The AMD Phenom II OC'ers Club

jeepdriver · Jul 25, 2011

PotatoCat said:
not really, i applied a small dab on the CPU then i used a credit card to put little bits of TIM on the gaps between the nickel plate and the heat pipe. my ambient temps are about 33-34.

Looks like your ambient is fairly warm. How's the airflow in your case ?

PotatoCat · Jul 25, 2011

jeepdriver said:
Looks like your ambient is fairly warm. How's the airflow in your case ?

i have a Cooler Master CM690II placed on top of my PC table, i also added an extra intake fan in the bottom of the chassis

Chicken Patty · Jul 25, 2011

PotatoCat said:
i have a Cooler Master CM690II placed on top of my PC table, i also added an extra intake fan in the bottom of the chassis

At least my case has terrific airflow, I don't even have a fan on the bottom.

de.das.dude · Jul 26, 2011

erocker said:
Then it's unstable. Your mobo temp sensor is probablly stuck, nothing to worry about.

no its move from 57C to 63C
i think i need to realign the cooler i facricated.

p_o_s_pc · Jul 26, 2011

What is the max SAFE 24/7 crunching voltage you guys would feed a PII 955 BE and a AII X4 630
both of them on a Xiggy S1283 with AS5?

right now the PII is running 1.4v @3520mhz and the AII is 3500mhz@1.37v
I think its the board that is holding the PII back so much.
PII is 47c 100% load
AII is 43c 100 load

de.das.dude · Jul 26, 2011

FINALLY GOT MY STICKS RUNNING IN DUAL CHANNEL!!!

i found out the mounting system had gotten crooked so it was showing high temps.
i have put 1.45V on the NB
and NB is at 2650GHz!

YAY! DUAL CHANNEL DDR2!!!

JrRacinFan · Jul 26, 2011

Found out Core 3 on my chip is a sucky overclocker.

Takes ~1.38v when on all 4 cores.

p_o_s_pc said:
What is the max SAFE 24/7 crunching voltage you guys would feed a PII 955 BE and a AII X4 630
both of them on a Xiggy S1283 with AS5?

right now the PII is running 1.4v @3520mhz and the AII is 3500mhz@1.37v
I think its the board that is holding the PII back so much.
PII is 47c 100% load
AII is 43c 100 load

You can go up a little in clock speed, that PII should be hitting ~3.8Ghz @ 1.4v. Athlon II is going to be a bit more board dependent but should be able to obtain about 3.65-7. Temps are fine.

de.das.dude said:
FINALLY GOT MY STICKS RUNNING IN DUAL CHANNEL!!!

i found out the mounting system had gotten crooked so it was showing high temps.
i have put 1.45V on the NB
and NB is at 2650GHz!

YAY! DUAL CHANNEL DDR2!!!

Congrats! What's the load temps like?

de.das.dude · Jul 26, 2011

this should answer you question

JrRacinFan · Jul 26, 2011

So I'm guessing a little over 50C, which isn't great but not horrible either.

de.das.dude · Jul 26, 2011

JrRacinFan said:
So I'm guessing a little over 50C, which isn't great but not horrible either.

AMBIENT IS 37C, whatcha expect.

JrRacinFan · Jul 26, 2011

de.das.dude said:
AMBIENT IS 37C, whatcha expect.

Very high compared to my 18C air conditioned ambient

de.das.dude · Jul 26, 2011

and CPU temps is max 49C not even 50!

and i would get an AC too. gets 45C inside during may. but my parents dont have enough money, and im just a student.

texaschainsaw01 · Jul 26, 2011

AMD 955BE 4.0Ghz
AsRock 890GX Extreme 3
8GB Corsair RAM
XFX HD5770 XXX Edition
NZXT Guardian 921RB
Coolit ALC Vantage
LG 42" HD LCD Monitor
Sony MU-TE-KI 7.2 Surround Sound

all this equals one awesome system and looking to upgrading Graphics Card to either HD6770 in Crossfire or a XFX Radeon HD 6950 2GB in the near future

http://valid.canardpc.com/show_oc.php?id=1924999

Uploaded with ImageShack.us

MilkyWay · Jul 27, 2011

Whats the benefits of a higher CPU/NB speed. I have mine set too 2600mhz 1.375v is there any reason why i would want to go higher? I know it helps with memory bandwidth.

EDIT: texaschainsaw01 thats nice voltage at 4ghz.

