AMD FX OC'ers Club

Athlonite · Feb 27, 2014

thanks for the read Johan interesting indeed

YautjaLord · Feb 27, 2014

Athlonite said:
OK so that takes care of the Core Parking hotfix what about the Scheduling one shouldn't that be installed I don't remember MS putting out any other patch to solve this other than the Hotfix

I'll [most possibly] have CVF-Z by March 10, have these 2 hotfixes installed, see how it's (8350) reported in Scheduler/Task Manager/etc.. & give you a pics of it. Actually i'll see how this CPU performs with & without hotfixes. And sh*t - need to know how high i can actually OC 8350 under TR's VenomousX/2xUltraKazes/AS5 combo: 4.5GHz? 4.6?

Irony · Feb 28, 2014

Ya, looks like 4.5 is doable. Probly be getting toasty above that. Saw one on another thread in upper 50s at 4.4

Johan45 · Feb 28, 2014

YautjaLord said:
I'll [most possibly] have CVF-Z by March 10, have these 2 hotfixes installed, see how it's (8350) reported in Scheduler/Task Manager/etc.. & give you a pics of it. Actually i'll see how this CPU performs with & without hotfixes. And sh*t - need to know how high i can actually OC 8350 under TR's VenomousX/2xUltraKazes/AS5 combo: 4.5GHz? 4.6?

Ya Irony is pretty spot on. With air cooling you'd need to be a lucky one in the silicon lottery to get much higher than 4.6

YautjaLord · Feb 28, 2014

4.5GHz than. Will go for 5.0GHz once get my hands on Swiftech's H2O-220 Elite; why the f**k it costs so much? lol

P.S. Nice avatar johan45; i'd like to see who wins when pitted against each other - Berserker/Black Pred or Matriarch (Alien Queen). And i don't buy this sh*t that Royce won!!!! The only worse POS is AvP the movie. :laugh:

Johan45 · Mar 2, 2014

Ya I hear you about Royce, but they had to leave it open for another movie where they escape. I didn't mind AVP and technically the queen didn't die, AFAIK they don't need oxygen. I have been a huge Alien fan right from the beginning, people weren't ready for that and it scared the bejeebus out of them.

I did some playing around with the 9370 today and wanted to share. Too bad D1nky is stuck on the darkside.

@d1nky @Durvelle27
Here's 5869 all 8 cores http://valid.canardpc.com/x6bza3

And here's 5948 on 1 core http://valid.canardpc.com/a4fuy

d1nky · Mar 3, 2014

Yoo Johan my friend. I'm not fully on the darkside, still got an am3 motherboard lol.

Been working flat out lately, but seem to have less money...

I'll be buying another FX one day soon to go under cold, atm I'm collecting toys for it.

Nice clocks btw, what happened to make the jump from around 5.7 etc?

Johan45 · Mar 3, 2014

d1nky said:
Yoo Johan my friend. I'm not fully on the darkside, still got an am3 motherboard lol.

Been working flat out lately, but seem to have less money...

I'll be buying another FX one day soon to go under cold, atm I'm collecting toys for it.

Nice clocks btw, what happened to make the jump from around 5.7 etc?

Nothing really, I had benched Spi at 5.8 and realized I hadn't done a validation at those speeds. I wanted to get it in before the cold weather is gone. It's even colder today, I' going to take a stab at 6.0. It's only 2 more bumps on the FSB

Johan45 · Mar 3, 2014

Well I got it D1nkmeister 6.0 http://valid.canardpc.com/2hwhtk

Random Murderer · Mar 3, 2014

Johan45 said:
Well I got it D1nkmeister 6.0 http://valid.canardpc.com/2hwhtk

View attachment 55177

Congrats on breaking the big 6.0! :clap:

Johan45 · Mar 3, 2014

Thanks Random it was a real tear jerker crashed 3 times trying to validate but finally I snuck up on it and caught one. Did this on the way Hwbot prime all 8 cores and nearly 5900

psyko12 · Mar 4, 2014

Quick question guys, I've experimented with FSB+Multi overclocking (previously just using multipliers) I've got my chip stable @ 4.5 with 1.36v's but whenever I check my ghz in the system information within BIOS and boot logo screen it says I'm only at 4.3Ghz, while the actual FSB and Multi says am at 4.515Ghz.

