AMD FX OC'ers Club

[Random Murderer]

just smashed the back doors of 32M!!

http://img.techpowerup.org/131112/superpi32m13m18s578.png


edit:

what about 1M!?

http://img.techpowerup.org/131112/superpi1m13.275.png


FUCKKK YEAA!

http://hwbot.org/user/d1nky/

That's a damn nice chip. You put it under cold yet?

 

[d1nky]

That's a damn nice chip. You put it under cold yet?

nah only cold ambients lol

I am intending to get a pot some day, if I still got this chip then it will be demolished on LN2.

if not ill sell the rig, and keep quiet about how tortured it has been!

I just tried benching at 5750 but it locked up, probably being to impatient as im going to bed!

johan shall see this tomorrow... im waiting!

 

[Irony]

It was cold outside this morning, opened the window and tried some clocking. Still could only get 5.2 stable enough to bench. Water temp was down to 4c lol

Edit: I only needed like 1.51v, which is way lower than it normally needs for 5.0. The colder it gets the better it performs by alot. I kinda wanna try some subzero lol

 

[d1nky]

It was cold outside this morning, opened the window and tried some clocking. Still could only get 5.2 stable enough to bench. Water temp was down to 4c lol

Edit: I only needed like 1.51v, which is way lower than it normally needs for 5.0. The colder it gets the better it performs by alot. I kinda wanna try some subzero lol

I find the same, sounds like you've got a terrible chip or something is wrong!

I know these boards are pretty crap at keeping the power delivery and not tripping what seems to be OCP, but its getting there.

although my fx4100 couldn't go much above 5ghz for benching, similar temps!

 

[Johan45]

just smashed the back doors of 32M!!

http://img.techpowerup.org/131112/superpi32m13m18s578.png


edit:

what about 1M!?

http://img.techpowerup.org/131112/superpi1m13.275.png


FUCKKK YEAA!

http://hwbot.org/user/d1nky/

Nice work D1nky!! I think it's time you went back to work!! Just remember when you're on top there's only one way to go. Muah ha ha ha

 

[d1nky]

Nice work D1nky!! I think it's time you went back to work!! Just remember when you're on top there's only one way to go. Muah ha ha ha

wish I could work, I didn't sleep lastnight and that wasn't from benching that was from not being able to breath and coughing!

back off to the doctors in a bit!

and yea im waiting until you try and beat me, then ill beat you... etc etc!

soon we'll be at dice speeds on water

 

[Johan45]

wish I could work, I didn't sleep lastnight and that wasn't from benching that was from not being able to breath and coughing!

back off to the doctors in a bit!

and yea im waiting until you try and beat me, then ill beat you... etc etc!

soon we'll be at dice speeds on water

Man if you're still not breathing there has to be something wrong. It's been way too long buddy. You better get that looked after, I need the competition. Besides I haven't even went over the 1.7v mark with the 9370 ...YET!!

 

[Johan45]

Well it's finally in. Sitting down at the post as I type. Just have to get everything sorted and should have it going by the end of the weekend. http://www.frozencpu.com/products/1...r_Nova_1260_Radiator_35290.html?tl=g30c95s667

It's a bit of a pisser tho. Hasn't been above zero for a week and this weekend is supposed to be up to 10. Oh well the cold is barely here. Can't wait for full on winter now.

 

[Durvelle27]

Took my GPU out of the loop so I'm going for 5.7GHz since its freezing here

 

[Johan45]

Took my GPU out of the loop so I'm going for 5.7GHz since its freezing here

So do you have that CHV in there now

 

[Durvelle27]

So do you have that CHV in there now

I was to late. Was gone when i messaged him. Still have my M5A97 EVO

 

[d1nky]

Well it's finally in. Sitting down at the post as I type. Just have to get everything sorted and should have it going by the end of the weekend. http://www.frozencpu.com/products/1...r_Nova_1260_Radiator_35290.html?tl=g30c95s667

It's a bit of a pisser tho. Hasn't been above zero for a week and this weekend is supposed to be up to 10. Oh well the cold is barely here. Can't wait for full on winter now.

I been getting around 10*c ambients which was when I done those decent benches, im ill as fuck tho so probably wont let myself get that cold for a while!

nice rad, is that part of your 'loop'?

I was to late. Was gone when i messaged him. Still have my M5A97 EVO

could you make/find a block for the vrms and pump them with cold water?!

power delivery would be a lot better!

 

[Durvelle27]

I been getting around 10*c ambients which was when I done those decent benches, im ill as fuck tho so probably wont let myself get that cold for a while!

nice rad, is that part of your 'loop'?



could you make/find a block for the vrms and pump them with cold water?!

power delivery would be a lot better!

I could get a universal block for VRMs

 

[Johan45]

I been getting around 10*c ambients which was when I done those decent benches, im ill as fuck tho so probably wont let myself get that cold for a while!

nice rad, is that part of your 'loop'?