JrRacinFan · Jul 27, 2011

MilkyWay said:
Whats the benefits of a higher CPU/NB speed. I have mine set too 2600mhz 1.375v is there any reason why i would want to go higher? I know it helps with memory bandw)T: texaschainsaw01 thats nice voltage at 4ghz.

helps scaling and min fps on multi gpu configurations

PotatoCat · Jul 27, 2011

Chicken Patty said:
At least my case has terrific airflow, I don't even have a fan on the bottom.

i heard this case has great airflow thats why i bought it, i really dont know the reason why my temps are this high... tomorrow i'll take off the cooler clean it up and reapply some TIM and i'll see what happens.

Chicken Patty · Jul 27, 2011

PotatoCat said:
i heard this case has great airflow thats why i bought it, i really dont know the reason why my temps are this high... tomorrow i'll take off the cooler clean it up and reapply some TIM and i'll see what happens.

A lot of times bad contact, poorly applied TIM are the issues. Keep us posted.

YautjaLord · Jul 27, 2011

PotatoCat said:
i heard this case has great airflow thats why i bought it, i really dont know the reason why my temps are this high... tomorrow i'll take off the cooler clean it up and reapply some TIM and i'll see what happens.

Chicken Patty said:
A lot of times bad contact, poorly applied TIM are the issues. Keep us posted.

What Patty said + check ambient room temp & also tell what revision your CPU is (C2/C3/etc..., mine C3), what TDP (140/125W) & what TIM you use; Xiggy is great CPU HSF developer, if it has mirror finish the better, but if your ambient room temp doesn't allow too much of OC try either to lower it (unlikely though, seeing as my 965BE OC'd to 4.0GHz & idle temp under AS5/VenomousX combo runs like charm & doesn't overheat that much) or try to see what frequencies/voltages you set too high. Or better show your CPU-Z dump, that way the i'll know what you tweaked or not.

texaschainsaw01 · Jul 27, 2011

Hey everyone again lolz

this is my setup lol i told ya what i have now let me show you my setup

www.ragencomputers.yolasite.com

sorry bout the mess lol 4 kids and work not a real great deal of free time

texaschainsaw01 · Jul 27, 2011

JrRacinFan said:
Found out Core 3 on my chip is a sucky overclocker.
http://img.techpowerup.org/110726/Capture073.jpg

Takes ~1.38v when on all 4 cores.

You can go up a little in clock speed, that PII should be hitting ~3.8Ghz @ 1.4v. Athlon II is going to be a bit more board dependent but should be able to obtain about 3.65-7. Temps are fine.

Congrats! What's the load temps like?

hey just wondering what board you are using what tyoe of cooling etc to hit 4.0ghz try dropping the fsb down to a even 200mhz put volts to 1.4 then step up your multiplier to hit 4.0ghz look futher down the page to see what my system runs at and try and match to roughly that

ps only try hitting 4ghz with water cooling

JrRacinFan · Jul 27, 2011

texaschainsaw01 said:
hey just wondering what board you are using what tyoe of cooling etc to hit 4.0ghz try dropping the fsb down to a even 200mhz put volts to 1.4 then step up your multiplier to hit 4.0ghz look futher down the page to see what my system runs at and try and match to roughly that

ps only try hitting 4ghz with water cooling

H50 and can only do 4Ghz with core 3 disabled @ 1.41v otherwise, ~1.48v-1.5v but then the chip gets too hot for my liking. Board in question is a Gigabyte ma790x-ud4p. Thanks for trying to help but even it locked and stock(3.2Ghz) is "enough" for my needs. I just like to play with low/mid range hardware. I get a max load temp of ~38C with an ambient of ~19C at 3.8Ghz tri.

texaschainsaw01 · Jul 27, 2011

JrRacinFan said:
H50 and can only do 4Ghz with core 3 disabled @ 1.41v otherwise, ~1.48v-1.5v but then the chip gets too hot for my liking. Board in question is a Gigabyte ma790x-ud4p. Thanks for trying to help but even it locked and stock(3.2Ghz) is "enough" for my needs. I just like to play with low/mid range hardware. I get a max load temp of ~38C with an ambient of ~19C at 3.8Ghz tri.

thats a really good temp at full load lol i have a gigabyte board in the wifes pc with a 555be and i cant unlock the cores put that same chip into my asrock board and unlocks first go lol so far i have found that unlocking and ocing on gigabyte boards suck lol if your ale to get your hands on a asrock board and trying again lolz the board i use is the asrock 890gx extreme3 you can bet them for about 130 bucks my system build has only cost me about 1100 bucks all up and have a great rig

JrRacinFan · Jul 28, 2011

Migrating to an m5a97 soon.