Upon booting to windows and running some tests for stability it's rockin at 4.5Ghz vdroop is a minimum and volts aren't fluctuating and no thermal throttling as well.

When looking at the windows system properties it also tells me that it's at 4.30ghz whilst hwfino64 and cpu-z says I'm at 4.5Ghz, is this ok? Or there's something wrong with my OC?

EDIT: Strange thing is when I only use multiplier to oc it shows that I'm rated at 4.5Ghz... But the fsb and multi combo oc feels a lot more snappier all around....

Thanks for the enlightenment!

Johan45 · Mar 4, 2014

Don't know Psyko, It could be something to do with the board not registering the change in the reference clock properly for windows to recognize it. As for the bios not all boards will do a live clock update in bios whaen you change settings which will leave you guessing at times.

psyko12 · Mar 5, 2014

Johan45 said:
Don't know Psyko, It could be something to do with the board not registering the change in the reference clock properly for windows to recognize it. As for the bios not all boards will do a live clock update in bios whaen you change settings which will leave you guessing at times.

Hmm so as long as I am stable and not BSoD'ing with whatever task I do am all set? Or is there a way to correct this ?

Thanks!

Durvelle27 · Mar 5, 2014

No fair

Athlonite · Mar 5, 2014

psyko12 said:
Quick question guys, I've experimented with FSB+Multi overclocking (previously just using multipliers) I've got my chip stable @ 4.5 with 1.36v's but whenever I check my ghz in the system information within BIOS and boot logo screen it says I'm only at 4.3Ghz, while the actual FSB and Multi says am at 4.515Ghz.

Upon booting to windows and running some tests for stability it's rockin at 4.5Ghz vdroop is a minimum and volts aren't fluctuating and no thermal throttling as well.

When looking at the windows system properties it also tells me that it's at 4.30ghz whilst hwfino64 and cpu-z says I'm at 4.5Ghz, is this ok? Or there's something wrong with my OC?

EDIT: Strange thing is when I only use multiplier to oc it shows that I'm rated at 4.5Ghz... But the fsb and multi combo oc feels a lot more snappier all around....

Thanks for the enlightenment!

maybe windows expects an 200MHz FSB so thinks lower multi = lower speed (so it doesn't actually pay attention to the FSB)

Johan45 · Mar 5, 2014

psyko12 said:
Hmm so as long as I am stable and not BSoD'ing with whatever task I do am all set? Or is there a way to correct this ?

Thanks!

I still feel it has something to do with the way your Bios and Windows communicate. You said it didn't update the speed in bios when you when you change the FSB speed. You're already using the most current bios so I would save the profile that you are using and do a good CMOS clear. Power down, unplug your machine. Set the CMOS jumper and pull the battery. Let it sit for a few minutes. Then replace the battery, put the jumper back to normal position and restart. Go to bios and load your profile then see if it corrects itself. If you updated the bios when you got the board you should have done a CMOS clear at first start up. It's good practice and necessary to give it a clean slate. If this doesn't work and you're not experiencing any issues then I would leave it be for now.

psyko12 · Mar 7, 2014

Athlonite said:
maybe windows expects an 200MHz FSB so thinks lower multi = lower speed (so it doesn't actually pay attention to the FSB)

Johan45 said:
I still feel it has something to do with the way your Bios and Windows communicate. You said it didn't update the speed in bios when you when you change the FSB speed. You're already using the most current bios so I would save the profile that you are using and do a good CMOS clear. Power down, unplug your machine. Set the CMOS jumper and pull the battery. Let it sit for a few minutes. Then replace the battery, put the jumper back to normal position and restart. Go to bios and load your profile then see if it corrects itself. If you updated the bios when you got the board you should have done a CMOS clear at first start up. It's good practice and necessary to give it a clean slate. If this doesn't work and you're not experiencing any issues then I would leave it be for now.

