My 4770k delid video (IHS removal)

[Protagonist]

While I do agree there is an inherent problem with LGA2011.

It's bloody outdated compared to Haswell

If they really want to push their X line they should just ditch IVY-E and release Haswell-E already.

That's not going to happen cause the so called E platform is just bits and pieces scattered from what remains of their Xeons after production.

They should just go back to One socket one chipset for all the X, K and non K like the 775 days

 

[boulard83]

There is the base line for my futur TIM testing and a possible lapping if the IHS is not 100% flat.

 

[Intel God]

Video @ http://infodupat.com/forum/viewtopic.php?f=37&t=488

@ 4.4ghz 1.3vcore
Load temp with Small FFT was 85+°c
Now i get ~75°c ( with NH1 paste )

** Waiting som liquid pro and ultra TIM for better results **

There is the base line for my futur TIM testing and a possible lapping if the IHS is not 100% flat.
http://www.infodupat.com/MiscPics/boulard83_20min_aida_4400_nh1.jpg

Could i get a link to those blades that you used?

 

[boulard83]

These are standard blades from this :

It's best to use razor blade, they are much thiner, making delid really EZer.

Just hold the blad with plier.

 

[Intel God]

These are standard blades from this :
http://thumbs.dreamstime.com/z/exacto-knife-27294614.jpg

It's best to use razor blade, they are much thiner, making delid really EZer.
http://www.badgerandblade.com/gallery/displayimage.php?imageid=3478

Just hold the blad with plier.

Thank you

 

[boulard83]

Np !

 

[boulard83]

First paste testing.
Noctua NH-1 versus EVGA Frostbite.

Well, the frostbite suck .... loll !
I had good hope on the frostbite paste since it seems to spread well under pressure but it did not deliver good results.


Edit, i also prepared the CPU for the incoming CLP and CLU "TIM".

EDIT 2 : I just redid the Frostbite application but my first ony appeared to be perfect. I had similar result on second application, quickly peaked over 80°c on AIDA. EVGA Frostbite seems is bad at this job...

 

[boulard83]

Got something in the mail today