- Joined
- Oct 7, 2013
- Messages
- 24 (0.01/day)
System Name | Personal Build |
---|---|
Processor | AMD A10-6800K APU OC'd to 4800MHz |
Motherboard | ASUS F2A85-V PRO |
Cooling | Cooler Master Seidon 120M Liquid Cooler with dual fans in push/pull config. |
Memory | 16GB Corsair CMZ16GXM2A1866C9 8GBx2 OC'd to 2133MHz |
Video Card(s) | iGPU Radeon HD 8670D OC'd to 1266MHz |
Storage | Kingston SH103S3120G 120GB SSD |
Display(s) | Acer 22" LED |
Case | Full Tower 11 bay ATX Case |
Power Supply | RAIDMAX RX-630SS 630 Watt |
Software | Windows 7 Ultimate 64-bit |
I've been running this particular memory at 2133MHz with no issues for quite some time. I decided to bump it up to 2400, and found timings for it. After setting it up, computer booted up just fine into Windows 7 and everything was running okay. Prime95 ran fine. I ran Windows Memory Diagnostic, and that's where everything went south. The diagnostic reported no errors, but upon the attempt to load Windows, it said my boot drive was damaged. This issue continued until I reset my memory back to the 2133 settings, then Windows booted fine. Now if I set it back to 2400, it boots up okay, then Prime95 runs, at at the end of a successful hour of running Prime95, I stop workers and get a BSOD when I stop the workers.
I'm new to overclocking still, and can't understand what's happening here. I don't get any errors when running Windows Memory Diagnostic, nor do I get any errors when running MemTest86.
My CPU during stress testing never gets above 44C, and the motherboard never gets above 28C. The memory stays cool to the touch, and my iGPU never gets above 56C when stressing the iGPU.
My motherboard supports the 2400 OC memory, and my A10-6800K is supposed to be able to run with 2400 OC memory as well. Where do I start to look for the issue?
I'm new to overclocking still, and can't understand what's happening here. I don't get any errors when running Windows Memory Diagnostic, nor do I get any errors when running MemTest86.
My CPU during stress testing never gets above 44C, and the motherboard never gets above 28C. The memory stays cool to the touch, and my iGPU never gets above 56C when stressing the iGPU.
My motherboard supports the 2400 OC memory, and my A10-6800K is supposed to be able to run with 2400 OC memory as well. Where do I start to look for the issue?