• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Socket Pin Burnout Returns to Haunt LGA1155?

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Some things should be cleared up.

1.) We do not know that he received the board this way from Gigabyte. He simply states that "upon arrival" there were burnt pins. However, he could have recieved it from another reviewer that tested it first, and the reviewer screwed up the pins. I know that when you review parts, they don't always come directly from the manufacturer. The manufacturer sends out the part to one person for review, then tells the reviewer where to send it when they are done.

2.) The reviewer posting about the problem has no idea what voltage was used, because he didn't burn the pins.

Now, as for my own observations from the pictures, it seems at least one of the pins is actually broken off. So my guess would be that one of the previous reviewers were a little rough with removing and inserting the processor, and broke a few pins. This was still enough to make contact, but caused the arcing situation. Of course there is the other pin that isn't broken but is still burnt, but that can be caused by the extra stress of more power going through that one pin because the others are failing.
 

bear jesus

New Member
Joined
Aug 12, 2010
Messages
1,534 (0.31/day)
Location
Britland
System Name Gaming temp// HTPC
Processor AMD A6 5400k // A4 5300
Motherboard ASRock FM2A75 PRO4// ASRock FM2A55M-DGS
Cooling Xigmatek HDT-D1284 // stock phenom II HSF
Memory 4GB 1600mhz corsair vengeance // 4GB 1600mhz corsair vengeance low profile
Storage 64gb sandisk pulse SSD and 500gb HDD // 500gb HDD
Display(s) acer 22" 1680x1050
Power Supply Seasonic G-450 // Corsair CXM 430W
So my guess would be that one of the previous reviewers were a little rough with removing and inserting the processor, and broke a few pins. This was still enough to make contact, but caused the arcing situation. Of course there is the other pin that isn't broken but is still burnt, but that can be caused by the extra stress of more power going through that one pin because the others are failing.

I had just assumed that maybe the pin was stuck to the CPU after the burn out and was broke when removing it but surly that would be something you would not miss as i thought when the retention bracket was open there was nothing holding the CPU in the socket thus any resistance would be very noticeable.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
why they lame INTEL, i know gigabyte sockets made by FOXCONN, if have gigabyte p55 series u can see it written on the side, and i read something exactly like this when was searching on bad things on Gigabyte p55 mobos.
LOTES still best socket made manufacture.
also they say new gigabyte A series sockets made by LOTES
 
Last edited:

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Some things should be cleared up.

1.) We do not know that he received the board this way from Gigabyte. He simply states that "upon arrival" there were burnt pins. However, he could have recieved it from another reviewer that tested it first, and the reviewer screwed up the pins. I know that when you review parts, they don't always come directly from the manufacturer. The manufacturer sends out the part to one person for review, then tells the reviewer where to send it when they are done.

lots of reviewers are like "if I don't get to keep the parts, I'm not very likely to do the review. Keeping the parts sent for review is how reviewers, in the most part, get paid. Guys selling lots of "new" parts, on a regular basis...reviewer.
 
Last edited by a moderator:

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
lots of reviewers are like "if I don't get to keep the parts, I'm not very likely to do the review. Keeping the parts sent for review is how reviewers, in the most part, get paid. Guys selling lots of "new" parts, on a regular basis...reviewer.

Not how it works. And reviewers get paid by ad revenue generated by their review, not by keeping the parts to resell. Ask W1z if he gets to keep the cards he reviews and I bet he responds something like:

whether the sample goes back or not depends on the company.

i have no problem sending stuff back as long as i can keep one card for rebenching (which i'm doing right now. 5 days of non-stop benching so far and not even done with nvidia)

no problem sharing the coke, hookers will be decided on a case by case basis

And in a lot of cases they won't tell you to ship the part back, instead they will tell you to ship it to the next reviewer. Saves time and money on shipping the part back to the company only to have them ship it to the next reviewer themselves. Of course the down side is situations like this where the part was damaged by a previous reviewer.
 