Yepper, I spent most of last night cleaning it and attaching the 9x140 Gelid Wing fans to it. Man that's a lot of friggin wires. I'm going to dump some antifreez in the water and literally put the damn thing outside my window. It's going to be about a 30' round trip, that's why I got the big azz pump. So with any luck I shopuld be able to do some -10° to -20°c benching when winter sets in. That's still on "water" right???

You better take care of yourself D1nky. Take some time off get some rest. When you come back you'll have some new numbers to beat. Muahahahaha

 

[cdawall]

75 water 25 coolant is what I run in mine for winter weather benching anything more really affects temps. Lowest you will likely get is 10C CPU temps with cold air going across, that's all I got with negative ambients and more radiator surface area than you have.

Although I do have a somewhat worse block so that could change.

 

[Johan45]

75 water 25 coolant is what I run in mine for winter weather benching anything more really affects temps. Lowest you will likely get is 10C CPU temps with cold air going across, that's all I got with negative ambients and more radiator surface area than you have.

Although I do have a somewhat worse block so that could change.

Really?? I thought I would get better than that. What kind of set-up did you have?? That supernova 1260 looks like it came out of a 4 Cylinder car, it's quite big. Either way I had to finish this thing off so I can run my system 24/7 if I need to.

I was to late. Was gone when i messaged him. Still have my M5A97 EVO

Too bad that's a sweet board and it was a great price.

 

[cdawall]

Mcr220/320/420 with yate loon high speeds and ultra kazes. Running an old dtek fuzion v1 and one of the inserts

That was 10c load with a hot phenom ii.

 

[Johan45]

I think our raddage is pretty similar. This thing is 9x140mm fans on one side. The surface area is 420x420. I'm not sure how cold it gets where you live but in the winter here -20° at night is pretty standard. Most winters we'll have a few weeks where that's the high for the day and near -30 to -35° at night.
I'll soon find out.
Back to the mixture which is kindof why I asked about your temps. You think 25% is enough for that kind of cold?? We usually mix our cars 50/50.

 

[d1nky]

man I see my 0-10*c ambients and standard loop isn't going to stay in front for too long

best get a pot soon

 

[Johan45]

man I see my 0-10*c ambients and standard loop isn't going to stay in front for too long

best get a pot soon

I put a bid in on another board. Someone had a barely used CHV-z for $140 shipped. Have a guy that'll lend me a pot and Dice is $20 for a cooler full in London, On. I hope to get a taste before the winter is over.

 

[cdawall]

I think our raddage is pretty similar. This thing is 9x140mm fans on one side. The surface area is 420x420. I'm not sure how cold it gets where you live but in the winter here -20° at night is pretty standard. Most winters we'll have a few weeks where that's the high for the day and near -30 to -35° at night.
I'll soon find out.
Back to the mixture which is kindof why I asked about your temps. You think 25% is enough for that kind of cold?? We usually mix our cars 50/50.

Mine has a bit more fan now, but with 0F temps during the blizzard it never froze over with 75/25. That's all most guys run in water chillers.

Temps wise you likely get colder than me only in south dakota. Although this winter is shaping up to be a bit of a bitch. Already had one solid blizzard and they expect several more.

man I see my 0-10*c ambients and standard loop isn't going to stay in front for too long

best get a pot soon

I just have to find DICE or LN2 up here for mine pot is sitting next to the desk. Houston had an endless supply of both here I am having to search.

 

[d1nky]

I put a bid in on another board. Someone had a barely used CHV-z for $140 shipped. Have a guy that'll lend me a pot and Dice is $20 for a cooler full in London, On. I hope to get a taste before the winter is over.

NICE!

well im out of work for a bit, but I hope I will too.

I don't trust this mobo for subzero, so probably would get a CHVF or contact asrock again and say look bitches, im about to blow this up and send me a new one lol

 

[cdawall]

I will have to look in my box o goodies I might just have a spare pot...

 

[Johan45]

Mine has a bit more fan now, but with 0F temps during the blizzard it never froze over with 75/25. That's all most guys run in water chillers.

Temps wise you likely get colder than me only in south dakota. Although this winter is shaping up to be a bit of a bitch. Already had one solid blizzard and they expect several more.

0°f is about -18°c so it just might be fine. I'll keep an eye on it when it's really cold. Besides the rad won't be outside 24/7 only when I'm benching hard, so it won't sit out and freeze overnight.
The Gelids will put out over 100 cfm on high, so it can move a signifigant amout of air through it too.

 

[d1nky]

0°f is about -18°c so it just might be fine. I'll keep an eye on it when it's really cold. Besides the rad won't be outside 24/7 only when I'm benching hard, so it won't sit out and freeze overnight.
The Gelids will put out over 100 cfm on high, so it can move a signifigant amout of air through it too.

in those ambients, wouldn't it be as good as a passive (no-fans) rad?

be like a chunk of frozen metal, and water through it lol