• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Clean thermal Paste from PCB around ATI die???

Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
So I was messing around with an old card of mine.... and was putting on some new TIM. When while cleaning off the old stuff.... I got a big goober of it on the PCB surrounding the die it's self. I tried gently with a tissue to get it off but because this stuff is so crappy I had no success.

Any safe ways to get clean it from around there with causing any damage to it? I will show you a generic pic of where I am talking about.

 

Attachments

  • his-4870-chip (1).jpg
    his-4870-chip (1).jpg
    159.6 KB · Views: 3,127
Joined
Mar 26, 2008
Messages
1,877 (0.32/day)
Location
Cobourg,Ontario
System Name RyZen FX
Processor AMD Ryzen 9 5900x
Motherboard Gigabyte B550 Aorus Elite AX V2
Cooling DeepCool AK400 Zero Dark Plus
Memory Corsair CMK32GX4M2E3200C16 X2 32gig dual channel
Video Card(s) ASUS RX 7700XT TUF OC
Storage x2 Lexar SSD NM710 2TB 2XSeagate 1Terrabyte 1x Seagate 2 Terrabyte
Display(s) 40 Inch Samsung HDTV (monitor)
Case HAF-X:)
Audio Device(s) AMD/HDMI to Onkyo HT-R508 Receiver
Power Supply EVGA SuperNOVA 1000 G2 Power Supply
Software Windows 10 Pro X64
rubbing alcohol,try some q tips to get in between the resistors.Or try soaking it in a bath of alcohol.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Thanks Guys will doo.....
 
Joined
Oct 16, 2009
Messages
510 (0.10/day)
Location
UK South
System Name AMD FX
Processor AMD FX 8350 @ 4.8Ghz
Motherboard Asus Sabretooth 990FX R2.0
Cooling Corsair H100
Memory 16GB Corsair Vegance 1866
Video Card(s) AMD HD7970 Gigabyte
Storage Sandisk Extreme SSD, 500gb SG Sata
Display(s) Samsung 2333sw
Case HAF 922
Audio Device(s) Realtek HD Audio
Power Supply Thermaltake Toughpower 750w
Software Windows 10 Professional x64
i always us rubbing alcohol and baby buds as well to get into the tricky bits use a soft small paint brush
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Paint brush idea is a great idea too!
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Quick double post I was looking around the house and came across this.... Would this be safe you think???

 

Attachments

  • IMG_2719.jpg
    IMG_2719.jpg
    197 KB · Views: 2,014
Joined
Oct 6, 2005
Messages
10,242 (1.51/day)
Location
Granite Bay, CA
System Name Big Devil
Processor Intel Core i5-2500K
Motherboard ECS P67H2-A2
Cooling XSPC Rasa | Black Ice GT Stealth 240 | XSPC X2O 750 | 2x ACF12PWM | PrimoChill White 7/16"
Memory 2x4GB Corsair Vengeance LP Arctic White 1600MHz CL9
Video Card(s) EVGA GTX 780 ACX SC
Storage Intel 520 Series 180GB + WD 1TB Blue
Display(s) HP ZR30W 30" 2650x1600 IPS
Case Corsair 600T SE
Audio Device(s) Xonar Essence STX | Sennheisser PC350 "Hero" Modded | Corsair SP2500
Power Supply ABS SL 1050W (Enermax Revolution Rebadge)
Software Windows 8.1 x64 Pro w/ Media Center
Benchmark Scores Ducky Year of the Snake w/ Cherry MX Browns & Year of the Tiger PBT Keycaps | Razer Deathadder Black
That should work just fine. Normally, you would want the highest concentration of alcohol available as it does evaporate much faster, but just let your card sit sans cooler for an hour or so to ensure everything has dried before reassembly and you should be good!
 
