I had the exact same error and this is how i fixed it
--------------------------------------------------------------------------------
If you have been suffering messages such as 'Adapter not Found' , 'ERROR 0FL01' , 'Invalid Adapter or BIOS Selected' when trying to flash or reflash your Video cards Bios and you are lucky enough to own a PC capable of running more than one PCI-E Video card then this could just be the Guide you've been looking for.
--------------
Required Files
--------------
*HP USB Disk Storage Format Tool
http://h20000.www2.hp.com/bizsupport...reg_R1002_USEN
--------------
*USB Boot Files
http://www.4shared.com/file/43544416...FILES.html?s=1
--------------
*ATIFlash
http://www.techpowerup.com/downloads...sh 3.79.html
--------------
*Your Video Cards Bios
http://www.techpowerup.com/vgabios/i...ace=&memSize=0
------
Part 1
------
Step 1 Create USB Boot Drive with HP USB Disk Storage Format Tool
Step 2 Copy all the USB Boot files to the USB Boot Drive (do not overwrite files when prompted)
Step 3 Copy ATIFlash files USB Boot Drive
Step 4 Copy new BIOS file to USB BOOT Drive (name it something like bios.bin as you will be using this name in a DOS Prompt later on)
------
Part 2
------
Step 1 Boot into 'Safe Mode' (by pressing f8 before booting into Windows)
Step 2 Uninstall ATI Drivers and Associated Software then Reboot
\
Step 3 Go to Device Manager 'Display Adapters' and Uninstall (including Software when prompted)
Step 4 SHUT DOWN your PC (DO NOT REBOOT, if you should so happen to Reboot repeat Step 3 above)
------
Part 3
------
Step 1 Remove your Video Card from the top PCI-E slot and place it in a different PCI-E slot (this is the step that sets this Guide apart from all the others)
Step 2 Reboot into your Mobo's Bios
Step 3 Once in your Mobo's Bios change the first Boot Device to USB-HDD (or your Equivalent setting) then Reboot
Step 4 At the C:\ Prompt type, atiflash -ai 0 ,this will provide you with proof that your Video Card does infact exist
Step 5 At the C:\ Prompt type, atiflash -unlockrom 0 , i suggest you do this because some Bios files are infact locked and can't be flashed until unlocked
Step 6 At the C:\ Prompt type, atiflash -f -p 0 bios.rom , this is when your Bios is actually flashed
Step 7 Once your Bios has been flashed simply 'Ctrl+Alt+Delete' to restart your PC
Step 8 Go straight back into your Mobo's Bios and change your first Boot Device back to what it was (probably HDD) then Reboot for the final time and your finished
------