79 Deluxe
Cooling H50
Memory 2x 2048 G.Skill F2-8500CL5D 1066@1120MHz 5.5.5.15.22 T2 2.16v
Video Card(s) 2x connect3d HD4850@ 700/2200(Zalman Z-Machine GV1000)
Storage WESTERN DIGITAL WD3000HLFS VELOCIRAPTOR
Display(s) LG 32LE5500
Case Lian Li Pitstop T60 DIY Test Bench
Audio Device(s) -
Power Supply SilverStone OP1000
Software Windows 7 32bit
Benchmark Scores 3DMark06: 21210
Last edited:
Joined
May 12, 2009
Messages
973 (0.18/day)
System Name YautjaLord
Processor Ryzen 9 5900x @ 3700MHz
Motherboard Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s) 1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) |Samsung T7 Shield 1TB USB Type-C
Display(s) LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s) Integrated
Power Supply Corsair HX1200
Mouse Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard Corsair K60 Pro Low Profile
Software Windows 10 Pro 64-bit 21H2
Got the f***er (TRUE) & guess what - the guys rushed & delivered me 1366 RT instead of Rev. A HSF. :roll: Replace it tomorrow with Rev. A coz you know, LGA 1366 & AM2+ are 2 different sockets. :laugh: Once i get the replacement, i'll be sure to check for mirror finish & stuff+by the end of this month get another pair of fan clips (currently have only pair) & another 120mm CM's SickelFlow fan.

P.S. Wafer, by the time i'll get this month's salary (in April 10) - i get my hands on 2 Enermax Magmas (120mm version). You've being warned - i hope they good with TRUE. Also - by the end of this month i'll (hopefully) post 3.9GHz overclock. :toast:
 

JrRacinFan

Served 5k and counting ...
Joined
Mar 17, 2007
Messages
20,073 (3.21/day)
Location
Youngstown, OH
System Name Dual Build Streamer
Processor Ryzen 7900x3d : Ryzen 4600G
Motherboard AsRock B650E Steel Legend : Giga B450i Aorus
Cooling Custom Water 1x420 : Stock
Memory 32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s) PowerColor 7900 XTX Liquid Devil: iGPU
Storage 20+ TB
Display(s) Sammy 49" 5k Ultrawide
Case Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s) Onboard : Onboard
Power Supply EVGA 1200W P2
Mouse Corsair M65 RGB Elite White
Keyboard Hyperx Origins 65
Software Windows 10
How many bumps?

I havn't tested small OCCT but it should only stress the cores and maybe some cache right? Might try a little cpu-nb too.

I'm finding that I'm liking this MA790XT-UD4P a lot better than the MSI 770-C45. Sure its a higher end board, but it does a lot better job being stable with voltages.

AMD OD shows right voltages but:
cpu: +.175
cpu-nb: +.125
http://i188.photobucket.com/albums/z43/mastrdrver/GA280x125LinXfasterram.jpg

Puished up to 1.45v on both vcore and cpu->nb.
Hey CP or Jr, what's the best bios for the 790FXT-UD5P?

I looked in the bios and this one has F4 which I don't see listed at Gigabyte's site. I've got a P2 550 that is suppose to fully unlock to a 3.5Ghz on stock voltage. The F4 doesn't have the special ACC that my 790XT-UD4P had and I'm not sure which one to update to from Gigabyte's site.

If you are on air the best bios is F3K. On water, F5. If needing C3 support you will have to use the mediocre F7 bios til F8 gets released. F8 is still rather buggy but it will have core control options. For unlocking you will want to use the F5 bios.
 
Last edited:
Joined
Jun 16, 2009
Messages
5,123 (0.94/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
Got the f***er (TRUE) & guess what - the guys rushed & delivered me 1366 RT instead of Rev. A HSF. :roll: Replace it tomorrow with Rev. A coz you know, LGA 1366 & AM2+ are 2 different sockets. :laugh: Once i get the replacement, i'll be sure to check for mirror finish & stuff+by the end of this month get another pair of fan clips (currently have only pair) & another 120mm CM's SickelFlow fan.

P.S. Wafer, by the time i'll get this month's salary (in April 10) - i get my hands on 2 Enermax Magmas (120mm version). You've being warned - i hope they good with TRUE. Also - by the end of this month i'll (hopefully) post 3.9GHz overclock. :toast:

as said, we will see;)
maybe your chip is better than mine, who knows,eh?:D
you will enjoy the fans, and you will be able to see a clear difference
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.27/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
Bleh, I gotta revert to XP on this machine, Nvidia really fucked NF2 and NF3 users over by not providing an Optimized GART for windows 7

i think there is a hacked driver out or at least there was last time i played with NF3 i think asrock actually released it...
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.79/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Bleh, I gotta revert to XP on this machine, Nvidia really fucked NF2 and NF3 users over by not providing an Optimized GART for windows 7

Nf2 released in 2002 and nf3 released in either 2003 or 04. I don't really blame them. No nf3 on Vista was a little less excusable tho.
 