Upon further investigation and googling, and the 990fxa club at ocnet, it's ok because windows only reads it via multiplier so for example if my proc was designed to run @ 200 x 20 (it would show as 4.0) and if I do oc via the bclk it will not register it. But as long as I am passing my stress tests and keeping my ram true to it's rated speeds without over clocking I'm good to go (the temps are good too even when it's summer here...)

Btw would I get temp advantage if I replace my xigma dark knight II's single fan to corsair's sp quiet 120mm pwm fans or would it be a waste of money?

Thanks

Johan45 · Mar 7, 2014

Well I wouldn't use the corsairs way overpriced for performance in my opinion. I have some that I got for a radiator and was disappointed really. The one fan on your heatsink turns at what 1500 RPM max?? If you want to improve I would get 2 fans that have a decent CFM/ Static pressure and will hit up to 2500 RPM under extreme load. I say extreme because it WILL be loud. The ones I had on my rad were NZXT's and hit over 100 CFM at 2500 rpm.

Norton · Mar 7, 2014

psyko12 said:
Upon further investigation and googling, and the 990fxa club at ocnet, it's ok because windows only reads it via multiplier so for example if my proc was designed to run @ 200 x 20 (it would show as 4.0) and if I do oc via the bclk it will not register it. But as long as I am passing my stress tests and keeping my ram true to it's rated speeds without over clocking I'm good to go (the temps are good too even when it's summer here...)

Btw would I get temp advantage if I replace my xigma dark knight II's single fan to corsair's sp quiet 120mm pwm fans or would it be a waste of money?

Thanks

Good info on the bclk/multi issue w/Windows! :toast:

A second fan will give you a 2-3C temp drop on the Xig Nighthawk. I would also avoid the Corsairs as Johan45 suggested. I would try to either source a 2nd Xig fan of similar spec or try Scythe/Noctua/Cougar fans in the 1,800rpm range*
*I have 1,500rpm Scythe's on one of mine and could really use the extra 300rpm in the Summer when I'm crunching on the rig :ohwell:

Athlonite · Mar 7, 2014

I'd have to agree about the scythe fans brilliant bang for the buck specially the gentle typhoon series or the silverstome AP120/123 fans which even though are lower in CFM the air is guided in such a way as to make up for it

psyko12 · Mar 8, 2014

Johan45 said:
Well I wouldn't use the corsairs way overpriced for performance in my opinion. I have some that I got for a radiator and was disappointed really. The one fan on your heatsink turns at what 1500 RPM max?? If you want to improve I would get 2 fans that have a decent CFM/ Static pressure and will hit up to 2500 RPM under extreme load. I say extreme because it WILL be loud. The ones I had on my rad were NZXT's and hit over 100 CFM at 2500 rpm.

Norton said:
Good info on the bclk/multi issue w/Windows!

A second fan will give you a 2-3C temp drop on the Xig Nighthawk. I would also avoid the Corsairs as Johan45 suggested. I would try to either source a 2nd Xig fan of similar spec or try Scythe/Noctua/Cougar fans in the 1,800rpm range*
*I have 1,500rpm Scythe's on one of mine and could really use the extra 300rpm in the Summer when I'm crunching on the rig

Athlonite said:
I'd have to agree about the scythe fans brilliant bang for the buck specially the gentle typhoon series or the silverstome AP120/123 fans which even though are lower in CFM the air is guided in such a way as to make up for it

The Xiggy fan goes max 2200 rpm, I can nab a gentle typhoon around my local area, but I might as well consider getting a NH-D14, would there be a difference on them? If not prolly save up for a closed liquid cooler.

Altho going air the Xiggy handles 4.5ghz single fan max temps on all bechies play around at 57-60c, regular day to day gaming just high 40s and never hits 50c.

Thanks yo!

Thanks guys!

