mikechinym
New Member
- Joined
- Jun 16, 2005
- Messages
- 80 (0.01/day)
- Location
- Malaysia
Hi all,
i own 2 new unit of TPLINK TL-WR1043ND.
since i m out of IP address, i need these wireless router to expand my network IPs.
My network environment,
1st unit of wireless router is setup as
WAN : Static IP (192.168.0.230)
LAN : DHCP range from (192.168.10.2~200)
Wireless : ON (Channel 1)
2nd unit of wireless router is setup as
WAN : Static IP (192.168.0.231)
LAN : DHCP (192.168.20.2~200)
Wireless : ON (Channel 6)
others settings leave as default.
<the IPs i use to extend is 192.168.0.230 & 192.168.0.231>
My Problem is :
I cant run 2 unit of wireless router together, only one by a time(if i m lucky,it may not crash for few hours).
if i ON either one unit...there is no problem at all, they working perfect.
PLS HELP.....am i missing some steps??
forget to say, it only crash if someone is running the wireless.
just cable on LAN, there is no crash issue.
i own 2 new unit of TPLINK TL-WR1043ND.
since i m out of IP address, i need these wireless router to expand my network IPs.
My network environment,
1st unit of wireless router is setup as
WAN : Static IP (192.168.0.230)
LAN : DHCP range from (192.168.10.2~200)
Wireless : ON (Channel 1)
2nd unit of wireless router is setup as
WAN : Static IP (192.168.0.231)
LAN : DHCP (192.168.20.2~200)
Wireless : ON (Channel 6)
others settings leave as default.
<the IPs i use to extend is 192.168.0.230 & 192.168.0.231>
My Problem is :
I cant run 2 unit of wireless router together, only one by a time(if i m lucky,it may not crash for few hours).
if i ON either one unit...there is no problem at all, they working perfect.
PLS HELP.....am i missing some steps??
forget to say, it only crash if someone is running the wireless.
just cable on LAN, there is no crash issue.
Last edited: