• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

My Gpu went awol help

Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

I already did tons of reseats.And its till missing.

may require PCI vga card or [use another motherboard with on-board vga / igp {integrated graphic processor}]
Using a PCI vga card [attach monitor to this]
Place 7950 in primary PCIe slot 0
atiflash -ai 0

or

Place 7950 in primary PCIe slot 0
& Blind flash
[idea posted here by Ferrum Master]

Blind Flashing

prepare the system as if were able to see video on monitor
write down commands on paper
*wait till the bootable flash drive gets to the DOS prompt [*go make a cup of tea]
type the commands on to the keyboard
wait a few minutes for flash process to finish
reboot the system
remove the flash drive


note: don't forget to take a break, get some rest

atb

Law-II
 
Last edited:
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
Hi



may require PCI vga card or [use another motherboard with on-board vga / igp {integrated graphic processor}]
Using a PCI vga card [attach monitor to this]
Place 7950 in primary PCIe slot 0
atiflash -ai 0

or

Place 7950 in primary PCIe slot 0
& Blind flash
[original idea posted here by Ferrum Master]

Blind Flashing

prepare the system as if were able to see video on monitor
write down commands on paper
*wait till the bootable flash drive gets to the DOS prompt [*go make a cup of tea]
type the commands on to the keyboard
wait a few minutes for flash process to finish
reboot the system
remove the flash drive


note: don't forget to take a break, get some rest

atb

Law-II
okay i will definity try this.
 
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
I moved my Graphic card to another slot and scanned it via atiflash no luck but i keep getting detected at 0 that its always the same chip and i know that i have on my main a tahiti one and on other something older forgot whats the name . Is like my graphic dead my fans run with no problems
 
Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

This is the last trick I am aware of, if this dose not work get a professional to flash the card, good luck

I moved my Graphic card to another slot and scanned it via atiflash no luck but i keep getting detected at 0 that its always the same chip and i know that i have on my main a tahiti one and on other something older forgot whats the name . Is like my graphic dead my fans run with no problems

Will require the following;
- onboard vga / igp, pci vga card or have a dual pcie mobo and spare pcie vga card

- bootable flash drive
Download - HP USB Disk Storage Format Tool - v2.1.8 & Windows 98 System Files
go here - http://files.extremeoverclocking.com/browse.php?c=21

click Primary Download unzip the files to a folder on your HDD; make sure your USB Memory stick is attached to your PC; open HP USB Disk

Storage Format Tool v2.1.8 ; select Creat a DOS startup disk/ select: using DOS system files located at: (these are the files you have just downloaded): browse to the files in win98boot; then start the process.

- up to date version of ati flash go here - http://www.techpowerup.com/downloads...atiflash-3-99/

- Original and or backup copy of the bios image for the vga card

- copy atiflash and vbios image [#VbiosName#.rom] to the flash drive, enter the mobo bios and make PC bootable from USB device

- length of wire * long enough for the loop to be cut with wire cutters or snips [pref wire from an eighty pin ide cable or similar]

Example:
1 & 8 pin wire loop vga vbios.jpg

- connect pin 1 and pin 8 on the vga vbios chip [solder or loop the wire *make sure the wire is in good contact and that no exposed wire makes contact with other parts of the PCB]

- boot the system with wire attached

-Type at the dos prompt; atiflash -unlockrom 1 to unlock the gpu in adapter 1 [Note: 0 is the primary card PCIe slot one & 1 is the secondary PCIe slot two][*may be required]

- type at dos promt atiflash -ai 0 [1 if the card is inserted in PCIE x16 slot 1 on the mobo and booting from onboard vga/iGP or PCI vga card default to 0]

- *if card is identifyed by atiflash!* cut wire

- flash card with original and or backup of original vbios image; type at the dos promt atiflash -f -p 0 #VbiosName#.rom

atiflash commands here - http://www.techpowerup.com/forums/sh...ad.php?t=57750
Thanks go out to CrackerJack
Fixing a completely gone wrong ATI BIOS flash.pdf
Thanks go out to Frogger

atb

Law-II
 
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
Hi

This is the last trick I am aware of, if this dose not work get a professional to flash the card, good luck



Will require the following;
- onboard vga / igp, pci vga card or have a dual pcie mobo and spare pcie vga card

- bootable flash drive
Download - HP USB Disk Storage Format Tool - v2.1.8 & Windows 98 System Files
go here - http://files.extremeoverclocking.com/browse.php?c=21

click Primary Download unzip the files to a folder on your HDD; make sure your USB Memory stick is attached to your PC; open HP USB Disk

Storage Format Tool v2.1.8 ; select Creat a DOS startup disk/ select: using DOS system files located at: (these are the files you have just downloaded): browse to the files in win98boot; then start the process.

- up to date version of ati flash go here - http://www.techpowerup.com/downloads...atiflash-3-99/

- Original and or backup copy of the bios image for the vga card

- copy atiflash and vbios image [#VbiosName#.rom] to the flash drive, enter the mobo bios and make PC bootable from USB device

- length of wire * long enough for the loop to be cut with wire cutters or snips [pref wire from an eighty pin ide cable or similar]

Example:
View attachment 61036

- connect pin 1 and pin 8 on the vga vbios chip [solder or loop the wire *make sure the wire is in good contact and that no exposed wire makes contact with other parts of the PCB]

- boot the system with wire attached

-Type at the dos prompt; atiflash -unlockrom 1 to unlock the gpu in adapter 1 [Note: 0 is the primary card PCIe slot one & 1 is the secondary PCIe slot two][*may be required]

- type at dos promt atiflash -ai 0 [1 if the card is inserted in PCIE x16 slot 1 on the mobo and booting from onboard vga/iGP or PCI vga card default to 0]

- *if card is identifyed by atiflash!* cut wire

- flash card with original and or backup of original vbios image; type at the dos promt atiflash -f -p 0 #VbiosName#.rom

atiflash commands here - http://www.techpowerup.com/forums/sh...ad.php?t=57750
Thanks go out to CrackerJack
Fixing a completely gone wrong ATI BIOS flash.pdf
Thanks go out to Frogger

atb

Law-II

Okay will report tommorow realy have to get some rest.
 
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
I would like to ask where should i put my wire ? could anyone draw or show pic like on same gpu ?
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.58/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
There should be a xfx rep here
 
Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

I would like to ask where should i put my wire ? could anyone draw or show pic like on same gpu ?
Should be Pm25LV010 or Pm25L XXXX on the surface of the 8pin chip is inscribed/printed with its datasheet reference number
*Example of Vbios Chip from HD 5970
Pm25LV010 small.jpg

[dot next to pin 1 with arrow pointing at it]

Note:
If possible, upload high definition pictures of the XFX 7950's PCB front and back
[select: TPU web site select: MORE select: FREE IMAGE HOSTING]

atb

Law-II
 
Last edited:
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
Hi


Should be Pm25LV010 or Pm25L XXXX on the surface of the 8pin chip is inscribed/printed with its datasheet reference number
*Example of Vbios Chip from HD 5970
View attachment 61057
[dot next to pin 1 with arrow pointing at it]

Note:
If possible, upload high definition pictures of the XFX 7950's PCB front and back
[select: TPU web site select: MORE select: FREE IMAGE HOSTING]

atb

Law-II
I sadly cant find any chip with that info on it .
 
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
I sadly cant find any chip with that info on it .
sadly i have not a good phone ill try to find some hq pics on net
 
Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

These are the best pic's I could find but still need you to take a closer look at the physical card

sadly i have not a good phone ill try to find some hq pics on net
Reverse of xfx 7950 vga card
Source here from ixbt.com

Front of xfx 7950 vga card
Source here from ixbt.com

section I require You look at
XFX 7950 Vbios Chip highlight.jpg

Very important Confirm Number from this eight pin chip; is under fan-sink shroud on front of vga pcb [may require magnifying glass and very bright light to see well]

I sadly cant find any chip with that info on it .
What eight pin chip numbers are on card? [can look up datasheet to find out if they are Vbios chip]

atb

Law-II
 
Last edited:
Joined
Jan 25, 2014
Messages
2,069 (0.55/day)
System Name Ryzen 2023
Processor AMD Ryzen 7 7700
Motherboard Asrock B650E Steel Legend Wifi
Cooling Noctua NH-D15
Memory G Skill Flare X5 2x16gb cl32@6000 MHz
Video Card(s) Sapphire Radeon RX 6950 XT Nitro + gaming Oc
Storage WESTERN DIGITAL 1TB 64MB 7k SATA600 Blue WD10EZEX, WD Black SN850X 1Tb nvme
Display(s) LG 27GP850P-B
Case Corsair 5000D airflow tempered glass
Power Supply Seasonic Prime GX-850W
Mouse A4Tech V7M bloody
Keyboard Genius KB-G255
Software Windows 10 64bit
Joined
Dec 18, 2014
Messages
66 (0.02/day)
System Name my Budget :)
Processor AMD FX-6300
Motherboard Gigabyte 970A-DS3P
Cooling Zalaman CNPS10x Optima
Memory Kingston HyperX FURY 8GB 1600MHz CL10-10-10@1.5v
Video Card(s) 280x Vapor 3Gb Dualfan
Storage 1T Barracuda Black
Power Supply XFX 550W
Software Windows 7 64bit
Hi

These are the best pic's I could find but still need you to take a closer look at the physical card


Reverse of xfx 7950 vga card
Source here from ixbt.com

Front of xfx 7950 vga card
Source here from ixbt.com

section I require You look at
View attachment 61067
Very important Confirm Number from this eight pin chip; is under fan-sink shroud on front of vga pcb [may require magnifying glass and very bright light to see well]


What eight pin chip numbers are on card? [can look up datasheet to find out if they are Vbios chip]

atb

Law-II
damn thanks alot u actualy found it out :) its the same number as you posted few posts up
 
Top