PotatoCat · Jul 28, 2011

YautjaLord said:
Or better show your CPU-Z dump, that way the i'll know what you tweaked or not.

like this??
http://valid.canardpc.com/show_oc.php?id=1927051

texaschainsaw01 · Jul 28, 2011

PotatoCat said:
like this??
http://valid.canardpc.com/show_oc.php?id=1927051

lol hope your not running this all the time lolz ok first up your voltage to 1.3 then your multiplier to 16 and that will clock you too 3.2ghz if your aiming for 4ghz you will need a multiplier of 20 but your gonna want to do it in small increments at a time but firstly do you have watercooling coz atm from your screen dump i havent seen a pc running those specs in over 15 years lol

ps sorry for any spelling mistakes im on my mobile

Processor	HTPC: 965BE 3.7GHz - Main Rig: FX-8150 3.6GHz
Motherboard	ASUS M4A79 Deluxe - AsRock 990FX Killer
Cooling	Arctic - Heatkiller/XSPC
Memory	8 gig GSkill 1066 - 8 gig Team Vulcan
Video Card(s)	HIS 4670 - XFX R7 260X
Storage	1TB Samsung&2 WD 500GB - 250GB EVO SSD,WD 500GB, WD 640GB
Display(s)	Toshiba 32" TV - Planar PX2710MW
Case	Fractal Node 605 - Fractal Arc Midi R2 candy apple red over gold metallic
Audio Device(s)	onboard - onboard
Power Supply	PC power&cooling 750w - PC Power&Cooling 600w
Mouse	Mini keyboard w/trackball - Intellimouse from Alienware (2002)
Keyboard	Mini keyboard w/trackball - Antec
Software	Win 7 Ult.SP1 - Ultimate Edition 4.2

System Name	MAH PC
Processor	AMD Phenom II 965 @ 3.6GHz
Motherboard	AsRock 870 Extreme3
Cooling	Xigmatek Gaia w/ 2 GELID Silent Fans
Memory	4x2GB G.skill Ripjaws @ 800MHz (9-9-9-24)
Video Card(s)	XFX 6870 1GB Dual-Fan Black Edition
Storage	Samsung Spinpoint F3 1TB
Display(s)	SCEPTRE X9WG-NagaV 1440x900
Case	Cooler Master
Audio Device(s)	Onboard 7.1 w/ Creative SoundBlaster X-Fi MB TRIAL
Power Supply	Seasonic M12II 620W
Software	Windows 7 Home Premium

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS ROG Crosshair X670E Hero
Cooling	ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans
Memory	G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s)	ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage	Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s)	SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh WQHD Computer Monitor
Case	Phanteks NV7
Power Supply	Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0
Software	Windows 11 Pro

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Dual Build Streamer
Processor	Ryzen 7900x3d : Ryzen 4600G
Motherboard	AsRock B650E Steel Legend : Giga B450i Aorus
Cooling	Custom Water 1x420 : Stock
Memory	32GB T-Force Deltas : 16GB Dominator Platinums
Video Card(s)	PowerColor 7900 XTX Liquid Devil: iGPU
Storage	20+ TB
Display(s)	Sammy 49" 5k Ultrawide
Case	Custom White Painted Phanteks Enthoo Pro 2
Audio Device(s)	Onboard : Onboard
Power Supply	EVGA 1200W P2
Mouse	Corsair M65 RGB Elite White
Keyboard	Hyperx Origins 65
Software	Windows 10

System Name	BLOODY BIG RIG
Processor	AMD 955 BE 4.0Ghz
Motherboard	AsRock 890GX Extreme3
Cooling	Coolit ALC Vantage
Memory	8GB Corsair
Video Card(s)	VTX3D HD6950 2GB
Storage	3TB Western Digital
Display(s)	LG 42"LCD HD
Case	NZXT Guardian 921RB
Power Supply	Antec 700W
Software	Windows 7 64Bit Ultimate
Benchmark Scores	23697 3D Mark Score Average FPS 156 Max FPS 328

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

The AMD Phenom II OC'ers Club

New Member

Pro Indian Modder

F@H&WCG addict

Pro Indian Modder

Served 5k and counting ...

Pro Indian Modder

Served 5k and counting ...

Pro Indian Modder

Served 5k and counting ...

Pro Indian Modder

New Member

Served 5k and counting ...

New Member

New Member

New Member

Served 5k and counting ...

New Member

Served 5k and counting ...

New Member

New Member