Last edited by a moderator:
Joined
Apr 4, 2008
Messages
50 (0.01/day)
System Name Sky_Fire
Processor Intel Core I5 2500
Motherboard ASRock Z77 Extreme3
Cooling COOLER MASTER Hyper TX3 RR-910-HTX3-G1
Memory G.SKILL Ripjaws Series 8GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666)
Video Card(s) Two GTX 660's SLI
Storage Seagate Barracuda 7200.12 ST31000528AS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5
Display(s) Samsung P2570HD
Case Cooler Master Cosmos II
Audio Device(s) Sound blaster Zx
Power Supply XFX 1050watt (Seasonic)
Software W$ 7 64bit
I would not assume that GB or intel are at fault when there isn't enough information in this blog. I've build two computers with GB mobos and have had nps. I'm also waiting on one for my new system. GB is top of the line quality just like Asus, MSI. There is not enough information here to make a logical choice as to what really happend.
 
Last edited:
Joined
Apr 8, 2009
Messages
3,016 (0.55/day)
Location
vermont
System Name The wifes worst enemy
Processor i5-9600k
Motherboard Asrock z390 phantom gaming 4
Cooling water
Memory 16gb G.skill ripjaw DDR4 2400 4X4GB 15-15-15-35-2T
Video Card(s) Asrock 5600xt phantom gaming 6gb 14gb/s
Storage crucial M500 120GB SSD, Pny 256GB SSD, seagate 750GB, seagate 2TB HDD, WD blue 1TB 2.5" HDD
Display(s) 27 inch samsung @ 1080p but capable of much more ;)
Case Corsair AIR 540 Cube Mid tower
Audio Device(s) onboard
Power Supply EVGA GQ1000W MODULAR
Mouse generic for now
Keyboard generic for now
Software gotta love steam, origin etc etc
Benchmark Scores http://hwbot.org/user/philbrown_23/
ALL new 1155 mobo reviews I've seen ALL have the LOTES hold down at least and most whole LOTES socket, Personally I think this is a freak accident as there is only one report before big time benchers all over were getting it and that is not the case now. Besides the foxconn issues were sorted out VERY soon after initial reports. I am using a 2nd gen foxconn socket on my P55 and NEVER any sighns of any socket burning, this is with 6 diff cpu's from 2 to 8 cores, ALL benched hard.
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Not how it works. And reviewers get paid by ad revenue generated by their review, not by keeping the parts to resell. Ask W1z if he gets to keep the cards he reviews and I bet he responds something like:

Not how it works. Speaking in terms of the actual reviewer, many reviewers get paid by being able to keep the product. Many other reviewers get paid per review, keep the product, etc.
 

Completely Bonkers

New Member
Joined
Feb 6, 2007
Messages
2,576 (0.41/day)
Processor Mysterious Engineering Prototype
Motherboard Intel 865
Cooling Custom block made in workshop
Memory Corsair XMS 2GB
Video Card(s) FireGL X3-256
Display(s) 1600x1200 SyncMaster x 2 = 3200x1200
Software Windows 2003
I'm really surprised that a low-voltage contact can arc. Yes, I would expect a higher-than-spec current through a small or bad contact could cause a "burnout" just like the way a fuse works, but I am really surprised that circa 1v can create an arc.

For anyone with a physics background, I have just learned about Paschen curves and field emission. Here is an easy read for those interested: http://www.lorentzcenter.nl/lc/web/2010/424/PROBLEMS/NXP/OverviewWallashspie.pdf
 
Joined
Nov 4, 2005
Messages
11,654 (1.73/day)
System Name Compy 386
Processor 7800X3D
Motherboard Asus
Cooling Air for now.....
Memory 64 GB DDR5 6400Mhz
Video Card(s) 7900XTX 310 Merc
Storage Samsung 990 2TB, 2 SP 2TB SSDs and over 10TB spinning
Display(s) 56" Samsung 4K HDR
Audio Device(s) ATI HDMI
Mouse Logitech MX518
Keyboard Razer
Software A lot.
Benchmark Scores Its fast. Enough.
This isn't in a vacum, however that looks more like the pins were carrying more than they could handle. Arcing should occur on the pads as they are physically closer than the pins.
 

