• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] Curly

Canuto

New Member
Joined
Jul 8, 2006
Messages
2,153 (0.33/day)
Location
Portugal
Processor Pentium D 930 @3.6Ghz
Motherboard Biostar 945P-A7A(8.0)
Cooling Stock cooling, 1x92mm outtake fan
Memory Infineon 2x512Mb DDR2-533 @641Mhz 4-4-4-12
Video Card(s) Powercolor X550 512Mb Hipermemory @510/261Mhz
Storage Seagate Barracuda 7200.7 200Gb
Display(s) iMax 17" LCD
Audio Device(s) Realtek AC'97 ALC655
Power Supply LC Power 550w Silent Giant GREEN POWER
Software Windows Vista Ultimate x86
The line that separates madness from greatness is too thin to tell the difference...
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.74/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
Interesting way of putting it, but assuming your giving your answer in that, i'm gonna go with u like it?
 

Canuto

New Member
Joined
Jul 8, 2006
Messages
2,153 (0.33/day)
Location
Portugal
Processor Pentium D 930 @3.6Ghz
Motherboard Biostar 945P-A7A(8.0)
Cooling Stock cooling, 1x92mm outtake fan
Memory Infineon 2x512Mb DDR2-533 @641Mhz 4-4-4-12
Video Card(s) Powercolor X550 512Mb Hipermemory @510/261Mhz
Storage Seagate Barracuda 7200.7 200Gb
Display(s) iMax 17" LCD
Audio Device(s) Realtek AC'97 ALC655
Power Supply LC Power 550w Silent Giant GREEN POWER
Software Windows Vista Ultimate x86
I do gave it a ten to reward the originality ;)
 
Joined
Feb 27, 2006
Messages
1,098 (0.17/day)
Location
Charlotte NC
System Name Rigel / Altair
Processor Ryzen 3900x / Xeon x3440
Motherboard Aorus X570 Pro Wifi / Asus P7P55D
Cooling H110i / CM MASTERLIQUID MAKER 92
Memory 16gb DDR4-3200 / 8GB DD3-2000
Video Card(s) GTX1080ti / 9600gt
Storage Crucial P1 500gb - Crucial MX500 500gb / Unraid NAS
Display(s) LG 43UN700-B
Case Phanteks P500 / CM N400
Audio Device(s) FX Audio DAC 6
Power Supply eVGA 1000GQ / Seasonic Focus 500w
Cool case. Nice equpiment. Very original. 8/10
 

Ketxxx

Heedless Psychic
Joined
Mar 4, 2006
Messages
11,521 (1.74/day)
Location
Kingdom of gods
System Name Ravens Talon
Processor AMD R7 3700X @ 4.4GHz 1.3v
Motherboard MSI X570 Tomahawk
Cooling Modded 240mm Coolermaster Liquidmaster
Memory 2x16GB Klevv BoltX 3600MHz & custom timings
Video Card(s) Powercolor 6800XT Red Devil
Storage 250GB Asgard SSD, 1TB Integral SSD, 2TB Seagate Barracuda
Display(s) 27" BenQ Mobiuz
Case NZXT Phantom 530
Audio Device(s) Asus Xonar DX 7.1 PCI-E
Power Supply 1000w Supernova
Software Windows 10 x64
Benchmark Scores Fast. I don't need epeen.
ok after much thought im gonna go with a 7. its a nice mod, however heat buildup must be pretty bad.
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
I love the front plates/
 

DaMulta

My stars went supernova
Joined
Aug 3, 2006
Messages
16,168 (2.50/day)
Location
Oklahoma T-Town
System Name Work in progress
Processor AMD 955---4Ghz
Motherboard MSi GD70
Cooling OcZ Phase/water
Memory Crucial2GB kit (1GBx2), Ballistix 240-pin DIMM, DDR3 PC3-16000
Video Card(s) CrossfireX 2 X HD 4890 1GB OCed to 1000Mhz
Storage SSD 64GB
Display(s) Envision 24'' 1920x1200
Case Using the desk ATM
Audio Device(s) Sucky onboard for now :(
Power Supply 1000W TruePower Quattro
Its going to stay nice and cool too.

IF thats two fans sucking in.
 