Joined
Oct 16, 2009
Messages
510 (0.10/day)
Location
UK South
System Name AMD FX
Processor AMD FX 8350 @ 4.8Ghz
Motherboard Asus Sabretooth 990FX R2.0
Cooling Corsair H100
Memory 16GB Corsair Vegance 1866
Video Card(s) AMD HD7970 Gigabyte
Storage Sandisk Extreme SSD, 500gb SG Sata
Display(s) Samsung 2333sw
Case HAF 922
Audio Device(s) Realtek HD Audio
Power Supply Thermaltake Toughpower 750w
Software Windows 10 Professional x64
that will be fine, should have enough left for another time as well..hehehe
 

W1zzard

Administrator
Staff member
Joined
May 14, 2004
Messages
27,049 (3.71/day)
Processor Ryzen 7 5700X
Memory 48 GB
Video Card(s) RTX 4080
Storage 2x HDD RAID 1, 3x M.2 NVMe
Display(s) 30" 2560x1600 + 19" 1280x1024
Software Windows 10 64-bit
for my review images i use only Q-Tips without any liquid

and a shaving brush to get dust off
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
that will be fine, should have enough left for another time as well..hehehe

Yeah maybe it will be cutting it close Hehehe:roll:

for my review images i use only Q-Tips without any liquid

and a shaving brush to get dust off

Thanx Wizz.... I know this might be a stupid question.... but a soft bristled tooth brush may be okay???
 

marvelous211

New Member
Joined
Jun 4, 2008
Messages
147 (0.03/day)
Location
US East Coast
Processor i3 530 @ 4.3ghz
Motherboard ASUS P7H55D-M EVO
Cooling Xigmatek 1283 120mm fan
Memory G.SKILL Ripjaws F3-12800CL9D-4GBRL
Video Card(s) XFX 5850 @ 875/1150
Storage WD BLUE 640GB, Hitachi 1 tera
Display(s) Asus VH226 21.5" LCD 1920x1080
Case Antec 200
Audio Device(s) Creative X-fi
Power Supply Antec Neo 650
Software Win 7 64 ultimate
I use arctic clean myself but yeah you can use Isopropyl alcohol aka rubbing alcohol. It just won't do as good job as Arctic Clean.
 
Joined
Jun 12, 2007
Messages
4,815 (0.78/day)
Location
Wangas, New Zealand
System Name Darth Obsidious
Processor Intel i5 2500K
Motherboard ASUS P8Z68-V/Gen3
Cooling Cooler Master Hyper 212+ in Push Pull
Memory 2X4GB Corsair Vengeance DDR3 1600
Video Card(s) ASUS R9 270x TOP
Storage 128GB Samsung 830 SSD, 1TB WD Black, 2TB WD Green
Display(s) LG IPS234V-PN
Case Corsair Obsidian 650D
Audio Device(s) Infrasonic Quartet
Power Supply Corsair HX650w
Software Windows 7 64bit and Windows XP Home
Benchmark Scores 2cm mark on bench with a razor blade.
This is what I use often to get thermal paste off in most situations.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
Thanks To all you guys... I think that is what I will do use a tooth brush and some alcohol.
 
Joined
Sep 4, 2009
Messages
974 (0.18/day)
System Name Grond
Processor Ryen 5 3600x PBO ~ 4.4GHz / fabric at 1900
Motherboard MSI b550 Tomahawk
Cooling XSPC Raystorm CPU w/ am4 mounting bracket+ 2 RX360 radiator + xspc Razor R9-290 w/ backplate
Memory 32gb Crucial Ballistix @ 3800
Video Card(s) XFX R9 290 w/ XSPC Razor full cover block and backplate
Storage WD SN850 1tb-OS, SN750 1tb, Samsung 860 Evo 1tb, WD blue hdd 4tb
Display(s) Samsung 23" 120hz 3d LCD w/ 3d glasses, using 'lightboost' trick
Case NZXT H630 white watercooling case
Audio Device(s) Onboard realtek ALC 1200+ Sennheiser HD 598
Power Supply XFX Pro 850 XXX semi-modular
Mouse Logitech G703 Wireless
Keyboard Steelseries 6 v2
Software Windows 10 Pro (Had some mystery error on Win7 and decided to go W10)
As rickss69 said, toothbrush and Isopropyl work wonders. Plus, if you're clumsy like me and always cut yourself when doing mods, you have some rubbing alcohol at hand to clean your cuts too! :)
 
Top