- Joined
- Feb 23, 2011
- Messages
- 467 (0.10/day)
- Heatware
- 4 0 0
System Name | Gaming PC |
---|---|
Processor | Intel Core i5 12400f at 5.4Ghz |
Motherboard | Asrock B660 Riptide PG (Eternal clock gen) |
Cooling | ARCTIC Liquid Freezer II |
Memory | 32GB Kingston FURY Renegade |
Video Card(s) | Zotac RTX 4070ti Trinity |
Storage | WD SN750 SE 1TB M.2 + 2x Kioxia Exceria 480GB |
Display(s) | BenQ EX2780Q 1440p/144Hz |
Case | Lian Li 205M |
Power Supply | Corsair RM850x SHIFT |
After thinking long and hard it's time to say good bye to this, Have never had such a laugh and as much fun with any PC component as I have with this.
It's been uprated and re-gassed by Phase god Gray Mole to handle 250w of heat while being quiet.
Kept my 2500k that was clocked a 5Ghz at -40c'ish idle, -25c'ish load.
Mechanically the unit is fine, I've removed the stock controller as the stock Mach 2 GT controllers are more trouble then they are worth and have just re-wired it to run directly off the mains rather then being turned on by a PC.
Aesthetically it needs some work, But any one that enjoys modding will have a laugh with this.
This thing would be perfect for someone who's a case modding nut and would want to use this in a project or some HWBot junkie to rack up some high CPU clocks.
Comes with loads of spare insulation foam and such for insulating your motherboard.
A word of warning, Phase parts are NOT cheap, The little things I changed cost a small fortune. ( Mains powered temp display, 240v AC to 12v DC transformer, Insulation and a new hold down which cost £45 on it's own! )
Pretty sure this thing will fit on every CPU socket except for Intels x78 2011
Previous owner thought it would be a good idea to window mod the case, What a nob
Video of it running Intel Burn Test on my 5Ghz 2500k can be seen... HERE
Now the price, I'm going to start off at £300 and see what happens. Little Devil uses the exact same parts as this in his units and charges £550-600 for one his units plus shipping
Payment via paypal or BT ( Preferable )
My Heat rating - HERE
My ebay rating - HERE
Price is not set in stone, You want to make an offer then go ahead
I would rather this thing be collected from me ( Wolverhampton ) but I could ship it if needed.
This thing would be perfect for someone who's a case modding nut and what's to use this in a project or some HWBot junkie to rack up some high CPU clocks.
TRADES WELCOME...
Water cooling parts
Graphics cards - 2Gb VRAM only
Blah..Blah..
It's been uprated and re-gassed by Phase god Gray Mole to handle 250w of heat while being quiet.
Kept my 2500k that was clocked a 5Ghz at -40c'ish idle, -25c'ish load.
Mechanically the unit is fine, I've removed the stock controller as the stock Mach 2 GT controllers are more trouble then they are worth and have just re-wired it to run directly off the mains rather then being turned on by a PC.
Aesthetically it needs some work, But any one that enjoys modding will have a laugh with this.
This thing would be perfect for someone who's a case modding nut and would want to use this in a project or some HWBot junkie to rack up some high CPU clocks.
Comes with loads of spare insulation foam and such for insulating your motherboard.
A word of warning, Phase parts are NOT cheap, The little things I changed cost a small fortune. ( Mains powered temp display, 240v AC to 12v DC transformer, Insulation and a new hold down which cost £45 on it's own! )
Pretty sure this thing will fit on every CPU socket except for Intels x78 2011
Previous owner thought it would be a good idea to window mod the case, What a nob
Video of it running Intel Burn Test on my 5Ghz 2500k can be seen... HERE
Now the price, I'm going to start off at £300 and see what happens. Little Devil uses the exact same parts as this in his units and charges £550-600 for one his units plus shipping
Payment via paypal or BT ( Preferable )
My Heat rating - HERE
My ebay rating - HERE
Price is not set in stone, You want to make an offer then go ahead
I would rather this thing be collected from me ( Wolverhampton ) but I could ship it if needed.
This thing would be perfect for someone who's a case modding nut and what's to use this in a project or some HWBot junkie to rack up some high CPU clocks.
TRADES WELCOME...
Water cooling parts
Graphics cards - 2Gb VRAM only
Blah..Blah..