• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

EKWB Intros New GeForce GTX 680 Water Block

Joined
Dec 6, 2011
Messages
4,784 (1.06/day)
Location
Still on the East Side
EK Water Blocks, Ljubljana based premium water cooling gear provider, is excited to present the EK-FC680 GTX SOC, a new Full Cover (FC) water block for Gigabyte's premium SuperOverclock (GV-N680SO-2GD) edition graphic card.

EK-FC680 GTX SOC is a high performance full-cover water block for engineered specifically for GIGABYTE design GeForce GTX 680 Super OverClock (SOC) series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list. This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX SOC water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.





Base is made of nickel plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws and plastic washers.

EK also encloses two-slot I/O bracket which replaces the original three-slot, in order to make installation of mutliple graphics cards easier.

Up to four EK-FC680 GTX SOC series water blocks can be interconnected with EK-FC Bridge & Link system. Additionally this water block lines up with EK-FC680 GTX(+) as well as EK-FC680 GTX FTW series water blocks thus even further expanding users choice of graphics cards. The correct connection link for this water block is already enclosed with the product.

Enclosed:
- EK-FC680 GTX SOC series water block
- EK-FC Link
- 2-slot I/O bracket
- mounting mechanism with screw-in brass standoffs
- thermal pads

Made in Slovenia - Europe!

The EK-FC680 GTX SOC - Acetal+Nickel water blocks are readily available for purchase through EK Webshop and our Partner Reseller Network.

View at TechPowerUp Main Site
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Gosh I really wish they would drop that circles theme it really is ugly. The amount of time taken to machine those is just so wasteful...Only saving grace is it's face down in your case so you don't have to look at it....
 

HammerON

The Watchful Moderator
Staff member
Joined
Mar 2, 2009
Messages
8,397 (1.52/day)
Location
Up North
System Name Threadripper
Processor 3960X
Motherboard ASUS ROG Strix TRX40-XE
Cooling XSPC Raystorm Neo (sTR4) Water Block
Memory G. Skill Trident Z Neo 64 GB 3600
Video Card(s) PNY RTX 4090
Storage Samsung 960 Pro 512 GB + WD Black SN850 1TB
Display(s) Dell 32" Curved Gaming Monitor (S3220DGF)
Case Corsair 5000D Airflow
Audio Device(s) On-board
Power Supply EVGA SuperNOVA 1000 G5
Mouse Roccat Kone Pure
Keyboard Corsair K70
Software Win 10 Pro
Benchmark Scores Always changing~
I have to agree. Besides the circles though it does look like a nice water block:)
 
Joined
Nov 21, 2010
Messages
2,223 (0.46/day)
Location
Right where I want to be
System Name Miami
Processor Ryzen 3800X
Motherboard Asus Crosshair VII Formula
Cooling Ek Velocity/ 2x 280mm Radiators/ Alphacool fullcover
Memory F4-3600C16Q-32GTZNC
Video Card(s) XFX 6900 XT Speedster 0
Storage 1TB WD M.2 SSD/ 2TB WD SN750/ 4TB WD Black HDD
Display(s) DELL AW3420DW / HP ZR24w
Case Lian Li O11 Dynamic XL
Audio Device(s) EVGA Nu Audio
Power Supply Seasonic Prime Gold 1000W+750W
Mouse Corsair Scimitar/Glorious Model O-
Keyboard Corsair K95 Platinum
Software Windows 10 Pro
I don't mind them but do agree that they're a waste of machining/manufacturing time
 
