*** F@H Tech Assistance Thread ***

[Tardan]

I copied this from your System Specs.

Processor:	Intel i5 2500k @ 4.5 GHz
Motherboard:	ASUS P8Z68 V-PRO
Video Card:	EVGA GTX 680

Am I correct that you are folding on the GTX 680 and 2500K? The 2500K shouldn't give you any problems but the GTX 680 is another story.

I don't have a GTX 680 but spotted this thread while trying to talk my wallet into allowing me to by one.

The GTX 680 was released after the v7 client and since this is new architecture there's no information in that client for this GPU. But wait there is a solution!

First you need the v7 client that I'm guessing you downloaded.

Next you need to follow these GTX 680 support instructions.

Let us know how you're doing.

It works! Thank you very much for the help! And you were right about the CPU, it started to show progress soon after. Thank you again.

 

[BUCK NASTY]

It works! Thank you very much for the help! And you were right about the CPU, it started to show progress soon after. Thank you again.

Post a screen shot of the client and the PPD please.

 

[Tardan]

Post a screen shot of the client and the PPD please.

Done and done. Not sure if this is good or not, would be good to know.

 

[TeXBill]

So that is the PPD for a GTX680, hmmmmm

 

[TheoneandonlyMrK]

So that is the PPD for a GTX680, hmmmmm

yeh not bad at all, ish

 

[Doc41]

Hi everyone, i just read about the chimp challenge and was wondering if i could join in now?

i downloaded the V7 client a while ago and probably can fold for ~12 hours a day with my rig and been wondering about the passkey. thanks

 

[Chicken Patty]

Hi everyone, i just read about the chimp challenge and was wondering if i could join in now?

i downloaded the V7 client a while ago and probably can fold for ~12 hours a day with my rig and been wondering about the passkey. thanks

Yes, you can still join, better late than never. Just make sure you follow the instructions in this thread and join with the right username and right team #

http://www.techpowerup.com/forums/showthread.php?t=165282

 

[bob80]

Hi guys

I put a Nvidia 8800GTX and AMD Radeon HD6570 in my rig... I'd like to let them work together. Is it possible ??

At the moment the 6570 WU fail, only the gtx WU works well.

Have you got suggestions ??

Another question, I want to decrease the cpu load (atm is 100%) how can I do this ?

 

[Athlonite]

bob80 well the first thing to do is fill in your system specs in your profile so we know what hardware your using

secondly which clients are you using

 

[jamsbong]

I've tried both v2 and v7. In the v2, I can't get it to work on the GTX580 and somehow it seems to be idle on the 2700K CPU as well.

in the v7, I don't know how to configure it. I suppose I could spend lots of time figuring it out but I don't have the time to do it.

Anyone can link me to a setup guide to run chimp-techpowerup on a machine with 2700K CPU and GTX580 GPU?

 

[hertz9753]

I've tried both v2 and v7. In the v2, I can't get it to work on the GTX580 and somehow it seems to be idle on the 2700K CPU as well.

in the v7, I don't know how to configure it. I suppose I could spend lots of time figuring it out but I don't have the time to do it.

Anyone can link me to a setup guide to run chimp-techpowerup on a machine with 2700K CPU and GTX580 GPU?

http://www.techpowerup.com/forums/showthread.php?t=137137

I use Nvidia 275.33 drivers on my GTX 570.

I will send you a pm with the user name and passkey.

 

[bob80]

bob80 well the first thing to do is fill in your system specs in your profile so we know what hardware your using

secondly which clients are you using

Intel Core I5 2500K
Asus P8P67 EVO
8800GTX / HD 6570 1GB
2*4GB + 2*2GB DDR3 RAM 2133 9-11-10-28

I've tried both client...V2 and V7...actually I'm using the V2 with 8800GTX and 2 core SMP.

 

[thebluebumblebee]

Intel Core I5 2500K
Asus P8P67 EVO
8800GTX / HD 6570 1GB
2*4GB + 2*2GB DDR3 RAM 2133 9-11-10-28

I've tried both client...V2 and V7...actually I'm using the V2 with 8800GTX and 2 core SMP.

If you're saving cores for the GPU, don't. Saving cores is for ATI/AMD GPU's, and very high end Nvidia GPU's.

 

[t_ski]

What kind of PPD can a Phenom II x4 910 get @ stock? No GPU's, just CPU...

 

[TheoneandonlyMrK]

id have to guestimate 4-8K dependant on wu type but ive used smp2 at most and never just cpu so its a guess, every bit counts though and on its own i think it may do more

 

[Athlonite]

your guesstimate is correct as my 940 get around that when it folds and there's not alot of difference between the 910 and 940

 

[T4C Fantasy]

i have a question, i have a HD7970 and a HD6870.. i know i cant crossfire however... can i still use both on the same motherboard to fold?

 

[TeXBill]

yes you can just use the ver7 client


yes

 

[T4C Fantasy]

yes you can just use the ver7 client

thats just the beauty of hardware that just works isnt it?

 

[T4C Fantasy]

thats just the beauty of hardware that just works isnt it?

heh

 

[popswala]

Its been a while since I ran smp. How you get the passkey for it?

 

[T4C Fantasy]

Its been a while since I ran smp. How you get the passkey for it?

i registered my name thats all

 

[popswala]

Where at? I did before but can't remember.

 

[T4C Fantasy]

Where at? I did before but can't remember.

http://fah-web.stanford.edu/cgi-bin/getpasskey.py

 

[bogmali]

^^^

You tried a different driver?