- Joined
- Sep 14, 2006
- Messages
- 664 (0.10/day)
- Location
- QLD, Australia
| Processor | Ryzen 9 7950X3D |
|---|---|
| Motherboard | Asus ROG X670E GENE MATX |
| Cooling | Phanteks Glacier One 280MPH AIO |
| Memory | G.Skill 48GB (2x24GB) F5-8000J4048F24GX2-TZ5RK Trident Z5 RGB 8000MHz DDR5 |
| Video Card(s) | ASUS TUF Gaming Radeon RX 7900 XTX OC Edition 24GB GDDR6 |
| Storage | Crucial T700 Gen5 2TB NVMe | Crucial P5 Plus Gen4 2TB NVMe | Crucial P5 Plus Gen4 1TB NVMe |
| Display(s) | AOC U3277PWQU 32in 4K |
| Case | Phanteks Enthoo Evolv mATX TG |
| Audio Device(s) | Onboard SPDIF --> Logitech Z-5500 |
| Power Supply | Seasonic ATX 3.0 VERTEX-GX-1000 |
| Mouse | Razer Mamba Chroma |
| Keyboard | Razer Cynosa V2 Chroma |
| Software | W11 Pro 64 bit |
To view this case mod, go here.
Specs:
Obsidian 800d, X58 Sabertooth, i7 980x, SLI 580GTX, Corsair 12GB Dominator, OCZ Vertex 2 80GB + WD Caviar Black 1TB. Corsair AX1200, XSPC RX360 Radiator (TOP), EK-CoolStream RAD XT 240 (BOTTOM), 5ea x D12SL-12 Yate Loon 120mm, XSPC Acrylic Dual 5.25” Bay Reservoir, Laing D5 Pump, EK-Supreme HF Acetal+Nickel, 2ea x EK-FC580 GTX Acetal Nickel, EK-FC Bridge DUAL Parallel links, Tygon ½” Tubing,Bitspower ½” barbs, Distilled water, Windows Ultimate 64
Mods:
Removed bottom drive cage, custom installed bottom 240 rad, cut exhaust hole in side panel and install vent grill. General cable/tubing management. Loop: Res/Pump --> 360 Rad --> CPU --> 240 Rad --> GPU 1&2 --> Res/Pump
Initially attempted to hard tube with stainless 3/8" Link: http://www.techpowerup.com/forums/showthread.php?t=140548. Although the tube bending was actually working out as planned, the rigidity of the tube placed to much pressure on the rads and water blocks, hence why the attempt was abandoned. Flexible tubing in the end proved a better choice.
Specs:
Obsidian 800d, X58 Sabertooth, i7 980x, SLI 580GTX, Corsair 12GB Dominator, OCZ Vertex 2 80GB + WD Caviar Black 1TB. Corsair AX1200, XSPC RX360 Radiator (TOP), EK-CoolStream RAD XT 240 (BOTTOM), 5ea x D12SL-12 Yate Loon 120mm, XSPC Acrylic Dual 5.25” Bay Reservoir, Laing D5 Pump, EK-Supreme HF Acetal+Nickel, 2ea x EK-FC580 GTX Acetal Nickel, EK-FC Bridge DUAL Parallel links, Tygon ½” Tubing,Bitspower ½” barbs, Distilled water, Windows Ultimate 64
Mods:
Removed bottom drive cage, custom installed bottom 240 rad, cut exhaust hole in side panel and install vent grill. General cable/tubing management. Loop: Res/Pump --> 360 Rad --> CPU --> 240 Rad --> GPU 1&2 --> Res/Pump
Initially attempted to hard tube with stainless 3/8" Link: http://www.techpowerup.com/forums/showthread.php?t=140548. Although the tube bending was actually working out as planned, the rigidity of the tube placed to much pressure on the rads and water blocks, hence why the attempt was abandoned. Flexible tubing in the end proved a better choice.
Last edited by a moderator:
