• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

No Video

KuyaArnold

KuyaArnold

Joined
May 5, 2014
Messages
38 (0.01/day)
System Specs
Processor AMD FX 6300
Motherboard Asrock 960GC-GS FX
Cooling Hyper 212X
Memory Kingston HyperX 8GB DDR3 1600
Video Card(s) EVGA SSC GTX 960
Storage Seagate Barracuda 1TB
Display(s) Samsung LS20D300
Case Cooler Master N500
Audio Device(s) NONE
Power Supply Aerocool Strike X 600w
Software Win 8.1
So I just set up my PC.. It turns on.. all the fans are spinning, the HDD is working and the GPU is working..

But I cant get any video.. How do I know if its working?

I tried plugging it on the motherboard's vga and also on the graphics card but still nothing..
 
Tallencor

Tallencor

TPU's First Patreon
Supporter
Joined
Nov 25, 2013
Messages
789 (0.21/day)
Location
N.S. Can.
System Specs
System Name Francis
Processor 7700k @5.0 delid
Motherboard Rog Maximus IX Code
Cooling Corsair H100i V2
Memory 32 GB Gskill Trident Z RGB 3200 xmp
Video Card(s) MSI RX 480 Gaming x 8G
Storage Samsung960evo250GB os Samsung 860 evo 500GB (Games)Samsung 840 120 (Storage)
Display(s) Viewsonic XG 2701 Freesync
Case Corsair Crystal 570x
Audio Device(s) On board Supreme FX
Power Supply Evga 850 G3
Mouse Logitech G900
Keyboard Logitech G810
Software Win 10 Home 64
Benchmark Scores 11+12=19?
Remove the video card and plug your monitor into the on board video. Does it display then? If so leave the on board plugged in and re install the card. Post. If it is still displaying d/l latest driver for card and install. Turn off pc and reset cable to the card. You may have to enter hardware manager and disable your on board video or set initial display as pci in bios. Let us know if that worked.
Edit: Can you fill in your system specs please.
 
Law-II

Law-II

Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Specs
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

vga card blank screen @ Bios?

reseat the vga card
check *8/6 pin power cables are secure [If required]
clear CMOS
check output from PSU

[use minimal hardware setup] out side of the case: PSU, Motherboard, CPU & Heatsink, single stick of memory and *vga card [*If Required] [plug-in keyboard and mouse - boot to bios]
Note: minimal dose not include SSD/HDD Windows or Other; an OS is not required or advisable when testing vga cards

Note: for the best advice from the TPU community, fill in full system specs here include brand names, models and OS

General Info here

atb

Law-II
 
Last edited:
KuyaArnold

KuyaArnold

Joined
May 5, 2014
Messages
38 (0.01/day)
System Specs
Processor AMD FX 6300
Motherboard Asrock 960GC-GS FX
Cooling Hyper 212X
Memory Kingston HyperX 8GB DDR3 1600
Video Card(s) EVGA SSC GTX 960
Storage Seagate Barracuda 1TB
Display(s) Samsung LS20D300
Case Cooler Master N500
Audio Device(s) NONE
Power Supply Aerocool Strike X 600w
Software Win 8.1
Tallencor said:
Remove the video card and plug your monitor into the on board video. Does it display then? If so leave the on board plugged in and re install the card. Post. If it is still displaying d/l latest driver for card and install. Turn off pc and reset cable to the card. You may have to enter hardware manager and disable your on board video or set initial display as pci in bios. Let us know if that worked.
Edit: Can you fill in your system specs please.
Click to expand...


Can't even get to BIOS or even POST.. No Beeping but almost everythings running...
 
KuyaArnold

KuyaArnold

Joined
May 5, 2014
Messages
38 (0.01/day)
System Specs
Processor AMD FX 6300
Motherboard Asrock 960GC-GS FX
Cooling Hyper 212X
Memory Kingston HyperX 8GB DDR3 1600
Video Card(s) EVGA SSC GTX 960
Storage Seagate Barracuda 1TB
Display(s) Samsung LS20D300
Case Cooler Master N500
Audio Device(s) NONE
Power Supply Aerocool Strike X 600w
Software Win 8.1
Law-II said:
Hi

vga card blank screen @ Bios?

reseat the vga card
check *8/6 pin power cables are secure [If required]
clear CMOS
check output from PSU

[use minimal hardware setup] out side of the case: PSU, Motherboard, CPU & Heatsink, single stick of memory and *vga card [*If Required] [plug-in keyboard and mouse - boot to bios]
Note: minimal dose not include SSD/HDD Windows or Other; an OS is not required or advisable when testing vga cards

Note: for the best advice from the TPU community, fill in full system specs here include brand names, models and OS

General Info here

atb

Law-II
Click to expand...


Done :) Thank you
 
You must log in or register to reply here.
Top