Joined
Oct 10, 2009
Messages
868 (0.16/day)
Location
London, UK
System Name The one under the desk / Media Centre
Processor Xeon X3730@3.6GHZ / Phenom II X4 805E
Motherboard Gigabyte P55M-UD4 / Asus Crosshair III
Cooling Corsair H70 + 2*PWM fan / Arctic Alpine 11
Memory 16GB DRR3-1333 9-9-9-27 / 4GB Crucial DDR3-1333
Video Card(s) Asus DirectCU GTX 680 / Gigabyte 560TI
Storage Kingston V200 128GB, WD6400AAKS, 1TB Seagate 7.2kRPM SSHD / Kingston V200 128GB
Display(s) Samsung 2343BW + Dell Ultrasharp 1600*1200 / 32" TV
Case C'M' Silencio 550 / Some ancient SilverStone brushed aluminium media centre
Audio Device(s) No.
Power Supply Thermaltake Toughpower XT 675W / EVGA 430W
Mouse Mionix Naos 3200 / Generic PS2
Keyboard Roccat Ryos TKL Pro / Evoluent Mouse Friendly Keyboard (Logitech OEM)
Software Windows 7 Ult x64
Benchmark Scores Nah.
Bit late to be putting out new 680 products isn't it?
 
Joined
Apr 21, 2010
Messages
5,731 (1.13/day)
Location
West Midlands. UK.
System Name Ryzen Reynolds
Processor Ryzen 1600 - 4.0Ghz 1.415v - SMT disabled
Motherboard mATX Asrock AB350m AM4
Cooling Raijintek Leto Pro
Memory Vulcan T-Force 16GB DDR4 3000 16.18.18 @3200Mhz 14.17.17
Video Card(s) Sapphire Nitro+ 4GB RX 580 - 1450/2000 BIOS mod 8-)
Storage Seagate B'cuda 1TB/Sandisk 128GB SSD
Display(s) Acer ED242QR 75hz Freesync
Case Corsair Carbide Series SPEC-01
Audio Device(s) Onboard
Power Supply Corsair VS 550w
Mouse Zalman ZM-M401R
Keyboard Razor Lycosa
Software Windows 10 x64
Benchmark Scores https://www.3dmark.com/spy/6220813
Bit late to be putting out new 680 products isn't it?

Why's that? NV aren't going to be coming out with a new series until way into 2013
 
Joined
Oct 10, 2009
Messages
868 (0.16/day)
Location
London, UK
System Name The one under the desk / Media Centre
Processor Xeon X3730@3.6GHZ / Phenom II X4 805E
Motherboard Gigabyte P55M-UD4 / Asus Crosshair III
Cooling Corsair H70 + 2*PWM fan / Arctic Alpine 11
Memory 16GB DRR3-1333 9-9-9-27 / 4GB Crucial DDR3-1333
Video Card(s) Asus DirectCU GTX 680 / Gigabyte 560TI
Storage Kingston V200 128GB, WD6400AAKS, 1TB Seagate 7.2kRPM SSHD / Kingston V200 128GB
Display(s) Samsung 2343BW + Dell Ultrasharp 1600*1200 / 32" TV
Case C'M' Silencio 550 / Some ancient SilverStone brushed aluminium media centre
Audio Device(s) No.
Power Supply Thermaltake Toughpower XT 675W / EVGA 430W
Mouse Mionix Naos 3200 / Generic PS2
Keyboard Roccat Ryos TKL Pro / Evoluent Mouse Friendly Keyboard (Logitech OEM)
Software Windows 7 Ult x64
Benchmark Scores Nah.
Why's that? NV aren't going to be coming out with a new series until way into 2013

Sure, but most enthusiasts who were ever going to buy a 680 have already done so.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Bit late to be putting out new 680 products isn't it?

Well this one is for a specific 680 so of course when they do decide to do a non-reference block they kinda have to decide which "special" one it's going to be not just put into production a new block for the first "OC" card that's out of the gate. Considering the wacky cooler Gigabyte chose for their "Premier" 680 I'm would say it's an improvement...
 
