• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Need to open a stripped screw

xbonez

New Member
Joined
Nov 29, 2010
Messages
1,182 (0.24/day)
Location
Philly, PA (US)
System Name Winter
Processor AMD Phenom II x4 965 BE @ 4.0Ghz
Motherboard MSI 790FX-GD70
Cooling Corsair H50 Liquid Cooling
Memory 2 x 2Gb Gskill Ripjaws 1600Mhz (7-7-7-24@1.6V)
Video Card(s) Asus GTX 470 @ Stock (Zalman VF3000 cooler)
Storage 2 x Samsung Spinpoint F3 500GB (RAID 0)
Display(s) Hanns G 28" @ 1920x1200
Case Antec 1200
Audio Device(s) Onboard -- TosLink --> Z5500
Power Supply Corsair 850TX 850W PSU
Software Win 7 64-bit Ultimate
I need to get my optical disk drive out, but 2 of the 4 screws that hold it to my Antec 1200 are stripped pretty bad. What are my options?

I'd prefer a solution that doesn't need a drill for the simple fact that I don't have one easily available.
Would super-gluing a screwdriver to the screw work?

The screws are not only stripped but also screwed in pretty tight.
They don't have a head large enough for pliers to get a grip.
 
Joined
Sep 25, 2006
Messages
2,312 (0.36/day)
Location
Norn Iron
Processor Q9550 @3.8
Motherboard Asus Maximus Extreme
Cooling Custom water cooling
Memory 4GB Patriot Viper DDR3 1600MHz
Video Card(s) 2x HD4870 512MB
Storage 2x 500GB
Display(s) 3x LG L226WTQ 22" Widescreen LCD
Case Modded TJ07
Audio Device(s) On board
Power Supply PC P&C Silencer 750
Software Windows 7 Ultimate
Maybe, try getting a small flat head screwdriver into one of the slots on the screw, at an angle.

Then tap the screwdriver with a small hammer, in an anticlockwise direction.

EDIT: Or you could use a hacksaw blade to cut a new slot, in the head of the screw, for the screwdriver to fit into.
 

xbonez

New Member
Joined
Nov 29, 2010
Messages
1,182 (0.24/day)
Location
Philly, PA (US)
System Name Winter
Processor AMD Phenom II x4 965 BE @ 4.0Ghz
Motherboard MSI 790FX-GD70
Cooling Corsair H50 Liquid Cooling
Memory 2 x 2Gb Gskill Ripjaws 1600Mhz (7-7-7-24@1.6V)
Video Card(s) Asus GTX 470 @ Stock (Zalman VF3000 cooler)
Storage 2 x Samsung Spinpoint F3 500GB (RAID 0)
Display(s) Hanns G 28" @ 1920x1200
Case Antec 1200
Audio Device(s) Onboard -- TosLink --> Z5500
Power Supply Corsair 850TX 850W PSU
Software Win 7 64-bit Ultimate
Hmm, thanks. I'll give it a shot right now.
 
Joined
Sep 25, 2006
Messages
2,312 (0.36/day)
Location
Norn Iron
Processor Q9550 @3.8
Motherboard Asus Maximus Extreme
Cooling Custom water cooling
Memory 4GB Patriot Viper DDR3 1600MHz
Video Card(s) 2x HD4870 512MB
Storage 2x 500GB
Display(s) 3x LG L226WTQ 22" Widescreen LCD
Case Modded TJ07
Audio Device(s) On board
Power Supply PC P&C Silencer 750
Software Windows 7 Ultimate
If it dosn't work try the method in my edit.
 

xbonez

New Member
Joined
Nov 29, 2010
Messages
1,182 (0.24/day)
Location
Philly, PA (US)
System Name Winter
Processor AMD Phenom II x4 965 BE @ 4.0Ghz
Motherboard MSI 790FX-GD70
Cooling Corsair H50 Liquid Cooling
Memory 2 x 2Gb Gskill Ripjaws 1600Mhz (7-7-7-24@1.6V)
Video Card(s) Asus GTX 470 @ Stock (Zalman VF3000 cooler)
Storage 2 x Samsung Spinpoint F3 500GB (RAID 0)
Display(s) Hanns G 28" @ 1920x1200
Case Antec 1200
Audio Device(s) Onboard -- TosLink --> Z5500
Power Supply Corsair 850TX 850W PSU
Software Win 7 64-bit Ultimate
The first method doesn't work. The head is too badly stripped.

I want to avoid a hacksaw since it will scratch the case pretty bad.
 
Joined
Sep 25, 2006
Messages
2,312 (0.36/day)
Location
Norn Iron
Processor Q9550 @3.8
Motherboard Asus Maximus Extreme
Cooling Custom water cooling
Memory 4GB Patriot Viper DDR3 1600MHz
Video Card(s) 2x HD4870 512MB
Storage 2x 500GB
Display(s) 3x LG L226WTQ 22" Widescreen LCD
Case Modded TJ07
Audio Device(s) On board
Power Supply PC P&C Silencer 750
Software Windows 7 Ultimate
You would need a small hacksaw blade to do it, and remove the blade from the saw.

If not, then getting the lend of a drill may be your best bet...
 
