- Joined
- Jul 4, 2012
- Messages
- 574 (0.13/day)
- Location
- Australia
Processor | Intel® Core i5 6600 |
---|---|
Motherboard | Asus H170 Pro Gaming |
Cooling | Hyper 212 Evo |
Memory | G.Skill Ripjaws V Series 16GB DDR4 2400mhz |
Video Card(s) | Gigabyte Geforce GTX 960 G1 4GB Gaming |
Storage | 256GB Intel SSD 525 Series |
Display(s) | 24" LG LED Monitor |
Case | Corsair Carbide 200R |
Power Supply | Seasonic MK12II 620W |
Mouse | Logitech G5 |
Keyboard | Logitech G110 |
Software | Windows 10 x64 |
Hi all,
So I got a brand new ocz vertex 4 yesterday, had a few issues.Upon installing windows in the "unpacking windows files" section it didnt get to 1% before it errored out saying that a file was missing or corrupt. (Note however: A week before this i used the same dvd drive and windows disc (legit and propper) to re-install windows on my old ssd (kingston 64gb). After trying several times and continuing to fail, i started trouble shooting, i tried unplugging all other hdd's except the new ssd and dvd drive, still failed. occassionally it got to 11% then got stuck...at this stage i went to bed.
When i woke up this morning i tried again, failed straight away.I then swapped sata cables with one of the hdd sata cables and it worked, it took about 45minutes though! =\
However then i used that old sata cable on a different drive in windows and it worked too!!
after everything it works fine in windows..but im wondering whether the ssd has a fault, however as many of you know there are no testing tools really for ssd's yet.. =\
I installed all the standard drivers, did windows update and updated the firmware for the ssd and still is going ok..but im very nervous that something is still amiss!as I dont really know what happened to make it work!!?
Anyone have any thoughts..?ideas?Comments?Suggestions..?
Much appreciated guys.
Cheers.
So I got a brand new ocz vertex 4 yesterday, had a few issues.Upon installing windows in the "unpacking windows files" section it didnt get to 1% before it errored out saying that a file was missing or corrupt. (Note however: A week before this i used the same dvd drive and windows disc (legit and propper) to re-install windows on my old ssd (kingston 64gb). After trying several times and continuing to fail, i started trouble shooting, i tried unplugging all other hdd's except the new ssd and dvd drive, still failed. occassionally it got to 11% then got stuck...at this stage i went to bed.
When i woke up this morning i tried again, failed straight away.I then swapped sata cables with one of the hdd sata cables and it worked, it took about 45minutes though! =\
However then i used that old sata cable on a different drive in windows and it worked too!!
after everything it works fine in windows..but im wondering whether the ssd has a fault, however as many of you know there are no testing tools really for ssd's yet.. =\
I installed all the standard drivers, did windows update and updated the firmware for the ssd and still is going ok..but im very nervous that something is still amiss!as I dont really know what happened to make it work!!?
Anyone have any thoughts..?ideas?Comments?Suggestions..?
Much appreciated guys.
Cheers.