HillBeast

New Member
Joined
Jan 16, 2010
Messages
407 (0.08/day)
Location
New Zealand
System Name Kuja
Processor Intel Core i7 930
Motherboard Gigabyte X58A-UD3R
Cooling Corsair H50 HB.o Special Edition with Koolance CHC-122 NB Block
Memory OCZ Extreme Edition 4GB Dual Channel
Video Card(s) Sapphire Radeon 5870 Vapor-X Rev. 2
Storage 2x 1TB WD Green in RAID
Display(s) BenQ V2400W
Case Lian Li PC-A17 HB.o Special Edition
Audio Device(s) Onboard Realtek 889A
Power Supply Gigabyte Odin Pro 800W
Software Windows 7 Professional
Benchmark Scores 93632 sysPoints in sysTest '09 47 FPS in Star Tales Benchmark
Glad I'm on 1366. That's all I have to say. Oh and 1156/1155 fanbois who flame me saying 'OH IT WAS JUST A FEW BOARDS THAT DID IT! 1156/1155 IS STILL GOOD!!1one'. STFU. Your socket is for mainstream. Stop trying to use it for high end. Get 1366 and stop being a cheapskate.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
Glad I'm on 1366. That's all I have to say. Oh and 1156/1155 fanbois who flame me saying 'OH IT WAS JUST A FEW BOARDS THAT DID IT! 1156/1155 IS STILL GOOD!!1one'. STFU. Your socket is for mainstream. Stop trying to use it for high end. Get 1366 and stop being a cheapskate.

You can go on about your 1366 being so much more extreme than my 1156, but when my 1156 is outperforming your 1366 for half the price it doesn't really hold up.;)
 
D

Deleted member 74752

Guest
My bud on the bot team has been banging his Gigabyte (GA-P67A-UD5) for a week now at 5.3GHz on water and reports no problems.
 

miahallen

New Member
Joined
Apr 12, 2006
Messages
133 (0.02/day)
System Name MAX11L
Processor i5 750 @ 4.2GHz
Motherboard Gigabyte H55N-USB3
Cooling Corsair H70
Memory Corsair Dominator GTX3 @ DDR3-2100 6-9-6 1T
Video Card(s) eVGA 480 GTX @ 800/1000
Storage 80GB Intel X25M + 500GB Seagate Momentus XT
Case Silverstone SUGO SG05
Audio Device(s) onboard
Power Supply Silverstone ST45SF 450W SFX
Software Windows 7 x64
Benchmark Scores Check full performance review here: http://www.techreaction.net/2010/09/24/gaming-in-tight-spaces-p
Some things should be cleared up.

1.) We do not know that he received the board this way from Gigabyte. He simply states that "upon arrival" there were burnt pins. However, he could have recieved it from another reviewer that tested it first, and the reviewer screwed up the pins. I know that when you review parts, they don't always come directly from the manufacturer. The manufacturer sends out the part to one person for review, then tells the reviewer where to send it when they are done.

2.) The reviewer posting about the problem has no idea what voltage was used, because he didn't burn the pins.

Now, as for my own observations from the pictures, it seems at least one of the pins is actually broken off. So my guess would be that one of the previous reviewers were a little rough with removing and inserting the processor, and broke a few pins. This was still enough to make contact, but caused the arcing situation. Of course there is the other pin that isn't broken but is still burnt, but that can be caused by the extra stress of more power going through that one pin because the others are failing.

The board was sent to me directly from Gigabyte HQ in TW...but it appeared to have been used previously.
 
Last edited:
Joined
Jul 19, 2008
Messages
1,180 (0.21/day)
Location
Australia
Processor Intel i7 4790K
Motherboard Asus Z97 Deluxe
Cooling Thermalright Ultra Extreme 120
Memory Corsair Dominator 1866Mhz 4X4GB
Video Card(s) Asus R290X
Storage Samsung 850 Pro SSD 256GB/Samsung 840 Evo SSD 1TB
Display(s) Samsung S23A950D
Case Corsair 850D
Audio Device(s) Onboard Realtek
Power Supply Corsair AX850
Mouse Logitech G502
Keyboard Logitech G710+
Software Windows 10 x64
The board was sent to me directly from Gigabyte HQ in TW...but it appeared to have been used previously.