Last edited:

wazzledoozle

New Member
Joined
Aug 30, 2004
Messages
5,358 (0.75/day)
Location
Seattle
Processor X2 3800+ @ 2.3 GHz
Motherboard DFI Lanparty SLI-DR
Cooling Zalman CNPS 9500 LED
Memory 2x1 Gb OCZ Plat. @ 3-3-2-8-1t 460 MHz
Video Card(s) HIS IceQ 4670 512Mb
Storage 640Gb & 160Gb western digital sata drives
Display(s) Hanns G 19" widescreen LCD w/ DVI 5ms
Case Thermaltake Soprano
Audio Device(s) Audigy 2 softmod@Audigy 4, Logitech X-530 5:1
Power Supply Coolermaster eXtreme Power Plus 500w
Software XP Pro
Very nice, could use a paint job but 10/10 anyways.
 
Joined
Sep 26, 2006
Messages
6,959 (1.08/day)
Location
Australia, Sydney
Hmm.... If you got a pro to make a wooden PC case, id reckon it'd have a lot of teak oil on it...
Did you lacquer/oil it? I give the case 9/10. It looks neat (not like other wooden PC cases) and its unique
 

randomperson21

New Member
Joined
Dec 28, 2005
Messages
1,531 (0.23/day)
Location
San Luis Obispo, CA
Processor AMD Athlon64 X2 3800+ @ 2.4Ghz
Motherboard ECS NForce4 A-939
Cooling CPU: Zalman CNPS7000B-AlCu GFX: Zalman VF-700AlCu, 2x120mm+5x80mm w/ Ultra 7ch Fan Controller
Memory Kingston 2x512MB DDR PC3200 Dual Channel 3-3-3-8
Video Card(s) EVGA Nvidia 7900GT KO Superclocked
Storage 2xSeagate Barracuda 7200.8/9 160GB SATAII NCQ in RAID0: 300GB total capacity
Display(s) Samsung SyncMaster 941BW (19" widescreen, 1440x900)
Case Antec P180B
Audio Device(s) Built in. 5.1Ch Logitech Z-5500 500w soundsystem, digital Coax connection
Power Supply Spire 500W
Software Windows Vista Ultimate
haha thats great!
 
V

vonEnoch

Guest
Hmm.... If you got a pro to make a wooden PC case, id reckon it'd have a lot of teak oil on it...
Did you lacquer/oil it? I give the case 9/10. It looks neat (not like other wooden PC cases) and its unique

I Have oiled it with Danish oil. The material i have used gets best result with that oil. (have tested alot of different oils and lacquer.

About heat. The case inside is VERY cool. Have 2x120mm throwing in air in the bottom (see pics.) and 1x140 + powersupply 120mm throwing out the warm air from rear. The in-air passes HDs (3xraptor) flows over the motherboard nicely and goes directly out from rear! So the this case has better airflow than most of my previous cases including (4 home built, a couple of antecs, acrylic, small formfactor some chieftechs etc. My previous case was a P160 with watercooling and one extra 120mm that i modded in that was good but this has lower temps.
 
Joined
Oct 22, 2005
Messages
634 (0.09/day)
Location
A suburb of Chicago, IL
System Name The W.O.P.R.
Processor Core i7 920 D0 @ 4.0GHz 1.24 vcore
Motherboard ASUS P6T
Cooling Xigmatek S1283 with push\pull fan configuration.
Memory 6GB Mushkin DDR3 1600MHz 7-8-7-20
Video Card(s) 2 - ASUS EAH5850 CrossfireX
Storage 1TB WD Black
Display(s) I-INC 28" 1920x1200 HDMI
Case Ultra M998
Audio Device(s) Realtek HD
Power Supply Corsair TX750W
Software Windows 7 Enterprise 64-bit
thats very unique, well thought out
 
Joined
May 11, 2006
Messages
388 (0.06/day)
Location
Texas
Its not really my style but i gave you a 9 for creativity and all the work you must have put into it.
 

