- Joined
- Apr 11, 2009
- Messages
- 922 (0.17/day)
- Location
- London, UK
Processor | AMD FX 8350 Black Edition @ 4.2Ghz |
---|---|
Motherboard | Gigabyte 990FXA-UD3 Rev 4.0 |
Cooling | Corsair H100i |
Memory | Samsung Green 16GB 30nm 1600Mhz DDR3 |
Video Card(s) | XFX HD 7950 DD 3GB @ 850/5000Mhz |
Storage | 240GB Intel 520 SSD + 2TB Seagate Barracuda |
Display(s) | ASUS PB278Q 27" QHD |
Case | Fractal Design R5 Black |
Power Supply | Seasonic Platinum 760W |
Mouse | Corsair Raptor M40 |
Keyboard | Corsair Raptor K50 |
Software | Windows 10 Pro |
Hi there, long time!
This morning i installed my new Wifi/BT adapter into my PC Gigabyte GC-WB300D, (while it was still running stupidly)..
it is using a PCI-e x1 slot which is on top of the graphics card slot. i feel that i may have accidently touched the gpu with the card upon installation.
The problem im now getting is that in games the GPU load will not go above 50%, and the framerates now suffer.. if i run MSI Kombustor i get 100% gpu load and that seems to run fine, but games do not.
I have removed the Wifi card and ran games but the same issue is still there,
what could i look for to minimise the cause? i will try taking the graphics out and reseating it now, i dont see any obvious signs of burnt resistors etc.
specs are on the left
Thanks
This morning i installed my new Wifi/BT adapter into my PC Gigabyte GC-WB300D, (while it was still running stupidly)..
it is using a PCI-e x1 slot which is on top of the graphics card slot. i feel that i may have accidently touched the gpu with the card upon installation.
The problem im now getting is that in games the GPU load will not go above 50%, and the framerates now suffer.. if i run MSI Kombustor i get 100% gpu load and that seems to run fine, but games do not.
I have removed the Wifi card and ran games but the same issue is still there,
what could i look for to minimise the cause? i will try taking the graphics out and reseating it now, i dont see any obvious signs of burnt resistors etc.
specs are on the left
Thanks