That makes sense, if they are loan/test boards they most likely have been tested by several people. Why give out brand new boards for you guys to wreck. Hahaha

No doubt the first thing the testers do is push the board to its limits and someone went a little too far. When its not your board and you didnt pay for it who cares right?

This publicity could be a little unfair to Gigabyte, if a tester pumped 1.8v into it, its hardly Gigabyte's fault its wrecked.
 

miahallen

New Member
Joined
Apr 12, 2006
Messages
133 (0.02/day)
System Name MAX11L
Processor i5 750 @ 4.2GHz
Motherboard Gigabyte H55N-USB3
Cooling Corsair H70
Memory Corsair Dominator GTX3 @ DDR3-2100 6-9-6 1T
Video Card(s) eVGA 480 GTX @ 800/1000
Storage 80GB Intel X25M + 500GB Seagate Momentus XT
Case Silverstone SUGO SG05
Audio Device(s) onboard
Power Supply Silverstone ST45SF 450W SFX
Software Windows 7 x64
Benchmark Scores Check full performance review here: http://www.techreaction.net/2010/09/24/gaming-in-tight-spaces-p
The boards I get from Gigabyte are mine for keeps....
I don't think the boards have been available long enough to have sent them to other reviewers before me....but I don't know that for fact.
 

HillBeast

New Member
Joined
Jan 16, 2010
Messages
407 (0.08/day)
Location
New Zealand
System Name Kuja
Processor Intel Core i7 930
Motherboard Gigabyte X58A-UD3R
Cooling Corsair H50 HB.o Special Edition with Koolance CHC-122 NB Block
Memory OCZ Extreme Edition 4GB Dual Channel
Video Card(s) Sapphire Radeon 5870 Vapor-X Rev. 2
Storage 2x 1TB WD Green in RAID
Display(s) BenQ V2400W
Case Lian Li PC-A17 HB.o Special Edition
Audio Device(s) Onboard Realtek 889A
Power Supply Gigabyte Odin Pro 800W
Software Windows 7 Professional
Benchmark Scores 93632 sysPoints in sysTest '09 47 FPS in Star Tales Benchmark
You can go on about your 1366 being so much more extreme than my 1156, but when my 1156 is outperforming your 1366 for half the price it doesn't really hold up.;)

Pics or it didn't happen.
 
Joined
Apr 4, 2008
Messages
4,686 (0.80/day)
System Name Obelisc
Processor i7 3770k @ 4.8 GHz
Motherboard Asus P8Z77-V
Cooling H110
Memory 16GB(4x4) @ 2400 MHz 9-11-11-31
Video Card(s) GTX 780 Ti
Storage 850 EVO 1TB, 2x 5TB Toshiba
Case T81
Audio Device(s) X-Fi Titanium HD
Power Supply EVGA 850 T2 80+ TITANIUM
Software Win10 64bit
Glad I'm on 1366. That's all I have to say. Oh and 1156/1155 fanbois who flame me saying 'OH IT WAS JUST A FEW BOARDS THAT DID IT! 1156/1155 IS STILL GOOD!!1one'. STFU. Your socket is for mainstream. Stop trying to use it for high end. Get 1366 and stop being a cheapskate.

Yeah, I'm sure all the 5Ghz sandybridge chips out there are trembling in their boots from fear of your old hot and hungry 1366.
 

HillBeast

New Member
Joined
Jan 16, 2010
Messages
407 (0.08/day)
Location
New Zealand
System Name Kuja
Processor Intel Core i7 930
Motherboard Gigabyte X58A-UD3R
Cooling Corsair H50 HB.o Special Edition with Koolance CHC-122 NB Block
Memory OCZ Extreme Edition 4GB Dual Channel
Video Card(s) Sapphire Radeon 5870 Vapor-X Rev. 2
Storage 2x 1TB WD Green in RAID
Display(s) BenQ V2400W
Case Lian Li PC-A17 HB.o Special Edition
Audio Device(s) Onboard Realtek 889A
Power Supply Gigabyte Odin Pro 800W
Software Windows 7 Professional
Benchmark Scores 93632 sysPoints in sysTest '09 47 FPS in Star Tales Benchmark
Yeah, I'm sure all the 5Ghz sandybridge chips out there are trembling in their boots from fear of your old hot and hungry 1366.