Joined
Oct 10, 2009
Messages
868 (0.16/day)
Location
London, UK
System Name The one under the desk / Media Centre
Processor Xeon X3730@3.6GHZ / Phenom II X4 805E
Motherboard Gigabyte P55M-UD4 / Asus Crosshair III
Cooling Corsair H70 + 2*PWM fan / Arctic Alpine 11
Memory 16GB DRR3-1333 9-9-9-27 / 4GB Crucial DDR3-1333
Video Card(s) Asus DirectCU GTX 680 / Gigabyte 560TI
Storage Kingston V200 128GB, WD6400AAKS, 1TB Seagate 7.2kRPM SSHD / Kingston V200 128GB
Display(s) Samsung 2343BW + Dell Ultrasharp 1600*1200 / 32" TV
Case C'M' Silencio 550 / Some ancient SilverStone brushed aluminium media centre
Audio Device(s) No.
Power Supply Thermaltake Toughpower XT 675W / EVGA 430W
Mouse Mionix Naos 3200 / Generic PS2
Keyboard Roccat Ryos TKL Pro / Evoluent Mouse Friendly Keyboard (Logitech OEM)
Software Windows 7 Ult x64
Benchmark Scores Nah.
Well this one is for a specific 680 so of course when they do decide to do a non-reference block they kinda have to decide which "special" one it's going to be not just put into production a new block for the first "OC" card that's out of the gate. Considering the wacky cooler Gigabyte chose for their "Premier" 680 I'm would say it's an improvement...

The cooler might be pants but it's also very expensive. If you're planning to bin it, I'd have thought you'd be better off with some other card.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
The cooler might be pants but it's also very expensive. If you're planning to bin it, I'd have thought you'd be better off with some other card.

Good point. But they really went all out on the card hardware and component wise. I don't know that anyone has gone that far. It is a shame they went "Colorful" on the cooler. EK is at least offering a great alternative.
 
Joined
Jan 28, 2009
Messages
1,742 (0.31/day)
Location
on top of that big mountain on mars(Romania)
System Name ( . Y . )
What's wrong with the circles? i think they are okay.:p
 

XNine

CaseLabs Rep
Joined
Mar 9, 2012
Messages
172 (0.04/day)
Location
Los Angeles
System Name Project 14
Processor Intel 4770K
Motherboard Asus Impact
Cooling MIPS Waterblock
Memory 16GB
Video Card(s) GTX 780 with AquaComputer block
Storage 256GB Samsung Pro 850, 2TB Western Digital HDD
Display(s) 27" Acer 1440P
Case CaseLabs Mercury S3
Power Supply Silverstone 700w Sleeved with MDPCX
Mouse Mionix Castor
Keyboard Code with Cherry Clears
Software Windows 10
Actually, I was a bit hesitant about the circle design myself. They actually look way better in person than they do in photography.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
It's just as an aesthetic they aren't that appealing. As a CNC Machinist I KNOW the amount of programming and machine time it takes to do something like that. Just seems like a waste for something that isn't even cool or stylish. I mean if your gonna mill something into the surface I dunno how about some cool flames? Would take the same amount of time.
 
Joined
May 22, 2010
Messages
2,516 (0.50/day)
Location
Canada
System Name m1dg3t | DeathBox | HairPi 3
Processor 3570k @ 4.0 1.15v BIOS | q9550 @ 3.77 1.325v BIOS
Motherboard Asrock z77e iTX | p5q Dlx 2301 BIOS
Cooling Custom Water | D-14 & HR-03gt | Passive HSF
Memory Samsung MV-3V4G3D 4g x 2 @ 1866 1.35v | OcZ RpR 2g x 4 @ 1067 2.2v
Video Card(s) MSi 7950 tf3 @1000 / 1350 | Asus 5870 V2 @ 900 / 1275
Storage Adata sx900 256Gb / WD 2500 HHTZ | WD 1001 FALS x 2
Display(s) BenQ gw2750hm | 46" Sharp Quatron
Case BitFenix Prodigy - m0dd3d | Antec Fusion Remote MAX
Audio Device(s) Onboard Toslink > Yamaha HTR 6290 | Xonar HDAV1.3 > Yamaha DSP z7
Power Supply Ocz mXp700w | Ocz zx850w | Cannakit 5v 2.5a
Mouse Logitech G700s | Logitech G9x - Cable Repaired
Keyboard TT Meka G1 - Black w Cherry Blacks| Logitech G11
Software Win7 Home | Xp sp3 & Vista ultimate | Raspbian
Benchmark Scores Epeen!! Who needs epeen??
Lol

That is all :)
 
Top