Joined
Oct 1, 2006
Messages
4,884 (0.76/day)
Location
Hong Kong
Processor Core i7-12700k
Motherboard Z690 Aero G D4
Cooling Custom loop water, 3x 420 Rad
Video Card(s) RX 7900 XTX Phantom Gaming
Storage Plextor M10P 2TB
Display(s) InnoCN 27M2V
Case Thermaltake Level 20 XT
Audio Device(s) Soundblaster AE-5 Plus
Power Supply FSP Aurum PT 1200W
Software Windows 11 Pro 64-bit
Joined
May 12, 2009
Messages
973 (0.18/day)
System Name YautjaLord
Processor Ryzen 9 5900x @ 3700MHz
Motherboard Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s) 1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) |Samsung T7 Shield 1TB USB Type-C
Display(s) LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s) Integrated
Power Supply Corsair HX1200
Mouse Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard Corsair K60 Pro Low Profile
Software Windows 10 Pro 64-bit 21H2
as said, we will see;)
maybe your chip is better than mine, who knows,eh?:D
you will enjoy the fans, and you will be able to see a clear difference

The bet is on, then. lol
Who knows, who knows........ :)
What about Scythe GentleTyphoon or Thermalright's 120mm ? Thanx nevertheless. And again - i hope Magmas are really good @ what they do, once i'll have them installed. :toast:
 
Joined
Jun 16, 2009
Messages
5,123 (0.94/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
The bet is on, then. lol
Who knows, who knows........ :)
What about Scythe GentleTyphoon or Thermalright's 120mm ? Thanx nevertheless. And again - i hope Magmas are really good @ what they do, once i'll have them installed. :toast:

i have no experience with them, but they lack a few technologies, that are exclusive to Enermax (batwing blades, for example. also no Magnet Bearing, and no removal of the blades;))
they probably will be good either. but when Magmas are made for one Purpose, then this Purpose is, pushing Air thru even the tightest fins.no matter how restrictive the fin design is. ;)
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.58/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
So much for Windows 7 on this NF2 Motherboard, the Built in GART sucks ass. Atleast in XP the performance was good, due to having an actuall NV Gart. Oh Well time to put 7 on the laptop and put XP back on here until I upgrade the Motherboard and CPU.
 
Joined
May 12, 2009
Messages
973 (0.18/day)
System Name YautjaLord
Processor Ryzen 9 5900x @ 3700MHz
Motherboard Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s) 1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) |Samsung T7 Shield 1TB USB Type-C
Display(s) LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s) Integrated
Power Supply Corsair HX1200
Mouse Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard Corsair K60 Pro Low Profile
Software Windows 10 Pro 64-bit 21H2
but when Magmas are made for one Purpose, then this Purpose is, pushing Air thru even the tightest fins.no matter how restrictive the fin design is. ;)

You said that, i didn't pulled you by your tongue. Deal then, Magmas it is. But the RPM is @ 1500 for 120mm fan (there's also 80mm one, i think). But you can't argue with 69CFM & 18dBa, that's given. 3000RPM, ~140CFM, 36dBa for both fans+that BATWING stuff - tasty s***. :laugh: I'll tell you what happens bout the purchase when i'll get the salary. :) :toast:
 
Joined
Mar 10, 2010
Messages
11,878 (2.30/day)
Location
Manchester uk
System Name RyzenGtEvo/ Asus strix scar II
Processor Amd R5 5900X/ Intel 8750H
Motherboard Crosshair hero8 impact/Asus
Cooling 360EK extreme rad+ 360$EK slim all push, cpu ek suprim Gpu full cover all EK
Memory Corsair Vengeance Rgb pro 3600cas14 16Gb in four sticks./16Gb/16GB
Video Card(s) Powercolour RX7900XT Reference/Rtx 2060
Storage Silicon power 2TB nvme/8Tb external/1Tb samsung Evo nvme 2Tb sata ssd/1Tb nvme
Display(s) Samsung UAE28"850R 4k freesync.dell shiter
Case Lianli 011 dynamic/strix scar2
Audio Device(s) Xfi creative 7.1 on board ,Yamaha dts av setup, corsair void pro headset
Power Supply corsair 1200Hxi/Asus stock
Mouse Roccat Kova/ Logitech G wireless
Keyboard Roccat Aimo 120
VR HMD Oculus rift
Software Win 10 Pro
Benchmark Scores 8726 vega 3dmark timespy/ laptop Timespy 6506
Acc

Despite my noobness i would appreciate some advice overclocking a phenom 2 550be on an asrock m3770be mobo, ive not clockrd an AMD chip since my old Athlon so not sure on few things and its a m8s so dont wana blow it spesh cos on stock cooler, any way i wana know oppinions do i open the 2 hidden cores i found n work to get em stable or oc it a bit in which case whats the max voltage these will take 1.5v? and ive ad a bit of a look but can anyone post typical settings for oc just the main ones maybe nb pll htt etc thanks in advance oh n watercoolin n lappin my top tips for stability n core temps esspecially lappin tho:respect:

AMD cpu next time i think after 1 look at my mates

Abit x38 Q6600 8*450 3.6 ocz flex2 1150ddr2
Radeon 5870lc 8600gts physx
win7 64
 
Last edited:
Joined
Jul 19, 2006
Messages
43,587 (6.71/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
RAM Help

Allright, so I'm using some Crucial Ballistix DDR3 1333Mhz 6 6-6-20 1.8v RAM. At one point I had all of my timings, subtimings and latencies manually set through information obtained in this thread. I cannot remember which member posted the numbers nor can I find the post through means of the search engine. If anyone has this information or can find the post for me I will be very grateful. :)
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.61/day)
6-6-6-18-5-24-10-4-5-2-5-4-4-90-90, going down, on ASUS bios.

;)

If it's manual mem timings, it's me. :laugh:
 
Top