LGA2011. Durr.

EDIT: Also you're bashing 1366 when your system has a 1366 CPU.
 

DrPepper

The Doctor is in the house
Joined
Jan 16, 2008
Messages
7,482 (1.26/day)
Location
Scotland (It rains alot)
System Name Rusky
Processor Intel Core i7 D0 3.8Ghz
Motherboard Asus P6T
Cooling Thermaltake Dark Knight
Memory 12GB Patriot Viper's 1866mhz 9-9-9-24
Video Card(s) GTX470 1280MB
Storage OCZ Summit 60GB + Samsung 1TB + Samsung 2TB
Display(s) Sharp Aquos L32X20E 1920 x 1080
Case Silverstone Raven RV01
Power Supply Corsair 650 Watt
Software Windows 7 x64
Benchmark Scores 3DMark06 - 18064 http://img.techpowerup.org/090720/Capture002.jpg

HillBeast

New Member
Joined
Jan 16, 2010
Messages
407 (0.08/day)
Location
New Zealand
System Name Kuja
Processor Intel Core i7 930
Motherboard Gigabyte X58A-UD3R
Cooling Corsair H50 HB.o Special Edition with Koolance CHC-122 NB Block
Memory OCZ Extreme Edition 4GB Dual Channel
Video Card(s) Sapphire Radeon 5870 Vapor-X Rev. 2
Storage 2x 1TB WD Green in RAID
Display(s) BenQ V2400W
Case Lian Li PC-A17 HB.o Special Edition
Audio Device(s) Onboard Realtek 889A
Power Supply Gigabyte Odin Pro 800W
Software Windows 7 Professional
Benchmark Scores 93632 sysPoints in sysTest '09 47 FPS in Star Tales Benchmark
I think he's aware of the fact he has a 1366.

well duh, why can't he do that?

I'm not pointing out to him he has 1366, I'm pointing out it's stupid to be saying...

old hot and hungry 1366

...when you are running it yourself implying 1366 is a piece of garbage. 1366 is still the best platform for any CPU. Period. Until 2011 comes out, 1366 will remain the best. It has the best features, best performance, best overclocking, best reliability, best CPUs and most importantly: most pins meaning less chance for arcing because of people using mainstream to do high end stuff. Leave mainstream for mainstream. Buy 1366 if you want to overclock, and if you want to get bang for buck then why didn't you buy AMD? Lynnfield is only there to fill a market hole between Clarkdale and Bloomfield/Gulftown.
 

bear jesus

New Member
Joined
Aug 12, 2010
Messages
1,534 (0.31/day)
Location
Britland
System Name Gaming temp// HTPC
Processor AMD A6 5400k // A4 5300
Motherboard ASRock FM2A75 PRO4// ASRock FM2A55M-DGS
Cooling Xigmatek HDT-D1284 // stock phenom II HSF
Memory 4GB 1600mhz corsair vengeance // 4GB 1600mhz corsair vengeance low profile
Storage 64gb sandisk pulse SSD and 500gb HDD // 500gb HDD
Display(s) acer 22" 1680x1050
Power Supply Seasonic G-450 // Corsair CXM 430W
...when you are running it yourself implying 1366 is a piece of garbage. 1366 is still the best platform for any CPU. Period. Until 2011 comes out, 1366 will remain the best. It has the best features, best performance, best overclocking, best reliability, best CPUs and most importantly: most pins meaning less chance for arcing because of people using mainstream to do high end stuff. Leave mainstream for mainstream. Buy 1366 if you want to overclock, and if you want to get bang for buck then why didn't you buy AMD? Lynnfield is only there to fill a market hole between Clarkdale and Bloomfield/Gulftown.