Schnookums

New Member
Joined
Jan 21, 2007
Messages
33 (0.01/day)
Location
Englant
Processor Intel Pentium 4 2.8GHz Northwood
Motherboard Dell
Cooling Standard
Memory 512MB
Video Card(s) Radeon 9550
Storage 40GB
Display(s) Dell CRT
Case Dell Dimension
Audio Device(s) Onboard
Power Supply Wall Socket?
Software Xp Pro
Mad props for the case and the hardware. Well done to you son.
 

overcast

New Member
Joined
Jan 11, 2006
Messages
733 (0.11/day)
Processor AMD Opteron 165 @ 2.7ghz Stock Voltage
Motherboard ASUS A8N-SLI Premium
Cooling Stock Opteron
Memory OCZ PC4000 EB Platinum 2GB
Video Card(s) ATI X1900XTX
Storage 2 x Western Digital 74gb Raptors
Display(s) NEC 990B 19"
Case Antec P150
Audio Device(s) Onboard
Power Supply Seasonic S12-500
Software XP 32bit
You know, I think wood would give better cooling than metal. More breathing. I would have chose something better than particle board, but I like the design. I was thinking of getting my dad to make one and that is basicly what I had in mind.
LOL @ "more breathing", you honestly believe wood conducts heat better than metal?!?
 

overcast

New Member
Joined
Jan 11, 2006
Messages
733 (0.11/day)
Processor AMD Opteron 165 @ 2.7ghz Stock Voltage
Motherboard ASUS A8N-SLI Premium
Cooling Stock Opteron
Memory OCZ PC4000 EB Platinum 2GB
Video Card(s) ATI X1900XTX
Storage 2 x Western Digital 74gb Raptors
Display(s) NEC 990B 19"
Case Antec P150
Audio Device(s) Onboard
Power Supply Seasonic S12-500
Software XP 32bit
To the original poster, why didn't you use MDF?
 
V

vonEnoch

Guest
To the original poster, why didn't you use MDF?

I use it because it is light and its a good material to glue the curlybirch pieces on. Its more stable to tempchanges than massive wood.
 
Joined
Jan 6, 2007
Messages
2,555 (0.40/day)
Location
Illinois
Processor i7 2600k@4.6ghz
Motherboard MSI z68ma-ed55
Cooling Silentx Extreem 120mm
Memory 2x4gb XMS 7-8-7-20 1600
Video Card(s) HD6870
Storage 2x128gb Kingston Hyper-X (Raid0), 2x750gb RE3 (RAID1), 2x750gb RE3 (RAID1)
Display(s) Soyo 24", Gateway 22"
Case Fractal Design Arc Mini 6x120mm fans.
Audio Device(s) Onboard
Power Supply Zalman 750w
Software Windows 7
I have this urge you pick it up with my gravity gun and smash it against the wall. 10/10
 

Completely Bonkers

New Member
Joined
Feb 6, 2007
Messages
2,576 (0.41/day)
Processor Mysterious Engineering Prototype
Motherboard Intel 865
Cooling Custom block made in workshop
Memory Corsair XMS 2GB
Video Card(s) FireGL X3-256
Display(s) 1600x1200 SyncMaster x 2 = 3200x1200
Software Windows 2003
I voted 4/10 because:

I can see you put a lot of effort (and time) into the box.

But sorry, I think the net effect is dreadful. Just looks like an old junk box.

Your expensive veneering didn't pull off, neither did your attenmpt to "hide" the edges by using the metal and wood trims.

I would knock it down... consider it practice... and design a more aesthetic piece. I see you've got some serious woodworking tools in the background! You can do it!
 
F

flockerzi

Guest
you are retarded i would like to see you do any better dude 10/10
 
M

MrGlasson

Guest
Hands-On

Dude, that's some serious hands-on kinda work. 9/10 for sure... yeah, particle board is easier to work with. Hardwood woulda been a 10/10!
 
A

atarist

Guest
i live in the u.k and some people over here mod cars 2 the max i.e alloy wheels sound systems and stuff one of the things they do is mod the interior in there cars
With sheets of carbon-fibre that can be picked up at the cars shops
One thinks your box would look sweet in carbon-fibre finish.
 

King Wookie

New Member
Joined
Jan 1, 2008
Messages
1,197 (0.20/day)
Location
Johannesburg, South Africa
System Name Blackbox
Processor Intel i5 750 @ stock for now
Motherboard EVGA P55 LE
Cooling Corsair H50 with 2 x Zalman ZM-F3 push/pull
Memory 2 x 2g team extreem DDR3 2000
Video Card(s) Asus GTX 460 Top
Storage Seagate 500.12, Seagate 320.11
Display(s) BenQ FP222W - 22 inches
Case CM 590 with 5x various fans (Thermalright/Noctua)
Audio Device(s) Onboard
Power Supply Corsair HX620
Software XP home SP3
Definitely a 9 out of 10 from me.

I personally would have gone with a different veneer, or a darker stain, but it looks awesome!
 
Top