Norton · Mar 8, 2014

psyko12 said:
The Xiggy fan goes max 2200 rpm, I can nab a gentle typhoon around my local area, but I might as well consider getting a NH-D14, would there be a difference on them? If not prolly save up for a closed liquid cooler.

Altho going air the Xiggy handles 4.5ghz single fan max temps on all bechies play around at 57-60c, regular day to day gaming just high 40s and never hits 50c.

Thanks yo!

Thanks guys!

Those temps are fine... I would just leave it at that and enjoy!

psyko12 · Mar 8, 2014

Well I found some of the Scythe fans available which ones are they?
http://dynaquestpc.com/product/gentle-typhoon-120-mm-1850-rpm-d1225c12b5ap-15/
http://dynaquestpc.com/product/scythe-gentle-typhoon-120mm-4250-rpm-fan-d1225c12b9ap-30/
http://dynaquestpc.com/product/gentle-typhoon-120-mm-5400-rpm-d1225c12bbap-31/
or
http://dynaquestpc.com/product/scythe-slip-stream-slim-120mm-2000-rpm-case-fan-sy1212sl12h/

Durvelle27 · Mar 8, 2014

I use some Swiftech Helix 120MM fans and lovem

System Name	Cumquat 2021
Processor	AMD RyZen R7 7800X3D
Motherboard	Asus Strix X670E - E Gaming WIFI
Cooling	Deep Cool LT720 + CM MasterGel Pro TP + Lian Li Uni Fan V2
Memory	32GB GSkill Trident Z5 Neo 6000
Video Card(s)	Sapphire Nitro+ OC RX6800 16GB DDR6 2270Cclk / 2010Mclk
Storage	1x Adata SX8200PRO NVMe 1TB gen3 x4 1X Samsung 980 Pro NVMe Gen 4 x4 1TB, 12TB of HDD Storage
Display(s)	AOC 24G2 IPS 144Hz FreeSync Premium 1920x1080p
Case	Lian Li O11D XL ROG edition
Audio Device(s)	RX6800 via HDMI + Pioneer VSX-531 amp Technics 100W 5.1 Speaker set
Power Supply	EVGA 1000W G5 Gold
Mouse	Logitech G502 Proteus Core Wired
Keyboard	Logitech G915 Wireless
Software	Windows 11 X64 PRO (build 23H2)
Benchmark Scores	it sucks even more less now ;)

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

System Name	Torquey Vulture
Processor	Ryzen 5 2600
Motherboard	Gigabyte B450 MiniITX
Cooling	DDC water loop, EK block
Memory	16GB Patriot Viper RGB
Video Card(s)	EVGA 1070
Storage	500gb NVME; some Phat HDDs
Display(s)	Achieva Shimian 27" 2560x1440
Case	Thermaltake V1 MiniITX
Power Supply	EVGA supernova 850 G2
Mouse	Corsair Harpoon
Keyboard	Possibly the cheapest you can buy. Shift key broke recently. Space sounds like I'm kicking a ham
Software	Windows 10

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

AMD FX OC'ers Club

Athlonite

YautjaLord

Irony

Johan45

YautjaLord

Johan45

d1nky

Johan45

Johan45

Random Murderer

The Anti-Midas

Johan45

psyko12

Johan45

psyko12

Durvelle27

Moderator

Athlonite

Johan45

psyko12

Johan45

Norton

Moderator - Returning from the Darkness

Athlonite

psyko12

Norton

Moderator - Returning from the Darkness

psyko12

Durvelle27

Moderator

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

System Name	TOO MUCH RADIATOR! \| The TV Box a.k.a. The Shoebox
Processor	Core i7 4930K @ 4.5GHz \| Core i5 6600K @ 4.5GHz
Motherboard	Asus X79 Rampage IV Extreme \| Asus Z170i Pro Gaming
Cooling	Custom water on CPU and GPU, dual 360mm radiators \| Corsair H80i
Memory	4x 8GB G.Skill TridentX DDR3-1600 \| 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s)	Sapphire AMD R9 295x2 \| PowerColor AMD HD7970
Storage	Samsung SSD 830 256GB, various others \| 2x 1TB Seagate Barracudas in RAID1
Display(s)	Dell U2713HM 2560x1440 IPS \| Panasonic TC-L32E5 1080p IPS TV
Case	Thermaltake Suppressor F51 (stripped down to hold two radiators) \| Cooler Master Elite 130
Audio Device(s)	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 \| HDMI sound device on 7970
Power Supply	LEPA G1600-MA 1600W \| Corsair CX750M 750W
Software	Win 10 64
Benchmark Scores	over 9000 BungholioMarks, "Bitchin' Fast"