Joined
Jan 17, 2010
Messages
12,280 (2.36/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
Just slide a knife under the head and apply pressure upward and back it out with a screw driver

Its that wasy


Otherwise its the dremel tool

If it the head insert that is stripped then cut a slot in it with a Dremel tool
 

AsRock

TPU addict
Joined
Jun 23, 2007
Messages
18,875 (3.07/day)
Location
UK\USA
Processor AMD 3900X \ AMD 7700X
Motherboard ASRock AM4 X570 Pro 4 \ ASUS X670Xe TUF
Cooling D15
Memory Patriot 2x16GB PVS432G320C6K \ G.Skill Flare X5 F5-6000J3238F 2x16GB
Video Card(s) eVga GTX1060 SSC \ XFX RX 6950XT RX-695XATBD9
Storage Sammy 860, MX500, Sabrent Rocket 4 Sammy Evo 980 \ 1xSabrent Rocket 4+, Sammy 2x990 Pro
Display(s) Samsung 1080P \ LG 43UN700
Case Fractal Design Pop Air 2x140mm fans from Torrent \ Fractal Design Torrent 2 SilverStone FHP141x2
Audio Device(s) Yamaha RX-V677 \ Yamaha CX-830+Yamaha MX-630 Infinity RS4000\Paradigm P Studio 20, Blue Yeti
Power Supply Seasonic Prime TX-750 \ Corsair RM1000X Shift
Mouse Steelseries Sensei wireless \ Steelseries Sensei wireless
Keyboard Logitech K120 \ Wooting Two HE
Benchmark Scores Meh benchmarks.
Just slide a knife under the head and apply pressure upward and back it out with a screw driver

Its that wasy


Otherwise its the dremel tool

If it the head insert that is stripped then cut a slot in it with a Dremel tool

Yeah that some times works with the knife and as for the dremel hell that works for sure. But it be a good idea to strip the system before doing that due to metal flying every were. Even better if the dremel has a speed control too.
 
Joined
Jul 14, 2006
Messages
2,419 (0.37/day)
Location
People's Republic of America
System Name It's just a computer
Processor i9-14900K Direct Die
Motherboard MSI Z790 ACE MAX
Cooling Dual D5T Vario, XSPC BayRes, Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, IceMan DD block
Memory G.SKILL F5-7200J3646F24GX2-TZ5RK
Video Card(s) eVGA RTX2080 FTW3 Ultra
Storage Samsung 990 PRO 1TB M.2
Display(s) LG 32GK650F
Case Thermaltake Xaser VI
Audio Device(s) Auzentech X-Meridian 7.1 2G/Z-5500
Power Supply Seasonic Prime PX-1300
Mouse Logitech
Keyboard Logitech
Software Win11PRO

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,966 (1.12/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Joined
Jul 14, 2006
Messages
2,419 (0.37/day)
Location
People's Republic of America
System Name It's just a computer
Processor i9-14900K Direct Die
Motherboard MSI Z790 ACE MAX
Cooling Dual D5T Vario, XSPC BayRes, Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, IceMan DD block
Memory G.SKILL F5-7200J3646F24GX2-TZ5RK
Video Card(s) eVGA RTX2080 FTW3 Ultra
Storage Samsung 990 PRO 1TB M.2
Display(s) LG 32GK650F
Case Thermaltake Xaser VI
Audio Device(s) Auzentech X-Meridian 7.1 2G/Z-5500
Power Supply Seasonic Prime PX-1300
Mouse Logitech
Keyboard Logitech
Software Win11PRO
Joined
Jan 17, 2010
Messages
12,280 (2.36/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
O for gods sake. Yank that SOB out. And those extractors do need a hole to stick it in which would require a drill. But even so there to big for that screw. The smallest bolt they would work on would be a 1/4-20
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,746 (1.70/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
stick a flathead under the head of the screw and pry+turn
 

qubit

Overclocked quantum bit
Joined
Dec 6, 2007
Messages
17,865 (2.98/day)
Location
Quantum Well UK
System Name Quantumville™
Processor Intel Core i7-2700K @ 4GHz
Motherboard Asus P8Z68-V PRO/GEN3
Cooling Noctua NH-D14
Memory 16GB (2 x 8GB Corsair Vengeance Black DDR3 PC3-12800 C9 1600MHz)
Video Card(s) MSI RTX 2080 SUPER Gaming X Trio
Storage Samsung 850 Pro 256GB | WD Black 4TB | WD Blue 6TB
Display(s) ASUS ROG Strix XG27UQR (4K, 144Hz, G-SYNC compatible) | Asus MG28UQ (4K, 60Hz, FreeSync compatible)
Case Cooler Master HAF 922
Audio Device(s) Creative Sound Blaster X-Fi Fatal1ty PCIe
Power Supply Corsair AX1600i
Mouse Microsoft Intellimouse Pro - Black Shadow
Keyboard Yes
Software Windows 10 Pro 64-bit
This question sounds more like one for a DIY forum!

Nevertheless, I think the answers you've been given here are pretty sound. :cool:
 
Joined
Oct 2, 2005
Messages
3,059 (0.45/day)
Location
Baltimore MD
Processor Ryzen 5900X
Motherboard ASUS Prime X470 Pro
Cooling Arctic liquid freezer II 240
Memory 2 x 16 Gb Gskill Trident Z 3600 Mhz
Video Card(s) MSI Ventus 3060 Ti OC
Storage Samsung 960 EVO 500 Gb / 860 EVO 1 Tb
Display(s) Dell S2719DGF
Case Lian Li Lancool II Mesh
Audio Device(s) Soundblaster Z
Power Supply Corsair RM850x
Mouse Logitech G703
Keyboard Logitech G513
Software Win 11
get a file and file a slot for the flathead screw driver its quite easy
 
Top