- Joined
- Mar 8, 2014
- Messages
- 3 (0.00/day)
Hi to all,
Can anybody give me some feedback on this, pleeeeeaaaaaaase...
Here's the link to some detailed readouts as well as new screens. All were taken while Prime was running in Blend for 45 min - 1hr. I've done total re-clocking from scratch today, no clear CMOS though. The weird thing is I've never managed to pushed it up so high on so low voltage before and get such temps. Gives me an incentive to go higher. I'm very curious what would be your feedback.
Now CPU Freq is 256 at CPU Voltage Control 1.375V. There were discrepancies among these values set in BIOS and Windows & sys info tools readings. I know voltage can fluctuate but CPU Freq from mid 2-forties to 254 were always 1 lower in OS than in BIOS, 248 was 247, 250 was 249 etc. Only Sandra got it always right. Now it's OK everywhere.
Cool N Quiet: Disabled
Smart CPU Fan Control: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
HT Spread Spectrum: Disabled
and then: K8<->NB HT Speed: 3x
K8<->NB HT Width: Auto
CR: 1T
Win on performance mode
I don't think I have C1/E and C6 options in my Bios.
https://drive.google.com/folderview?id=0B8tfWk0vzmviN1dEUFZ1WUY4NVE&usp=sharing
Can anybody give me some feedback on this, pleeeeeaaaaaaase...
Here's the link to some detailed readouts as well as new screens. All were taken while Prime was running in Blend for 45 min - 1hr. I've done total re-clocking from scratch today, no clear CMOS though. The weird thing is I've never managed to pushed it up so high on so low voltage before and get such temps. Gives me an incentive to go higher. I'm very curious what would be your feedback.
Now CPU Freq is 256 at CPU Voltage Control 1.375V. There were discrepancies among these values set in BIOS and Windows & sys info tools readings. I know voltage can fluctuate but CPU Freq from mid 2-forties to 254 were always 1 lower in OS than in BIOS, 248 was 247, 250 was 249 etc. Only Sandra got it always right. Now it's OK everywhere.
Cool N Quiet: Disabled
Smart CPU Fan Control: Disabled
PCIE Spread Spectrum: Disabled
SATA Spread Spectrum: Disabled
HT Spread Spectrum: Disabled
and then: K8<->NB HT Speed: 3x
K8<->NB HT Width: Auto
CR: 1T
Win on performance mode
I don't think I have C1/E and C6 options in my Bios.
https://drive.google.com/folderview?id=0B8tfWk0vzmviN1dEUFZ1WUY4NVE&usp=sharing