Just because something is old and runs hot does not mean it is garbage but when when new mid range single threaded quad cores can trade blows with the old dual threaded 6 core then it's not exactly the best thing out there meaning your assertion of it being the best performance is flawed, the new cores can overclock to around or over 5ghz on air so by far the current best overclockers, reliability wise is there a reason why you think the new CPU's would be less reliable? and why do you think more pins decreases the risk of arcing? surly the more pins you have the higher the risk one of them could arc due to a bad contact? even though it was just caused by low quality sockets because of a company's bad product so hardly something to effect all boards with sockets from all company's.

People buy mainstream parts and push them because they can and they can handle it otherwise there would be a lot of unhappy members on here.
 

HillBeast

New Member
Joined
Jan 16, 2010
Messages
407 (0.08/day)
Location
New Zealand
System Name Kuja
Processor Intel Core i7 930
Motherboard Gigabyte X58A-UD3R
Cooling Corsair H50 HB.o Special Edition with Koolance CHC-122 NB Block
Memory OCZ Extreme Edition 4GB Dual Channel
Video Card(s) Sapphire Radeon 5870 Vapor-X Rev. 2
Storage 2x 1TB WD Green in RAID
Display(s) BenQ V2400W
Case Lian Li PC-A17 HB.o Special Edition
Audio Device(s) Onboard Realtek 889A
Power Supply Gigabyte Odin Pro 800W
Software Windows 7 Professional
Benchmark Scores 93632 sysPoints in sysTest '09 47 FPS in Star Tales Benchmark
Just because something is old and runs hot does not mean it is garbage but when when new mid range single threaded quad cores can trade blows with the old dual threaded 6 core then it's not exactly the best thing out there meaning your assertion of it being the best performance is flawed

http://www.anandtech.com/bench/Product/142?vs=192 <- Need I say more? It isn't trading blows. It's not even close. Also I never said old and hot = garbage, I said he implied it.

the new cores can overclock to around or over 5ghz on air so by far the current best overclockers

http://www.techpowerup.com/forums/showthread.php?t=118081 <- Um yeah. 5GHz...

reliability wise is there a reason why you think the new CPU's would be less reliable?

Socket Pin Burnout Returns to Haunt LGA1155? - Pa... <- You're looking at it.


and why do you think more pins decreases the risk of arcing? surly the more pins you have the higher the risk one of them could arc due to a bad contact?

I am going to assume you never learnt about electronics before? The more contacts, the less resistance something has. It's common sense. If you have two pipes feeding a house with water, it's not going to be as good as three pipes. Two pipes will need to feed more water in and it is more strain on the pipes. Do I need to pull up Wikipedia to prove this?

even though it was just caused by low quality sockets because of a company's bad product so hardly something to effect all boards with sockets from all company's.

But this is the bad press and bad press sticks. I don't recall seeing anywhere near as much bad press about 1366 arcing as 1156 or 1155 have, let alone at all. I'm probably wrong on that one though because Google can be unreliable.

People buy mainstream parts and push them because they can and they can handle it otherwise there would be a lot of unhappy members on here.

Or people could stop being cheapskates, pay more and not whinge when it craps out because it is much higher quality.
 

Frick

Fishfaced Nincompoop
Joined
Feb 27, 2006
Messages
18,914 (2.86/day)
Location
Piteå
System Name Black MC in Tokyo
Processor Ryzen 5 5600
Motherboard Asrock B450M-HDV
Cooling Be Quiet! Pure Rock 2
Memory 2 x 16GB Kingston Fury 3400mhz
Video Card(s) XFX 6950XT Speedster MERC 319
Storage Kingston A400 240GB | WD Black SN750 2TB |WD Blue 1TB x 2 | Toshiba P300 2TB | Seagate Expansion 8TB
Display(s) Samsung U32J590U 4K + BenQ GL2450HT 1080p
Case Fractal Design Define R4
Audio Device(s) Line6 UX1 + some headphones, Nektar SE61 keyboard
Power Supply Corsair RM850x v3
Mouse Logitech G602
Keyboard Cherry MX Board 1.0 TKL Brown
VR HMD Acer Mixed Reality Headset
Software Windows 10 Pro
Benchmark Scores Rimworld 4K ready!
Or people could stop being cheapskates, pay more and not whinge when it craps out because it is much higher quality.

Wow, have you been in contact with humanity lately? :laugh:
 
Top