POGE
New Member
- Joined
- Oct 28, 2005
- Messages
- 1,585 (0.23/day)
- Location
- In banjo's Goats.
Processor | Turion 64 ML-34 1.8Ghz |
---|---|
Motherboard | Compaq Laptop Mobo |
Cooling | Stock Compaq Laptop Fan |
Memory | 1x 256 DDR333 |
Video Card(s) | Radeon 200m |
Storage | 40GB 5200RPM HP |
Display(s) | Stock Laptop LCD |
Case | Laptop Case |
Audio Device(s) | Onboard Realtek |
Power Supply | Stock Laptop Powerbrick |
Software | Windows XP Pro |
So I'm using a Single Stage phase cooling unit and giving my 2600k (overclocked to 5.6ghz) quite a bit of voltage (5.30 with 100% LLC) and when I power up the system most of the time it tries to start, fans spin up, and then after about 10 seconds it shuts down and restarts itself, and it does this over and over and eventually it starts up just fine and boots totally stable into windows and is even prime stable. Sometimes I'm lucky and it starts flawlessly on the first cycle but other times it has to turn itself on and off 4 or 5 times before booting which is very annoying and frustrating. I'm clueless on whats going on.
This is the thread discussing the project:
http://www.techpowerup.com/forums/showthread.php?t=149938
This is the thread discussing the project:
http://www.techpowerup.com/forums/showthread.php?t=149938