System Name	Zangief (Reborn)
Processor	AMD Ryzen R7 1700X @ 3.825ghz , 1.35v
Motherboard	Gigabyte GA-AX370 Gaming K7 Rev 1.0 BIOS F51e
Cooling	Noctua NH-D15 Push / Push Config \| 2x ML120 \| 2x Phanteks 120 mm
Memory	2x8GB G.Skill Trident Z @ 3200mhz cl 16 @ 1.45v
Video Card(s)	Gigabyte Aorus GTX 1080 +100 core / +550 mem
Storage	250 GB Samsung Evo 850 / 1tb WD Black / 4tb WD Blue / 512GB Adata XPG Pro SX8200
Display(s)	Acer Predator XB271HU \|Asus VX239H 23" AH-IPS Led
Case	Phanteks Enthoo Pro M TG
Audio Device(s)	On Board Realtek HD / Logitech G633/G933 Gaming Headset / Corsair H70 Pro Wireless
Power Supply	Corsair HX750i
Mouse	Logitech G903 and G602 Wireless Gaming \| Logitech Proteus Core G502
Keyboard	Corsair K70 Cherry Red \| Corsair K70 RGB MK.2 Cherry Browns \| Akko 3908N TTC Flame Reds
Software	Windows 11 Pro

System Name	Black Prometheus
Processor	\|AMD Ryzen 7 1700X
Motherboard	ASRock B550M Pro4\|MSI X370 Gaming PLUS
Cooling	Thermalright PA120 SE \| AMD Stock Cooler
Memory	G.Skill 64GB(2x32GB) 3200MHz \| 32GB(4x8GB) DDR4
Video Card(s)	\|AMD R9 290
Storage	Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s)	LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case	DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s)	LG Dolby Atmos 5.1
Power Supply	Corsair RMX850 Fully Modular\| EVGA 750W G2
Mouse	Logitech Trackman
Keyboard	Logitech K350
Software	Windows 10 EDU x64

System Name	Main PC- Gamer- Main Cruncher/Folder and too many crunching/folding rigs
Processor	Ryzen 5900X- Ryzen 5950X- Ryzen 3950X and etc...
Motherboard	Asrock X570 Extreme4- MSI X570S Tomahawk MAX WiFi- MSI B450M Bazooka Max and etc...
Cooling	Noctua NH-U14S (dual fan)- EK 360 AIO with push/pull fans- Corsair H115i RGB Pro XT and etc...
Memory	2x16GB GSkill FlareX 3200/c14- 4x8GB Corsair Vengeance 3600/c16- 2x16GB Team 3600/c18 and etc..
Video Card(s)	MSI Gaming RX 6800- Asus RTX 3070 TUF OC- MSI Ventus GTX 1660Ti and etc...
Storage	Main PC (1TB WD SN850- 2TB PNY CS 3040- 2TB Seagate Firecuda) and etc...
Display(s)	Main PC (2x24" Dell UltraSharp U2414H)
Case	Phanteks P600s- Seasonic Q704- Fractal Meshify C and etc...
Audio Device(s)	Logitech Z625 THX 2.1 speakers
Power Supply	EVGA 750 G3- SeaSonic DGC 750- EVGA P2 850 and etc...
Mouse	G300s
Keyboard	Corsair K65
VR HMD	N/A
Software	Windows 10 Pro or Ubuntu
Benchmark Scores	Why sit on the Bench when you can get in the game and Crunch!!!